Thanks! I wish i would have watched this first my 124017 rear diff stripped on first run. I got a replacement diff and greased front and rear.
@alexaguilar1668
2 жыл бұрын
The bumpers are advertised backwards online,too. Flip them around and it will look way better
@MrYansonMRY
2 жыл бұрын
Yes and it did advertised as backwards too. I prefer to install it that way as it has wider stance and protection
@gamingvibes4u
2 жыл бұрын
KZitem recommene this video 🥰 yay my local review nice job bro👍 minat dgn model ni,tapi model x cukup 😹
@gamingvibes4u
2 жыл бұрын
Sblm ni 144001 tpi dh rosak bedal Banting x Banting lol 😹
@MrYansonMRY
2 жыл бұрын
No problem. You'll get one soon🙏
@gamingvibes4u
2 жыл бұрын
@@MrYansonMRY great news!!! sdh oder tdi pagi bro tunggu smpi he,x sabar nk buat content rc balik🥰
@gamingvibes4u
2 жыл бұрын
@@MrYansonMRY version 2
@MrYansonMRY
2 жыл бұрын
Nice👍👍👍 Congratulations bro
@LassoKid7777
5 ай бұрын
The first upgrade should be grease the diffs and get thicker dog bones as they bend quite easily
@MrYansonMRY
5 ай бұрын
You're right 👍🏼
@urbexandmystery
Жыл бұрын
nice video bro! this car arribe to me on 2 days!
@MrYansonMRY
Жыл бұрын
Thanks for watching! Great to hear yours will be arriving soon😍 Enjoy your 124017👍🏼👍🏼👍🏼
@dannywalker6279
Жыл бұрын
Nice video, been wanting one of these for awhile, finally broke down and just ordered one gonna order bumper set also, prolly go with white lithium grease in diffs , so how is this car holding up any other mods you have to do? I heard the front hubs were a weak point, thanks again
@MrYansonMRY
Жыл бұрын
Thanks for commenting! So far so good. Mine has been fine as long as I don't crash badly on any hard surface. The front hubs are just fine...for now. Upgrading to aluminium might be a good investment as it strengthens the front sections and might improve the steering response. Cheers mate! Hope you're having fun with yours👍🏼
@dwaynearthur2804
Жыл бұрын
Order some new cvd's , that's the weakest part of the car. I bend or twist one every time I run mine they're flimsy
@dwaynearthur2804
Жыл бұрын
Order some new cvd's , that's the weakest part of the car. I bend or twist one every time I run mine they're flimsy
@MrYansonMRY
Жыл бұрын
I surely agree on that point. They seem a bit thinner than I expected. And yes, I do have spares of them...just in case..
@Bootvirus1
2 жыл бұрын
Hi, great video! Could you please add a link where you ordered the bumpers please? Thank you and best regards from Germany, Tobi
@MrYansonMRY
2 жыл бұрын
Thank you sir! Sure, I'll link up on the description soon
@TomasSchertel
2 жыл бұрын
@@MrYansonMRY Please add links to everything 😂
@HansoloToker
2 жыл бұрын
@@MrYansonMRY lol
@gilfadilana5058
Жыл бұрын
Is changing the transmitter & receiver with dumborc solve the delay issue with the stock transmitter?
@MrYansonMRY
Жыл бұрын
It solved a little bit only.
@jured7383
6 ай бұрын
Thanks for all videos you do. I am a rookie in RC, just bought a couple of MJX 14210 to race my family in the backyard and WLT 124017 is on the way BUT I was somewhat impatient and ordered two Lipos S3 3300 mAh in ahead but now they don't fit to MJXes. Can anyone measure if it will fit for WLT 124017 ? Battery is 13,5 cm long, 4,3 cm wide and 2 cm high.
@MrYansonMRY
6 ай бұрын
Hello. It can't be fitted, sorry. The maximum size is 2200mah
@jured7383
6 ай бұрын
@@MrYansonMRY Thanks for reply. The car came in the meantime. Max battery fit in is 95x34x30 mm.
@polarbearjf
2 жыл бұрын
Hi, I have a similar 124016 and was wondering where the ESC calibration button is as I need to calibrate the throttle on the new Receiver/Transmitter. Thanks Heaps!
@MrYansonMRY
2 жыл бұрын
Is your ESC stock Wltoys?
@polarbearjf
2 жыл бұрын
@@MrYansonMRY Yeh it's the stock esc
@MrYansonMRY
2 жыл бұрын
In my opinion, the reset or calibration button is on the receiver. Just reset the binding procedure with hope that it would reset the throttle
@danieldaniels4168
2 жыл бұрын
Are you happy with the mods you have done or do you changed something? I think about which diff silicon i will use or maybe just normal grease. You used the 1000w are you happy with this decision? Greetings from Germany ✌️
@MrYansonMRY
2 жыл бұрын
For its size, I'm more than happy for mods I've done.👍 As for the grease, it'd be fine if using normal grease. I just used 1000W as I want full traction for its size. And I'm very happy with my decision as the hard silicone will slowly smoothen as time goes by.
@danieldaniels4168
2 жыл бұрын
@@MrYansonMRY what is the maximum lipo size can you measure it for me? My 124017 V2 is on the way and i want to order some 2S and 3s lipos for it.
@MrYansonMRY
2 жыл бұрын
2200mah 3S is the maximum lipo size so far. Of course you could use a bigger battery but you need to uninstall the side plastic
@dwaynearthur2804
Жыл бұрын
I use mobil one full synthetic grease in mine , works great. The car really looks good but too fast for it's size . I never thought I'd say I had a RC car that was too fast but this one is
@garygallant5390
Жыл бұрын
Rc cars at this size is more ideal on paved roads or hard packed tracks. The buggy literally disappears amongst the weeds. Great video. I love the bumper.
@Eng586
2 жыл бұрын
Would bike grease work? I was thinking about using Park Tool grease for the diffs.
@MrYansonMRY
2 жыл бұрын
Should be fine, I guess. As long as it has lubricant properties
@Eng586
2 жыл бұрын
@@MrYansonMRY Alright thanks
@marklegassick7125
10 ай бұрын
Hi, great video with some useful tips. I ordered the bumper for my new124017 to provide protection for the front and rear suspension which I think will be really vulnerable to impact. But I have a problem with fitting the rear bumper because the holes for the screws on the plastic insert of the bumper don't line up with the holes on the chassis. Is there a solution for this?
@MrYansonMRY
10 ай бұрын
As for me, I just screwed the top and left the bottom insert without screws. So far, it still holds up perfectly fine 🙂
@MrYansonMRY
10 ай бұрын
Or you might want to drill new holes which align with the stock holes on the chassis
@marklegassick7125
10 ай бұрын
@@MrYansonMRY When you say top, do you mean the front bumper and by bottom do you mean the rear bumper? When the rear bumper is pushed in it does feel quite secure so I might have to try and run it like this. Not really ideal though 😥
@TheArtofBoxing101
Жыл бұрын
Just got the buggy today, the front left wheels toe is facing so much the the left the car essentially just goes str8 left. Can't believe the quality control. Now everytime I try to adjust the toe with the 1.5 hex the links just pops the entire thing off. It won't turn at all like it's glued. What do I do?
@MrYansonMRY
Жыл бұрын
I see. It's ok to pop the entire link off first. Then, try to get extra tools to hold on the link securely to turn the 1.5hex according to your needs. Don't give up 👍🏼
@TheArtofBoxing101
Жыл бұрын
@@MrYansonMRY Yeah I ended up taking them off and putting them on a plastic molded vice and spinning them loose. I STILL no matter what I do just can't get the cars to the correct zero toe on BOTH sides. Like I can do one but not the other and the car will always track one side or another and never go straight. I also added the X6 Gyro to it and maxed it out to help but it barely does in this case it will always pivot to on side. I have the parts to make it hit 70 but in this rate it's just a suicide crash. Even messed with the servo hex adjustment that just confuses me more.
@MrYansonMRY
Жыл бұрын
Very sad to hear your frustrations just to make it right. However, it seems you want to make it for high speed purposes. Toe in setup is helpful for this. If the plastic links are loose, you might want to try out with metal links. They're adjustable without worrying about stripping the plastic links. Take it easy. Breathe in breathe out. You can do it brother 💪💪💪
@victornovaesp
2 жыл бұрын
Hi , great video. Can you post the links of all items upgrades, please?
@MrYansonMRY
2 жыл бұрын
Hi. Thanks for watching. Sure will do
@handymulyo7885
Жыл бұрын
Great RC except the quality control. My son's wltoys kept on losing the lug nuts after few runs, what should I do?
@MrYansonMRY
Жыл бұрын
Hi! Thanks for asking me that question. There are 2 ways to mitigate this issue. 1. Use loctite 2. Use some heat to the nuts to melt the plastic in the nut for a few seconds. Should be fine after that.
@168grhp
Жыл бұрын
Vibratite works well and you don't have to keep applying it.
@salvatorealessandrino945
Жыл бұрын
Hallo Did you no problems to synchroniseren the esc wuth the radio thank you
@MrYansonMRY
Жыл бұрын
Hi. So far no problem. Furthermore, I'm using DumboRC Tx Rx
@unlazinessboyo
2 жыл бұрын
Hi, can you maje aluminium upgrade and improve it, many say aluminum upgrade making it worst
@MrYansonMRY
2 жыл бұрын
Well, I preferably stay on plastic parts as they are less prone to break if there's impact. Meanwhile, aluminium parts will surely bend and stay bent whenever strong impact is applied. However, I appreciate your suggestion to upgrade aluminium parts. I'll consider maybe a few parts worth to upgrade ☺️
@salvatorealessandrino945
Жыл бұрын
Hallo do you have some video to synchronise the esc with the radio greetings
@MrYansonMRY
Жыл бұрын
Hello. Sorry, I don't have
@bradcitoo
11 ай бұрын
Can you make a video on how to disassemble the differential step by step to be able to grease the one in my car. please
@MrYansonMRY
11 ай бұрын
Perhaps I can because I bought another kit of 124019 👍🏼
@alexaguilar1668
2 жыл бұрын
You installed the bumpers backwards
@MrYansonMRY
2 жыл бұрын
Haha. It's ok. Either way, it still provides a bit of protection against forward and backward impacts 😉
@vladkazmin9398
2 жыл бұрын
Hi, nice video, can u add the link an oil and lube there you bying it?
@MrYansonMRY
2 жыл бұрын
Hi. Sure, I'll soon👍
@remibergeron2347
2 жыл бұрын
Mes cvd ont tordu un peu est-ce normal? J’ai même pas abusé!
@MrYansonMRY
2 жыл бұрын
C'est normal. Le métal CVD est assez fin. vous voudrez peut-être le jouer sur un terrain meuble.
@triplesick2111
2 жыл бұрын
U using stock battery?
@MrYansonMRY
2 жыл бұрын
Yes. 2s 2200mah 25c
@ollypboy
2 жыл бұрын
Oiling the outside of a sealed bearing!?!?
@MrYansonMRY
2 жыл бұрын
My mistake but eventually I actually wipe the excessive oil before put it back FYI
@Rooonga
2 жыл бұрын
Aren’t these sealed bearing units?
@MrYansonMRY
2 жыл бұрын
Not really
@Broxty
Жыл бұрын
@@MrYansonMRY Yes they are...lol
@NavdeepSingh-bt2cc
Жыл бұрын
link to the bumper please
@MrYansonMRY
Жыл бұрын
Here you go shopee.com.my/product/602971418/10975439416?smtt=0.6768520-1660012069.9
@michaelmski5421
2 жыл бұрын
Is anybody injecting the Diff Lube rather than dismantling the whole car?
@MrYansonMRY
2 жыл бұрын
I wish there were easier ways to lube the diff without dismantling the car but I'm afraid that's not the case.
@michaelmski5421
2 жыл бұрын
@@MrYansonMRY Sounds like nobody has tried. Seems like an appropriate hole could be drilled through the casing Where there is no interference, lube could be injected with a syringe and a self tapping screw inserted to close the hole. IMHO as a retired Engineer.
@MrYansonMRY
2 жыл бұрын
Actually that's a brilliant design, to be honest. Really will ease us to lube the diffs
@salvatorealessandrino945
Жыл бұрын
Hallo yes is hecgoing on 3s thank you
@MrYansonMRY
Жыл бұрын
Hi. Yes. Tested with 3s and still can handle it
@sdriver6153
2 жыл бұрын
What is the song that starts at 5:02?
@sdriver6153
2 жыл бұрын
I recently ordered one of these and I'm stoked to get it, should be here Thursday. Is there a 3s that you would recommend?
@MrYansonMRY
2 жыл бұрын
Not sure. I've got it from KZitem, Nocopyrightsounds Channel
@MrYansonMRY
2 жыл бұрын
3s is almost uncontrollable personally unless you have a huge compound to play it, shouldn't be a problem
@Noname-wx3ru
2 жыл бұрын
bro are you malaysian 🤨
@MrYansonMRY
2 жыл бұрын
Yes, I am☺️
@eddyzul6311
Жыл бұрын
my cars
@anza77
Жыл бұрын
Lube in water proof bearings...🤔🤔🤔
@MrYansonMRY
Жыл бұрын
Works for me. Would you mind to explain your opinions?
@anza77
Жыл бұрын
@@MrYansonMRY if it's properly sealed bearing... Lubricant isn't getting inside..
@anza77
10 ай бұрын
@@MrYansonMRY If it's water proof.... it most likely is lubricant proof also
Пікірлер: 93