Most beautiful plane ever! Incredibly realistic, bro. Stunning.
@RCPLANEVIDEOS
5 жыл бұрын
many thanks!
@michaelslater4841
4 жыл бұрын
Very very nice thank you for sharing
@RCPLANEVIDEOS
4 жыл бұрын
many thanks 👍
@marinjeam
7 жыл бұрын
Great tutorial !!
@RCPLANEVIDEOS
7 жыл бұрын
no problem ;-) thank you
@tangotango168
6 жыл бұрын
Einfach super Arbeit Respect Respect
@RCPLANEVIDEOS
6 жыл бұрын
Danke !!!
@f76gg
7 жыл бұрын
Big like
@RCPLANEVIDEOS
7 жыл бұрын
thanks !!!
@fishsquishguy1833
6 жыл бұрын
Beautiful job! It's hard to lay that paint and clear down, wet enough so it flows, but no runs. You could refinish a car if you wanted too? Your panel lines and rivet detailing is excellent as well! Did you have to do any wet sanding and buffing to the clear coat afterwards? It looked super slick in the vid, just curious. Thanks, Jim
@RCPLANEVIDEOS
6 жыл бұрын
no, all steps are shown on the video. No sanding in front of the clearcoat. many thanks!
@prep0wer
7 жыл бұрын
Must see.
@prep0wer
7 жыл бұрын
Übrigens, hat jemand eine RC I-153 oder PZL P-7
@RCPLANEVIDEOS
7 жыл бұрын
leider nein, nicht das ich wüsste ...
@ripper9111
5 жыл бұрын
Excellent job. I really like the riveting. Is that a bit you can buy or did you make it yourself on the grinder. Thanks.
@RCPLANEVIDEOS
5 жыл бұрын
thanks, you have to saw off the drill yourself crooked ...
@0304051324
6 жыл бұрын
rc tutorial, step 1: get a paint shop :D
@bellboybob
7 жыл бұрын
Markus: Great result with the gloss white undercoat before applying the Mipa Vicrom. Which do you like better for the chrome undercoat? Gloss black or gloss white? Thanks, Bob
@RCPLANEVIDEOS
7 жыл бұрын
Hello Bob and thank you! I think, with the white the chrome becomes brighter. In our photo album is a picture with white and black chrome. The first picture in April 2017 (DH100 Vampire = white, Spitfire = black) cloud.1und1.de/ngcloud/external?shareId=rsRA-wgHRCWbQU7r0a4pZg16206#/Flugplatz%20Bilder%202017
@dentidens7834
7 жыл бұрын
sehr gute Arbeit - leider fehlt mir für sowas die Lackierkabine. Meine Nieten mache ich immer mit einem in einen Lötkolben eingespannten Messingröhrchen. Das Ergebnis ist fast das gleiche.
@RCPLANEVIDEOS
7 жыл бұрын
Hallo und vielen Dank, also die Kabine gehört uns auch nicht, aber wir dürfen die benutzen von der Firma wenn wir mal was haben zum lackieren. Das mit dem Lötkolben hatten wir auch schon gemacht, geht genauso. Man muss halt aufpassen das er nicht zu heiß ist weil dann "verbrennt" der Füller gleich bzw. das "innere" von der Niete fällt raus. Wobei hier mit dem Dremel musst genauso aufpassen das man nicht zu tief rein kommt und durch sticht ;-)
@yellowhammer4747
6 жыл бұрын
LOOKS DOPE! THE REAL AIRCRAFT WAS OUT OF ALUMINUM. THE MOSQUITO WAS MADE OUT OF WOOD. EXCELLENT ATTENTION TO DETAIL!
@paulschwartz9122
7 жыл бұрын
Well done..Too bad this paint isn't available in US..
@RCPLANEVIDEOS
7 жыл бұрын
you can order via Ebay USA (search "mipa vicrom"), comes from Germany ;-) that is, a friend from the USA has ordered it
@istvanpinter3177
3 жыл бұрын
Warum hast du diese große Oberfläche statt Breitstrahl mit Rundstrahl lackiert? Mit Breitstrahl kann man die Farbe, und Klarlack gleichmäßiger aufspritzen, und das besonders wichtig bei der Metalllackierung. Beim Endergebnis sind die Lackierungsstreifen gut sichtbar, sonst gute Arbeit.
@RCPLANEVIDEOS
3 жыл бұрын
Hallo, also ich fand das Ergebnis war spitze und hatte eine saubere glatte Oberfläche. Lackierstreifen wüsste ich keine das mein Jet welche hatte, seh auch auf Bildern nix. Und einen Jet gibt's noch, der sieht absolut sauber und "Streifenfrei" aus. Auch schon wieder 3 Jahre her, wie die Zeit vergeht 😔
@dingo5827
6 жыл бұрын
The real aircraft was made from wood , which means NO RIVETS
@RCPLANEVIDEOS
6 жыл бұрын
yes, we know ... made of wood / metal ;-)
@isi3297
4 жыл бұрын
What s the paint used?
@RCPLANEVIDEOS
4 жыл бұрын
sorry, I do not understand the question 🤔
@The_fappening
3 жыл бұрын
@@RCPLANEVIDEOS brand paint
@RifullOfTheWest
5 жыл бұрын
This thing is just way way too small for my taste. Its like flying a bug with a motor.
@RCPLANEVIDEOS
5 жыл бұрын
you do not have to buy it. We not understand the comment now?!?
Пікірлер: 36