This is the best gluing video that I have ever seen. Great job sir! Thank you, I learned a lot
@HearnsHobbiesMelbourne
Жыл бұрын
Glad you did! Thank you for watching!
@zenon-paulking3399
3 жыл бұрын
Thank you, I had ordered a gluing jig and wondered how to use it. Question answered.
@HearnsHobbiesMelbourne
3 жыл бұрын
Glad you found the video helpful.
@arrenlambert1486
2 жыл бұрын
I find letting the glue set without using activators, and letting it set on its own like you have makes the bond last longer and seems stronger. From my findings and the glue I use that is, other brands may be different
@HearnsHobbiesMelbourne
2 жыл бұрын
Yes, allowing CA glue to set naturally will give a stronger bond but sometimes there just isn't enough time, especially when you are at the track. A blast of CA Accelerator will help speed up the curing time and give a decent bond if you need to use them in a hurry.
@tedsimington7654
Жыл бұрын
Thanks for sharing sir👍
@HearnsHobbiesMelbourne
Жыл бұрын
It has been a pleasure. Thanks you for watching.
@FlyingBuzzard
5 жыл бұрын
👍 Thumbs Up
@johnbravo7542
Жыл бұрын
Is that glue good for Buggy and truggy tires?
@HearnsHobbiesMelbourne
Жыл бұрын
This is the glue we recommend for all tyres now: www.hearnshobbies.com/products/yokomo-super-quick-glue-plastic-bottle-y-cs-sgex
@human890209yang
2 жыл бұрын
This video seems to skip the other side's work. Do you glue the other side of the tyre after the 1st side's glue completely dry?
@HearnsHobbiesMelbourne
2 жыл бұрын
Correct, you repeat the same process once dry otherwise it is going to get glue on the table.
@human890209yang
2 жыл бұрын
@@HearnsHobbiesMelbourne Thanks.
@kori7672
5 жыл бұрын
Oh and does your shop have drift cars?
@HearnsHobbiesMelbourne
5 жыл бұрын
Hello, yes we do have. We sell Yokomo drift cars.
@kori7672
5 жыл бұрын
Thank you I’ll try my best to get one 👍
@MannyGunzz
3 жыл бұрын
Is lock tite super glue ok it says for rubber and plastic
@HearnsHobbiesMelbourne
3 жыл бұрын
There are many kinds of Loctite brand superglue. Any good quality thin to medium thickness superglue (CA) will do.
@WESTVIRGINIAOUTSIDER
3 жыл бұрын
Where to buy tire gluing jig and where can I find parts for a Tamiya FF-03 fwd car
@HearnsHobbiesMelbourne
3 жыл бұрын
Sorry, we don't have the jigs anymore. Try searching the web for 1/10 tire gluing jig. The same advice goes for FF-03 parts.
@WESTVIRGINIAOUTSIDER
3 жыл бұрын
Thank you
@marcrichard7741
2 жыл бұрын
where do you get the inserts? brand?
@HearnsHobbiesMelbourne
2 жыл бұрын
Most tires do come with inserts now days. This said Sweep does sell insert separate. Looking at off road all major manufactures also sell inserts.
@kori7672
5 жыл бұрын
I think soon I’ll buy a rc from here
@HearnsHobbiesMelbourne
5 жыл бұрын
Thank you, hope to see you soon!
@bobbymalta73
3 жыл бұрын
From were can we buy the tyre items Please?
@HearnsHobbiesMelbourne
3 жыл бұрын
We have the glue, tyres and wheels in stock but the tyre gluing jig needs to be found on the internet.
@bobbymalta73
3 жыл бұрын
@@HearnsHobbiesMelbourne ok thks for your reply.
@jensenn92
3 жыл бұрын
how to remove the tyre from rims? for touring car
@HearnsHobbiesMelbourne
3 жыл бұрын
Do you want to remove the tyre to reuse the rims? If the rims are nylon you can dip them in an acetone bath to remove the superglue. Anything other than nylon will melt in the acetone. If not then you will have to cut the tyres off. Usually the wheel and tyre combo is discarded after the tyres are worn as the wheels will have some damage.
@jensenn92
3 жыл бұрын
@@HearnsHobbiesMelbourne oh i see. because i saw some shops selling the tyre without rims
@HearnsHobbiesMelbourne
3 жыл бұрын
That is probably not as common today however the idea is to be able to mix different tires and inserts as well for set up puroposes👌
@zenon-paulking3399
3 жыл бұрын
I am interested in trying Evostick to make the tyre removal and refit easier. Will post my conclusion.
Пікірлер: 36