My previous video: kzitem.info/news/bejne/l6uHl5muoYCEeaA
@OONeal
4 жыл бұрын
Absolutely great video buddy! Perfect infomation to keep us flying fast! Can’t wait to see the next one!
@MichalOrlowskiRacing
4 жыл бұрын
Thanks buddy!
@melmarks3854
4 жыл бұрын
Nice info mate! I run spec so good maintenance is important! Safety wise and money wise.
@MichalOrlowskiRacing
4 жыл бұрын
Thank You for the support!
@lennartkrischik4757
3 жыл бұрын
Great video, thanks for the information. Altough i always use the gens ace shorty lipos, but i did used a lrp shorty it also word great. Just a bit too expensive for me
@chowettgoes
2 жыл бұрын
Perfect, just the advise I needed 👍
@tommytansley1097
4 жыл бұрын
Hi Michal, great insite into batteries. I never thought about not fully charging batteries for slippy surfaces, I've always been a believer in "more power. It makes sense about not over powering on slippy surfaces. Over here in the UK this might be the "silver bullet", please take this post down now and don't tell to many people 🤐.
@MichalOrlowskiRacing
4 жыл бұрын
It is a very good tuning option sometimes 👍. Don’t share it with anyone...
@rong648
Жыл бұрын
Is it safe to charge a battery as soon as it's discharged?
@hermmie17
4 жыл бұрын
I enjoy your recent videos, always good info. I would appreciate if you would increase your mic volume a bit, in comparision to other videos i have to turn my volume up quite a bit.
@MichalOrlowskiRacing
4 жыл бұрын
Thank You for the advice. I’m very much new to this 😁
@benchtalkrc6895
3 жыл бұрын
Great info
@Duncanlovett
2 жыл бұрын
Hi Michal, What charger do you currently use please?
@Slatanicmushroom
3 жыл бұрын
Great info Michal, thank you! About discharging, you spoke about 20A. What about e.g. discharging at 30A? Does the battery suffer from the higher A? I've heard about people who discharge at ?40A?. And if I'd discharge at only 10A, would that influence the battery in a certain way?
@MichalOrlowskiRacing
3 жыл бұрын
Discharge A does not influence the battery in a bad way. Only charging at high A does harm to the battery in the long run
@Slatanicmushroom
3 жыл бұрын
@@MichalOrlowskiRacing I was thinking that way, but wasn't sure 🙂 Thanks for the reply, have a nice day!
@dirtrider88
11 ай бұрын
i guess this isnt a look after your safety video. literal starts with showing how he carries, and most likely stores, his lipos in a flammable bag. fucking great start.
@olliess.6202
4 жыл бұрын
Hi Michal, thanks for your content. Do you Charge your HV lipos higher than standart 4.2V/cell and If so, is there a reasonable improvement on the track if you have +0.1V/cell more in your lipo? Thanks in advance!
@MichalOrlowskiRacing
4 жыл бұрын
I charge them as high as possible on carpet, so it’s 8,4V in the inspection before the run. Performance wise doesn’t change much, but You get a bit more mAh into the battery.
@gijsk.vandenberg922
4 жыл бұрын
👏👏👏👏
@lukas21614
3 жыл бұрын
Hey! I got the LRP Pulsar Touch charger, is it ok for the battery to be discharged at 20 amps? In my case its a gens ace with 120/60c. Thanks
@lennartkrischik4757
3 жыл бұрын
It is probably possible and many stock racers are doing that, they even have an extra discharger, which can discharge with ludicrous speed. So if you are stock racing, you can try it, just be aware that you battety life will be a little bit less, but you will get more power for a run out of the thing, because there is a better inner Flow with the temperatur they get. If youre modified then i wouldnt do that, wont really make a difference. Just dont discharge it completely, that will destroy the battery. 3.3 is good
@lennartkrischik4757
3 жыл бұрын
But for the battery it ist possible. Gens ace are also very strong and with that rating you shouldnt have problems
@lennartkrischik4757
3 жыл бұрын
10-15 should be enough to get it to temp though
@lynx7575
4 жыл бұрын
It’s not enough select a simple button in any charger, storage feature! Don’t understand all this complicated method you are explaining. storage function is doing more than enough to keep any batteries safe and on top of their potential. Just remember to do quite regularly after a stop period.
@MichalOrlowskiRacing
4 жыл бұрын
Maybe there was a small misunderstanding. Nothing too difficult about this procedure. When You get a new battery, remember to discharge it to 3,3V/cell, before charging it fully. It would be the best for the battery to do it every time, but many times we don’t have enough time at the track to do it. After the race is finished charge it to 3,8-3,9V/cell (storage) and that’s all. 👍
@MichalOrlowskiRacing
4 жыл бұрын
Some chargers might not have storage mode, therefore I wanted to explain what the storage mode does.
@one4all989
4 жыл бұрын
I’ve seen enough lrp batteries go on fire ,destroying entire kits that I would never buy lrp lipos.
@MichalOrlowskiRacing
4 жыл бұрын
I’m sorry You had issues with them. As for myself, I have never seen an LRP lipo go on fire.
Пікірлер: 30