11 years later...and this is still answering questions!
@frozenshade666
Жыл бұрын
It kind of contradict the old drift car idea where more rearward the less gain needed ...
@RoadsideRC
Жыл бұрын
@@frozenshade666 Exactly!!!
@Skydive4ever
12 жыл бұрын
Excellent demonstration, you have a great way of explaining things, thanks for taking the time for this, it was VERY informative :-)
@Shaker1978
5 жыл бұрын
Very very impressive and educational video, thank you!
@000006rapture
12 жыл бұрын
Thanks! I'm about to start using gyros in my FPV setup and this video was very informative.
@ExperimentalAirlines
12 жыл бұрын
That's exactly what started me thinking originally - why the gyro isn't under the main shaft. Heli's make the case quite clearly. Some fixed-wing guys have a more inflexible view of how gyros work and maybe the demo will help.
@FlyingMerf
12 жыл бұрын
Great demonstration!
@welshpete12
11 жыл бұрын
This a great help to me , thank you for posting !
@Danimal-3D
12 жыл бұрын
Great explanation/ clarification!!
@Solutionsonlypls
12 жыл бұрын
Great video buddy and you have made my day. Thanks Alot
@chiliidawg1
12 жыл бұрын
Thanks and keep the video's coming!!!
@AsSoulsDream
12 жыл бұрын
wow that makes a lot of sense, now I can build with that in mind it opens a lot of possibilities,,that very much, I have also build a plane with ur wing making procedure and it is currently in the design stage as of right now..
@MasParaQue
Жыл бұрын
Thanks dude
@DudeWithDogs
12 жыл бұрын
very great, many thanks for this information!
@letmeplaymystrat
12 жыл бұрын
Great information, thanks!
@edendunes
11 жыл бұрын
Great help, thank you!!!!
@opticell
12 жыл бұрын
Great video. I plan to make a flying wing and want to use your foam board. I have heard the wing has camber both top and bottom. If you ever make a video about that, great, I will be working on a 50 to 60 inch wing and could use any help.
@johnnyr19026
12 жыл бұрын
@000006rapture same here. thanks again..
@garybeer9254
Жыл бұрын
So for gyros in helicopters why do the manufacturers who design and build them say the gyros have to be on the centre line?? Also what about showing the gyro mounted to the side of the centre line to show the gyro acceleration side to side and the effect that has on the 2 servos?
@harryn2031
8 жыл бұрын
I wonder if this would apply to gyro/accelerometer units? Accelerometers at the top position will complain because of the linear movement which probably is the reason why dead center COG placement is necessary and advised by the manufacturers. This demonstration will be fine and applicable to the HobbyEagle A3-L for example, but not the A3 which also has accelerometers. Any comments?
@chrisvos81
12 жыл бұрын
usefull test thanks
@aldoyosbel1728397263
10 жыл бұрын
I NEED HELP I BUILD A NEW AIRPLANE AND I HAVE PROBLEM TO FIND THE CG AND I WAS WONDER ME IF AXIS GYRO SYSTEM STABILIZER WILL HELP ME IN CASE THAT I HAVE WRONG CG
@RCcunuk
12 жыл бұрын
excellent video. I have a question. You seem to have the gyros placed midline of the movement. Does it matter if they are farther away from the movement midline or does it act the same Thanks
@wernerpretorius5354
6 жыл бұрын
I just got my first gyro system, so to clarify: I can mount the gyro anywhere on the aircraft as on as it is in the same axis as of movement(Direction plane is flying), for example, the nose, tail, middle of the aircraft, CG position. Please correct me if I'm wrong.
@roynnash178
3 жыл бұрын
What is ESky's web address? Great video. Just what I was looking for.
@Aw4yed
3 жыл бұрын
Ok but what about the accelerometer that are way more commons todays?
@66francis
5 жыл бұрын
Does this apply to all brands of gyro? Or just to the brand you tested...
@alexboon9438
8 жыл бұрын
how to install in rc car v2
@theailer
12 жыл бұрын
If you ever built a heli you would already know the above to be 100% true ;)
Пікірлер: 32