one brake away from a whiplash :p I still feel 1/10th scale vehicles fit so much better
@comicsandstuffofficial
Жыл бұрын
Such a dangerous car to drive lol…depends on how big the figure in my opinion…larger marvel legends seem to fit good in 1/10 but smaller/slender figures I prefer in the 1/12 vehicles I got so far…but I only have the Bratz car for reference… I might have to pick me up more 1/10 scale cars 🤦♂️
@stangreen4134
Жыл бұрын
I have the scooby do van and the Jack Slater car from Last action hero.
@comicsandstuffofficial
Жыл бұрын
@stangreen4134 both great cars! I’ve been looking to get the jack slater car for awhile lol
@mugloviofilms7972
Жыл бұрын
Awesome work.
@comicsandstuffofficial
Жыл бұрын
Thanks a lot bro!!😁🙏🙏
@heeroyuy809
3 ай бұрын
Sh figuarts will be perfect
@comicsandstuffofficial
3 ай бұрын
Yesssss figma figures fit perfectly in it(got shorts with the Lanna Figma figure if you wanna see how that looks)…Sh figuarts I would think would have similar results
@Toy_The_Poser
9 ай бұрын
I don't care what the package says. That WAS NOT a 1:12 scale car. And even if it was "supposed" to be. A 1:12 scale figure DID NOT fit it. Even after the modifications. The all the figures where too big. No normally, regular sized person's head is ABOVE the cars windshield. And even without a windshield. The back of the car seat would touch the back of a regular person's head. Hince the name "HEADREST".🤷🏿♂️
@comicsandstuffofficial
9 ай бұрын
Yea it’s really more on line with import sized 1/12…I got a series of shorts with my lanna figma figure trying out each car…she fits lovely in them…headrest on head and everything lol…check them out when you have a chance 😁
@ucitymetalhead
Жыл бұрын
Have you ever seen the rc Suzuki jimny it's super detailed and a bit better for figures.
@comicsandstuffofficial
Жыл бұрын
Yea I’ve been eyeing that one for quite some time lol…looks perfect for figures
@garnetnelson1419
9 ай бұрын
U forgot to cut the base of the seats out to allow them to sit deeper in the car. So much fir “SUSSESS” the word os Success (Suck SESS) not sussess 😑🤦🏽♂️
@comicsandstuffofficial
9 ай бұрын
You* for* is*……….no offense but I’m not taking grammar advice from you lol…plus I don’t see where I spelled the word success wrong…just checked the description and the word is not even there
@arturbaranski9698
8 ай бұрын
Steering this car is fucking terrible, huge latency of forward and backward, before it will stop it will hit the wall, leaving permamament marks on the front and rear !
@comicsandstuffofficial
8 ай бұрын
Not the best at allll….mines got a few dings since the video now 😂
@pedromajao
Жыл бұрын
awesome video cyclops looked the best
@comicsandstuffofficial
Жыл бұрын
Right?!? 😂….I thought so too lol
@MatenDigitiZer
Жыл бұрын
I wonder if sh figuarts will work?
@comicsandstuffofficial
Жыл бұрын
I’m thinking imports could fit without any modding since they’re a little smaller…just got my first figma and she looks like she would’ve fit in without much of a problem…at the very least I think it would be fudgible lol
@MatenDigitiZer
Жыл бұрын
@@comicsandstuffofficial i hope. I’m looking at the Sian Roadster Lamborghini by MIEBELY. I’m hoping that will work
@comicsandstuffofficial
Жыл бұрын
Was looking at a couple of MEIBELYS before opting for the rastar because it had no windshield lol…just saw the one you talking about and it says the length is 17.7 inches which is already a good sign since that’s about 2 inches bigger than the aventador…might even be a better for joes and marvel legends….now I feel like buying one 🤦♂️lol
@MatenDigitiZer
Жыл бұрын
@@comicsandstuffofficial I ended up getting the meibley Lamborghini. It scales well but unfortunately the figures won’t fit due the interior molding
@comicsandstuffofficial
Жыл бұрын
Ever since you mentioned it I been wanting to get it 😂…are they close to fitting?? Or is there no chance at all?Maybe cutting some holes on the floor would work just like the rastar cars…the size of it makes it tempting to get lol
@stevelock6560
Жыл бұрын
i love the car
@comicsandstuffofficial
Жыл бұрын
It’s friggin awesome bro lol
@curseoffenrir
Жыл бұрын
Way to small, an actual person in that car would sit much lower, shoulder level with the door. Looks more like a go-kart 😂 I’d like to see it with some 1/18 in it
@comicsandstuffofficial
Жыл бұрын
Got a couple of shorts with the lanna figma figure if you wanna see how that looks…sits in it a bit more comfortably…also negasonic sits comfortably as well..her comparison with it are in my deadpool shorts 😁
@cyberfrank-bx2nv
Жыл бұрын
euhhh, the heads should fit the head rests of the seats... you should find 1/11 cars, or 1/10. it does nt look accurate to me, the brats car looks best. the problem has to be the figures, they re not really 1 /12. it makes sense, as they re supposed to be 6' - 6'5 as super heroes, very tall. no windsheilds is not realistic bro, come on! I d want cars that look real, while you look desperate... I have yet to see a line that really looks natural, and this ain t it. most videos I have seen, people need to cut off the seats... that s no good. sadly, I think we need to go more expensive, like upper scale models, or rcs. for dios, it s worth it however, bikes and cars make a scene look fab.. if it fits good. I ll keep checking until you find the right stuff bro, I m patient, keep looking! good show.
@comicsandstuffofficial
Жыл бұрын
Personally I think out of the cars I’ve reviewed so far the Bratz car looks the worst for 1/12 figures….especially for Wolverine, female figures and the classified series line…hulk and colossus fit in with basically no problem….I don’t think that would be particularly accurate in real life lol…for 7 inch figures it’s great as well as the larger marvel legends. And although no windshield sounds ridiculous let’s not forget that this is an actual car that’s actually sold. So yea no windshield might not be a common thing but there are people out there driving this (rich people but still people driving it lol). Each figure fits in differently though in this car and I see what you saying about the heads on the head rests…some figures manage it (negasonic teenage warhead a good example check out my deadpool short to see that one) but overall most figures that aren’t female or Wolverine didn’t….so although I disagree about the Bratz car imma have to agree with trying out the higher end stuff…don’t worry i got several cars to review on the horizon and a couple are some higher end rcs…stay tuned for the next car episode…my quest for Wolverines perfect vehicle continues 😁
@cyberfrank-bx2nv
Жыл бұрын
@@comicsandstuffofficial totally agree bro! I m looking forward to your imminent success, I m with you, we fans have to have decent cars for nice scenes such as yours, bravo!
@comicsandstuffofficial
Жыл бұрын
Thanks bro! Definitely important to know what’s out there lol…I miss the days of vehicles for figures being a more common thing
@joesmoe1347
Жыл бұрын
All of them look bad in allnof the cars. Now a slightly smaller scale would be perfect
@comicsandstuffofficial
Жыл бұрын
Smaller??? I actually think a slightly larger scale would be perfect…I got a few on track…keep watching 😑lol
Пікірлер: 50