They really are nothing compares at this price point.
@LePerrit
2 жыл бұрын
Thank you for your sharing this, In your opinion which one wins in sound quality etc, number one winner, then second and third position?
@CharliGTImk4
2 жыл бұрын
Do you still have the rcf 912 A? Did you fix the home sound issue in bass response? I would like to buy this speaker but I wonder if I should go to 910 version. Me too I like kick bass but I got tired of it soon.
@LePerrit
Жыл бұрын
@@CharliGTImk4 Yes the problem was the acoustics in my house no the speakers. The speakers are great
@sweettreeproductions2149
Жыл бұрын
935 best then 735 mk2
@LePerrit
2 жыл бұрын
Hey buddy, I just got the RCf 912 A, they sound great, I use to have the qsc k12.2 I notice the 912 have more kick bass than the qsc. Thats a good thing for mobile dj events but when I use them home its too much bass even in the linear setting. I have to eq the bass. Any tips in what to do about this?
@sweettreeproductions2149
Жыл бұрын
You are on the right track. Since these have the BMC feature that allows them to go so much lower. If you are using them at home you might want to put a crossover point with a butterworth 24 at 40 or 50 hz to keep it from being too much low end.
@djnamsydsyd
Жыл бұрын
Just got my 935a today and this have white noise coming out even without any xlrs plugged in and the volume knob is all the way down like it’s on Mic and not line. Is this normal?
@sweettreeproductions2149
Жыл бұрын
Ours do not do that.
@revelationevents2323
8 ай бұрын
Hey I have the 945’s. I used them a week ago in open air and after 5 hours I touched them in the back where the amp is and they were hot. Is this normal? Do they heat up and then cool down?
@sweettreeproductions2149
6 ай бұрын
It is normal for them to get pretty warm. Especially outside.
@mrproblemchild88able
2 жыл бұрын
Wow why do you guys still have the original art735 are you willing to sell used???
@sweettreeproductions2149
2 жыл бұрын
Hi, sorry we are just seeing this. We just sold 8 of them but still have 2 left. Send us a message at info@sweettreeproductions.com
@bmwforlife1051
2 жыл бұрын
Hdm45a or those but just 945a version?
@sweettreeproductions2149
Жыл бұрын
The big advantage with the HDM45 is having Rdnet.
@christothegreat1
Жыл бұрын
Can you compare 935 against a 3 way box
@sweettreeproductions2149
Жыл бұрын
Possible so. Hopefully soon.
@Vela_Isai
2 жыл бұрын
Would you recommend pair of these RCF 935A or 4 RCF HDL20a(2 on each side) for medium sized events?
@djteknovibe93
2 жыл бұрын
The HDL-20A have better sound quality but don't ever use two per side because they have a horizontal dispersion of 100 degrees so two per side would give you problems unless the HDL20A cabs were spread apart by at least 30 feet. If they're close you'll get dispersion overlap and as a result, comb filtering. In most halls or small venues the HDL-20A cabs would be best stacked as a mono array, meaning in the middle. Line array such as the HDL-20A are designed to be used as either mono array centrally placed or only in very, very wide venues, say for example 80 feet wide venues then you can use one stack per side but even then you have to be careful not to place them near side walls or once again you'll get comb filtering.
@djsergiubulgar4922
Жыл бұрын
@@djteknovibe93 RCF HDM and new models Art 9, has 100 degreee gorizontal dispersion. Im absolutly agree with you, but is intereting what has to say RCF R&D team 🤔
@djteknovibe93
Жыл бұрын
@@djsergiubulgar4922 You mean HDL not HDM. Any professional sound engineer will tell you the same, if you use multiple speaker cabinets with wide dispersion angles (for example 90 degree or 100 degree) and you splay them or don't turn them enough to compensate for their wide horizontal coverage you WILL get comb filtering that is a 100% proven FACT!!!
@KurtKnispel3200
2 жыл бұрын
Thanks for the test. The 935 produces tons of distortion. Did you realize that your single tone low frequency analysis reveals that? You said something like "the 935 does some cool stuff at 60 Hz". Every peak above or below the actual sinus tone is a distortion component. Especially at 20 Hz the 935 produced three times more distortion than signal. So no output would be better for sure.
@travelthebest2676
2 жыл бұрын
How does it compare in this case to the competition? Do you think it’s because it’s housed in plastic?
@KurtKnispel3200
2 жыл бұрын
@@travelthebest2676 No, I do not think so. It is probably because of the LF-transducer. The other loudspeakers have lower distortion.
@travelthebest2676
2 жыл бұрын
Any recommendations in the same price range? I don’t think there is a great deal of competition sadly
@travelthebest2676
2 жыл бұрын
Plus is it audible to the listener, that’s the better question
@KurtKnispel3200
2 жыл бұрын
@@travelthebest2676 The loudspeakers are not designed to play 20 Hz and if used with a subwoofer it might not be a problem but this level of distortion is audible. It is more distortion than signal at 20 Hz, so you hear more of the distortion than the signal.
Пікірлер: 34