I believe you are giving it a type of a jump start effect with the stronger charger. awesome dude
@itsmoneyoverbitches
2 жыл бұрын
The new brights with the big 9.6 battery’s I noticed the car was like stuttering and when put the little 9.6 lithium ion battery they work way better and I did the same with putting the 12v battery in the cars that take 9v and yes they definitely work way better
@RichTexas82513
4 жыл бұрын
I have a new bright rc that charges and works but when it goes off the chargerbit doesn't work at all? Is there anyway to fix?
@samwashington2019
Жыл бұрын
Nice it worked for me
@martinwhitehurst9893
6 жыл бұрын
Ok thank you
@yemarican
6 жыл бұрын
thank you for sharing this with us.
@UncleGus
6 жыл бұрын
Thanks for watching!
@yeseniaabarca1810
3 жыл бұрын
I got a question how do I charge a fastlane RC 9.6v rechargeable ni-mh battery pack
@mrnoobkingyt7686
2 жыл бұрын
How long can you charge the new bright 6.4 v
@dattapriya4923
3 жыл бұрын
I need one charger same like what is their in our video where can I get it in vizag please say!
@taleadillard5302
4 жыл бұрын
Were did you get the new charger
@cottonfiber6480
3 жыл бұрын
I wonder if the 9.6v charger will charge a 12.8 battery?
@chameeralashan5170
4 жыл бұрын
i have 4.8V battery pack with rock crawler.i had to charge it by mobile phone charger.how to know the fully charging time for it gone??
@chapoxv9477
4 жыл бұрын
Well he Answerd my question
@hectorman7926
3 жыл бұрын
no
@lutherhite7921
7 жыл бұрын
i have two 1/15 scale new brights that hhas the internal battery which is a 2 cell 6.4 volt . it charges with a usb port. when i plug it in theres a red light on the bottom of the vehicle that light red when charging , when its done it goes out . but now when i plug it in the light blinks red would you know the problem?
@UncleGus
7 жыл бұрын
Luther Hite sorry I don't have one with internal battery and can't think of a way to fix. Did you contact new bright? newbright.com/contact/
@billyeason9899
6 жыл бұрын
They're fixed lithium cells soldered to the receiver board, take them out and run a 7.4v 400mah 2s lipo, this will require soldering...
@sh1nd084
3 жыл бұрын
Thx
@henrontv4558
3 жыл бұрын
Does the light on the new bright turn off when it’s fully charged??
@UncleGus
2 жыл бұрын
Yes
@Truck_person
2 жыл бұрын
@@UncleGus the light on my 12v new bright charger isn't even turning on, pop it in a new bright truck.. Nothing
@Staryuuki_Fan
2 жыл бұрын
That charger is a 7.2 V charger you need at least 9.6 to fully charge it and I have that thank you if I did not know to call new bright they offered a replacement battery and charger free of charge I really have to thank you I called new bright offered me in replacement battery and charger free of charge !!
@martinwhitehurst9893
6 жыл бұрын
Is there a way I could tell how much voltage it can handle on the board somewhere
@UncleGus
6 жыл бұрын
Sorry I don't know.
@martinwhitehurst9893
6 жыл бұрын
Ok
@patacones7948
3 жыл бұрын
Hi one of my RC cars just stops randomly and I have to switch it off and the on but it keeps happening the RC is a terra climber sorry I and posting this 6 years later but I really need your help please respond!!!
@yahtzee3382
7 жыл бұрын
smart chargers don't charge batteries below a certain voltage cuz they don't want them 2explodde
@UncleGus
7 жыл бұрын
Thanks for the info and thanks for watching!
@Dylan-kw8wu
6 жыл бұрын
explode
@johnwestberry4446
6 жыл бұрын
Some do. It's called a soft start
@martinwhitehurst9893
6 жыл бұрын
how can i use a 7.2v battery pack in place of a 4.8v battery pack for a rc excavator?
@UncleGus
6 жыл бұрын
its too much voltage. Just get a new pack and cut the wires to replace the connector with yours. Many batteries on ebay www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313.TR3.TRC2.A0.H0.X4.8v+battery+pack.TRS0&_nkw=4.8v+battery+pack&_sacat=0
@cichavlogs834
6 жыл бұрын
Will the 12.8v go into a 9.6v rc
@UncleGus
6 жыл бұрын
Cicha Vlogs yes on the green new bright batteries but it has a notch at the top that needs to be filled down to fit. Then you will risk the motor overheating.
@alipoor7659
5 ай бұрын
Hi I have a my toys rc car battery but the battery charging plug is loose and won’t charge how should I fix it or change it
@UncleGus
4 ай бұрын
If it's the new USB charging type it's probably worn out connection plug.
@bannuk669
5 жыл бұрын
Hello sir i have 1000mah and 8.4v battery. But i don't have charger. So you will Please prepare a Video on this. My content. Sir
@pranavkallem9823
6 жыл бұрын
I have a new bright 9.6v battery and lost the adapter. HELP!
@UncleGus
6 жыл бұрын
Try to buy used one off ebay.
@kev6648
6 жыл бұрын
hi i just bought a 4.8v 700mAh Nicd rechargeable battery but i intend to use only maybe 2 to 3 months later can i just leave it as it is then only charge it after 2 to 3 month later. will the battery spoilt? And can i used a handphone usb charger to charge example samsung charger ? thanks
@UncleGus
6 жыл бұрын
NiCd batteries don't spoil if completely drained only LiPo batteries spoil. I would not charge it with phone charger because the phone charger will not stop when the battery is full and it might explode.
@kev6648
6 жыл бұрын
thank you
@Boymarceleno970
3 жыл бұрын
I have the opposite situation I have the 12.9v doing the same thing
@HightLink
5 жыл бұрын
Hey I got a RC truck and when I try to charge the battery tru a small usb adaptor, it lights a red light, than it turns off and nothing happens anymore.. any idea?
@bigmac6303
5 жыл бұрын
U shorted ur outlet or battery
@bigmac6303
5 жыл бұрын
Same thing is happening to me
@bigmac6303
5 жыл бұрын
If a popping sound was there u shorted something
@HightLink
5 жыл бұрын
@@bigmac6303 the idea is that it's charging.. just not showing it.. that's akward
@bigmac6303
5 жыл бұрын
@@HightLink if the light popped that means it overcharged enough to break the LED
@pizzaface4079
4 жыл бұрын
I have a tyco tantrum, I bought an original tyco battery off of Ebay and charged it and it's still dead. I even charged it overnight and still the same, how do I revive it.
@UncleGus
4 жыл бұрын
If it fits in a new bright 9.6v charger or a Tyco terrain twister charger it may jump start the charging for 5 minutes then charge in tantrum charger for the rest of time but be warned it may explode when charging in higher voltage charger.
@pizzaface4079
4 жыл бұрын
@@UncleGus I did that now my 9.6 got fried and it won't change the battery. Idk I'm gonna have to get a new one.
@different7775
2 жыл бұрын
Hey I have a 6.4 and I don't know how to take it ourlt of the charger
@joshjlmgproductions3313
6 жыл бұрын
I had a Scorpion that quit working just under 1 month. I contacted NB about it, and they did nothing. 😐
@UncleGus
6 жыл бұрын
sorry to hear! I had defective new bright truck and they wanted me to mail it to them at my cost so instead i just bought a new one at walmart and returned the defective one to walmart for full refund.
@joshjlmgproductions3313
6 жыл бұрын
Uncle Gus I got it as a Christmas present a few years ago from my Dad, but since he bought it before Christmas, and it stopped working at the end of January, it was technically over the 1 month warranty, so nobody did anything, and we just ended up getting rid of it. (Nobody as in New Bright, or Walmart)
@daisychavez822
7 жыл бұрын
Where can I get those green batteries??
@UncleGus
7 жыл бұрын
Daisy ChaveZ try to contact new bright for warranty replacement otherwise search on eBay.
@rukmanpuri9787
6 жыл бұрын
If we take out the green chip of lithium lion battery then do it work
@UncleGus
6 жыл бұрын
RUKMAN PURI what green chip?
@rukmanpuri9787
6 жыл бұрын
In some remote control car lithium lion battery is used and that battery contains a green chio attached in it
@kennetgomez6284
4 жыл бұрын
4100 edgewood f 89
@user-oe4tn9vt3o
6 жыл бұрын
Cell charger ko buy kese kare
@kennetgomez6284
4 жыл бұрын
can you give me a new bright please
@davidsavelyev5579
7 жыл бұрын
charger
@helenbradley2181
4 жыл бұрын
I got a new bright and my charger and battery stop working
@arkiellemacayanan1634
5 жыл бұрын
how long should i charge the 6v battery for my rc car?? pls answer
@heroicuser8520
4 жыл бұрын
arkielle macayanan once the batter is on fire it should be fully charged.
@chocolatestarfish6297
4 жыл бұрын
@@heroicuser8520 that's only 99% it only reaches 100% after you throw water on it to put it out whilst still plugged in.
@UncleGus
4 жыл бұрын
if the charger doesn't have a charge light on it maybe only 6 hours is good enough.
@sped_wheeliesvarney4870
7 жыл бұрын
Mine terns red and buzzes
@UncleGus
6 жыл бұрын
if the new bright charger is buzzing I think its defective. you should call their customer service.
@kennetgomez6284
4 жыл бұрын
Porfa
@kennetgomez6284
4 жыл бұрын
I want some
@user-oe4tn9vt3o
6 жыл бұрын
Please reply early
@Raunak420
6 жыл бұрын
TV remote mobile ka battery Kaise thik karte hai
@UncleGus
6 жыл бұрын
What?
@dalynpearson7223
5 жыл бұрын
I shaved a lot of the 9.6v nipple off to fit into the 12.8v lithium ion battery pack charger . When I put the 9.6v lithium ion battery pack into to 12.8v lithium ion battery pack charger it blinked red. Is it supposed to do that?
@UncleGus
5 жыл бұрын
yes it blinks red while its charging then should go green when its charged.
@dalynpearson7223
5 жыл бұрын
It also made this sound like a timer but when I put my 12.8v lithium ion battery pack into the 12.8v lithium ion battery pack charger to charge my grave digger it doesn't do that
@dalynpearson7223
5 жыл бұрын
When I charge my 1/8 scale grave digger it doesn't blink red it's solid red and when it's done it blinks green and it doesn't sound like a timer
@UncleGus
5 жыл бұрын
maybe your 9.6v pack is no good anymore. Does it charge at all in the 9.6 charger?
@dalynpearson7223
5 жыл бұрын
I've had the 9.6v lithium ion battery pack for 3 years and I don't have a 9.6v lithium ion battery pack charger
@davidsavelyev5579
7 жыл бұрын
where can you buy tonka xd
@UncleGus
7 жыл бұрын
david savelyev you can't but any 9.6v charger with tamiya connector can charge it
@davidsavelyev5579
7 жыл бұрын
ok
@davidsavelyev5579
7 жыл бұрын
thanks
@martinwhitehurst9893
6 жыл бұрын
Get a new battery pack? Cut the wires for what? The connector is right I just think the 4.8 ain’t enough power
@UncleGus
6 жыл бұрын
Maybe the orginal 4.8v pack is old and weak? if you get a new one it may run better? You can't run a LiPo because it doesn't have a low voltage cut off. You have to run NiMh you could try 6v NiMh but may fry the board or motor.
Пікірлер: 104