Mine was sitting there unused for two years covered in AZ dust, I'm surprised how easy it was to crank up. I just flipped power rocker to On and the beast went alive like no big deal, from 72F to 90F in 3 or so hours for 17000 gallon pool. Pentair intelliflo 2 VST was running at 3300 RPM.
@MrGabriel1973
3 жыл бұрын
love video thanks
@MrGabriel1973
3 жыл бұрын
im about to install one of this but wondering if 1/2 gas pipeline is thick enought to this heater?
@ollagluca1493
Жыл бұрын
I installed in myinground pool. I don’t have a spa just regular pool. I see in the menu pool temp and spa temp. Both are working but what’s the difference? Thanks
@OLeonOfficial
5 жыл бұрын
What is the minimum speed required for this heater to run? I have a variable pump and I am not sure about the speed needed. Thanks.
@lukepoolservice
3 жыл бұрын
Depends on the pool. I would say 2500
@robertcrawford5932
28 күн бұрын
I'm looking to purchase this unit. What regulator is need or does it have an automatic adjustment where a regulator is not needed?
@KShags388
Жыл бұрын
Hi, I just bought this unit. For some reason I didn’t turn the pump off and opened all valves so there wasn’t a pressure build up in the heater and then closed the heater valves. This was so I could run the pump and bypass the heater to shock the pool. It sounded like pressure building in the heater so I quickly opened the valves again right away. Anyway it now says water switch open and won’t turn the heat on. Is there a reset for that or do you think I blew something up? I’m really beating myself up over this mostly because I have small kids that won’t be able to swim now because Dad screwed up. I learned to turn the pump off before closing/opening any valves. Any help would be so greatly appreciated! Thank you!
@lukepoolservice
Жыл бұрын
Call for help. Complex machine.
@Jaysonthomas128
7 жыл бұрын
Any idea... My raypak is on rem on but the temperature reads the manual spa temp from the heater and is using that setting. When it first turns on it displays 84 which is the pentair control panel setting, then it changes to spa from the raypak heater setting and stays there. Temp can't be changed on heater control unless I take it out of rem on. Pool company changed a board in the heater last year, could it be hooked up wrong?
@jennieorlandini4159
5 жыл бұрын
Raypak heaters reststarting
@jimmabbott2977
Жыл бұрын
If the screen looks off by half a line or garbled, how do you fix that?
@ls1240z
8 жыл бұрын
On your gas line. I didnt see a union. How did you plumb it without a union??
@BKWhite07
Ай бұрын
😅
@ShirleyPessina
2 ай бұрын
I just replaced my Raypac bezel control and I need to know if I have to wait until my pool is running to check to see if it works.
@lukepoolservice
2 ай бұрын
yep... Pool needs to be open and operational to test out the pool heater
@ShirleyPessina
2 ай бұрын
@@lukepoolservice i need to know if the display should be working if the pool is not running. Right now it is black.
@saucyminxmeag
7 жыл бұрын
hi our pool heater is giving a message that says Rollout SW open. And we can't get it to spark. we are new to this type of heater. does it come with a remote at all?
@lukepoolservice
7 жыл бұрын
Meagan Williams call a pool professional to come repair it.
@saucyminxmeag
7 жыл бұрын
we actually figured it out from you tube videos. thanks!
@cranpollock501
3 жыл бұрын
How do you override a low temp lockout on this heater?
@lukepoolservice
3 жыл бұрын
You can’t. It’s a part of the safety circuits to prevent damage to the heater and potentially voiding the warranty.
@SeaBarr00
2 жыл бұрын
You’ll risk the chance of condensation. You don’t want that
@derekbatt63
3 жыл бұрын
My heater is showing that the panel is locked and requires a pin to unlock it and use it manually. How do I unlock it?
@Jeff-kf5qr
9 жыл бұрын
hello, I am getting a "no demand" message on my screen and it keeps saying spark. I hear it trying to spark, but it's not kicking on. have you seen the no demand error?
@williambuckley6128
7 жыл бұрын
Luke I'm getting power but the display isn't lighting up. The previous owner used to have to push several buttons to get it to wake up and display. I can't remember how he did it. Do you have any suggestions?
@traviswilder7703
6 жыл бұрын
William Buckley did you find an answer to your issue? I’m having the same issue.
@Havegreatday238
4 ай бұрын
Same my pool heater will not light up
@michaellee2374
8 жыл бұрын
I am getting a sensor failure message and the unit won't fire up. I have a Raypak R266A heater. Any clues?
@lukepoolservice
8 жыл бұрын
+Michael Lee Best to contact Raypak directly for assistance or find a local pool professional who can handle the issue.
@biker451
8 жыл бұрын
Michael, did you ever find the answer to your problem. I have exactly the same model and am getting the same error and most of the info on the web seems relatively useless.
@BADALICE
7 жыл бұрын
the unit should provide you an error code.
@biker451
7 жыл бұрын
+Bad Alice - The only error code I see is "Sensor Failure" and when I try to find it on the Raypak site I find nothing specific but it looks like it could be the thermocoupler or temperature sensor.
Anyone who calls our office, I can't give advice out over the phone. I recommend finding a local pool professional to help.
@KShags388
Жыл бұрын
I got really lucky and found the female electrical connector to the water pressure switch came off. Once connected it came right on. I learned my lesson, always turn the pump off before opening or closing valves. Thanks for your help anyway.
@KShags388
Жыл бұрын
So this is kind of crazy but I went out and checked it in the heater shut off it was reading 120°. In the back of my mind I couldn’t figure out how the electrical connection blew off. I remembered seeing the wires sitting on top of that Temperature sensor it was pushed up all the way to the top. I noticed as I pushed the temperature sensor down deeper the water temperature began to drop to normal temperatures. I realized what happened was when the pressure built up in the system from closing those valves it pushed the temperature sensor Up and that’s what blew the wire off the water pressure sensor. So there was a few chain of events that happened which caused the heater to not function properly. I got everything back in order and it is functioning as it should.
@robarreaga2225
3 жыл бұрын
Does this unit have an app or timer?
@lukepoolservice
3 жыл бұрын
Raypak doesn’t have an app. Would have to do 3rd party.
@robarreaga2225
3 жыл бұрын
@@lukepoolservice ok thank you!
@Vic-ri6tg
8 жыл бұрын
what does scensor error mean
@lukepoolservice
8 жыл бұрын
+Victoria Shed Tell me exactly what the message says.
@samganley1200
3 жыл бұрын
What should I do if it keeps shutting off and on
@lukepoolservice
3 жыл бұрын
Clean filter
@samganley1200
3 жыл бұрын
Which filter the spa filter or furnace
@samganley1200
3 жыл бұрын
What does water sw mean
@samganley1200
3 жыл бұрын
What does water sw open mean
@rondembkoski1702
2 жыл бұрын
How do you turn "Rem off" to "Rem on" ??
@williamhickerson4316
9 ай бұрын
Did you figure it out? Mine show Rem Off, and it's not heating my spa water.
@rondembkoski1702
9 ай бұрын
I figured it out a year ago, I couldn't wait for these guys to help me. @@williamhickerson4316
@lukepoolservice
9 жыл бұрын
Pool heaters are complex machinery. I can't fix a hvac ac unit or a water heater. With anything Gas related a recommend contacting a professional. Fix it wrong could result in a fire or someone's death.
Пікірлер: 56