HOW SMART CAN A ONE GUY CAN BE THANK YOU DUDE I ALMOST BOUGHT A NEW ONE
@Netuser
5 жыл бұрын
Hahaha np :D
@catherton4
5 жыл бұрын
Glue issue seems to apply to many brands. Consider removing the grips entirely and perhaps abrading or otherwise roughening the exposed surface if that proves to be slippy. No more glue issues.
@xKILLERxCREZx5
5 жыл бұрын
I used a clear non expanding version of "Gorilla Glue" - Can use after 2 hours and fully bonds after 24. Just take off existing glue before, there never come off again!
@Netuser
5 жыл бұрын
I have to try, because my idea is not working permamently. It works for about month.
@xKILLERxCREZx5
5 жыл бұрын
@@Netuser Its great! Just remove current glue, apply the gorilla glue, place on rubber strips and just be sure to have some pressure on it for 2 hours, mine have turned out perfectly, thanks for the inspiration!
@lumikera
5 жыл бұрын
I also used gorilla glue cause it was the only glue in my house, and just be careful to not apply to much. All you have to do is apply it to the lines already on the area. My gorilla glue also bonds instantly on touch, so no wait needed.
@gokublack8373
4 жыл бұрын
keesin do i have to remove the foil?
@balibo07
2 жыл бұрын
@@Netuser yup ıt is not permanant so did it work
@edg6779
3 жыл бұрын
they don't even fix the same problem on their new mice, still weak adhesive used that lasts all of about a month
@chrisconnolly8905
4 жыл бұрын
i just super glued mine back on
@Exx777
3 жыл бұрын
same xd
@Donnirononon
2 жыл бұрын
This is on purpose. I complained to them about it and asked for a Mamba like model without any glued on BS, i happly pay for it. That was like 2015, they still use these rubber pads... And double sided tape does not "work", the rubber is too soft
@mble
3 жыл бұрын
razer.
@nieznoszekiebasy8926
6 жыл бұрын
Gratuluję 500 subów
@Netuser
6 жыл бұрын
Dzięki :D
@DUSKvsDAWN
4 жыл бұрын
what kind of double sided tape is that? sorry im dutch and im trying to find the same one for this exact problem.
@thomaswong6215
2 жыл бұрын
Thanks so much :D I was about to buy a new mouse... saved me $40!!!!!!!!!
@GhostlyChairSniffer
4 жыл бұрын
I had this idea too, but I was second guessing myself
@dayzi3540
4 жыл бұрын
same
@markuskluever4059
4 жыл бұрын
same
@massiefstaal8994
4 жыл бұрын
Wow thanks bruh
@profx2792
4 жыл бұрын
thank you so much bro :)
@iblackgg1872
3 жыл бұрын
THANKS MAN, I LOVE YOU
@Darrentime
2 жыл бұрын
THANKS!
@mikechang8856
2 жыл бұрын
one of my grips started peeling today, i like the mouse but..... this never happned to my logitech
@JovenTheKid
4 жыл бұрын
Bro it kept on coming off but then I saw this vid :O
@AintPopular
4 жыл бұрын
does v2 have same problem
@Netuser
4 жыл бұрын
I have no idea
@carl216
4 жыл бұрын
On the back the black smooth things are on the edges not on the mouse ... what do there
@iwanttodie9737
6 жыл бұрын
lil mankucik poleca łapka w gore =)
@Netuser
6 жыл бұрын
senkju bro
@monkeyman7870
4 жыл бұрын
I used some double sided tape, and guess what. From the heat of my finger it fell off again but turned into a liquidy sticky mess, just fyi, but you probably didnt know that happen as I wouldnt either
@Ferco124
4 жыл бұрын
same for my mamba elite, the whole thing is melted and the rubber is full of sticky glue that cannot come off, never use double sided tape
@tiago.moreira28
5 жыл бұрын
Can I glue it with normal glue? Like Super Glue?
@Netuser
5 жыл бұрын
Sure, why not
@hflavell
5 жыл бұрын
I tried it and it didn’t end up so well
@tiago.moreira28
5 жыл бұрын
@@hflavell what happend to you?
@אנייובל
5 жыл бұрын
use flex tape im sure it will help
@historicalarchives9265
4 жыл бұрын
You can, but these damn grips will keep falling off.
@thepuffguy7
3 жыл бұрын
how should i fix it I put the tape on but it bulges out on the 2 end corners and the top rim but the bottom is fine I don't understand please help
@Knrcs
5 жыл бұрын
why is this on not listed? You helped me a lot thx ^^
@Netuser
5 жыл бұрын
I don't know, I changed it to public. :D np dude
@Knrcs
5 жыл бұрын
@@Netuser Nice ^^
@awesomedudeplayz3950
2 жыл бұрын
Always the razer mouses
@pwrdubz2910
4 жыл бұрын
Thx
@ale5752
3 жыл бұрын
I love you bro
@twelvezip4614
4 жыл бұрын
Can you put a link of where to buy the tape you used?
@Netuser
4 жыл бұрын
Any double sided tape from a random store will work the same.
@DiamondRadar
5 жыл бұрын
is it possible for me to use glue instead
@imterribleatnames7914
4 жыл бұрын
i just fucked mine doing that dont do that
@DiamondRadar
4 жыл бұрын
@@imterribleatnames7914 Glue works, but you need to find the right kind. Don't use something like elmer's glue or a gluestick lol.
@Wiz00445
4 жыл бұрын
@@DiamondRadar which glue did you use? do you think super glue will work?
@DiamondRadar
4 жыл бұрын
@@Wiz00445 probably but don't quote me, im no professional.
@Wiz00445
4 жыл бұрын
@@DiamondRadar tbh I often get pretty sweaty hands so thats probably one of the reasons why the rubber came off and a few days ago I just removed the rubber and remaining glue and I am just using it without anything on the side and its pretty okay I guess.
@balaclava8464
4 жыл бұрын
I just superglued and it stained all the right side of the mouse does someone know what i can do?
@bird718
2 жыл бұрын
when its time to replace my mouse then its razor no more
@Netuser
2 жыл бұрын
Honestly, deathadder V2 and viper ultimate are awesome, I have deathadder V2 for a year and it looks like brand new, and now I'm testing viper ultimate and it's the best mice I ever had
@bird718
2 жыл бұрын
@@Netuser i also really like my razor mouse but... stuff like this happening is not cool. i was thinking of a razor keyboard to go with my mouse and headset but i think i'll try ducky. i'm gonna glue the side back on and see if thats a fix or get a differnt brand mouse.
@lucksterzzlicious1344
4 жыл бұрын
Worst mouse I ever owned.
@jedempleo5833
4 жыл бұрын
For gaming yea, for doing graphic design work, it's amazing because of the light weight.
@Jeremy-su3xy
3 жыл бұрын
So double sided tape is necessary for all razer mouse users.
@bird718
2 жыл бұрын
from the comments, its not a good fix, others have had luck with glue
@garrettfleck242
4 жыл бұрын
Just use super glue
@yaago
3 жыл бұрын
Fucking razer why would they do this
@bird718
2 жыл бұрын
cost savings, my razor mouse started peeling today, never ever never had i had this problem wtih my logitechs.
Пікірлер: 66