I was gifted a Jato 3.3 a year ago ran it a few times. Christmas week I decided to bring it out because my neighbor got one this Christmas. Never knew how much fun the Jato brings to a boring day. Great video bro! Happy New Years!
@Taboloncawonthemasters
2 жыл бұрын
You have got me to buy my first nitro! Always loved working on cars and tinkering with stuff. Finally found ultimate hobby to combine the two! 🤙🏼😎
@Taboloncawonthemasters
2 жыл бұрын
Got it and it’s running sweet! Got some back up parts. Ceramic bearings from rbmods, this pipe second hand, losi 3.4 carb, new piston/sleeve, con rod and a few others. Got another I’m wanting to rebuild for fun on the side as I like tinkering on engines at night after work. Question.. I know the dynamite.19 will drop right in to anything traxxas. Will the .21 dynamite drop right in as well??
@manofmanythingz4812
Жыл бұрын
That thing is pretty nasty ..I still would like to race it against the rc10GT..AKA the demon
@jakeandrules7724
8 ай бұрын
Whats your rc10gt have dome to it? I have a .21 modified ports and buku pipe actuated by a servo to control tuned pipe max power. Just like the "slippy pipes" used in go karts.
@tonialbritton251
2 жыл бұрын
I am glad to hear you got a BuKu Clutch, I just ordered one for my Revo 3.3, all contact info is dead, so I hope it comes in the mail. My next car will be the jato, I have 2 Revo 3.3 and love them. Great job and awesome build.
@Taboloncawonthemasters
2 жыл бұрын
Contact is dead?
@jakeandrules7724
8 ай бұрын
I had the same issue with that seller. I ordered replacement clutch shoes and the order just sat. I emailed and nothing. I had to do a paypal intervention and then he sent them. I dont understand, ive emailed this guy with plenty of back and forth emails about 8 years or more ago so im really curious whats up with him. Im also using his buku pipe but i control via servo for good low end and good mid and top. Im just a single speed transmission
@kgm5512
2 жыл бұрын
That thing rips for sure. Always been a fan of the jato
@krisjato
Жыл бұрын
Great video man, sounds awesome! I really like your shop setup, looks like an RC paradise! If I wasn't quadriplegic I'd love to have a setup like that for my 9 cars/trucks and my 2 boats. Thanks for sharing, you earned my sub. Have a great day!
@rcnitro001
Жыл бұрын
Wish my 3.3’s sounded like that
@jasonphillips8409
2 жыл бұрын
Like to see another Jato video.Im getting ready to get one soon.Gotta have it for my collection.
@TastyBRC
2 жыл бұрын
Love the Jato, great stuff 👍merry Christmas
@woogienitro
2 жыл бұрын
You too tasty
@johnnyjackson4490
2 жыл бұрын
merry christmas woogster ,good video as always.
@woogienitro
2 жыл бұрын
Thanks Johnny Merry Christmas to you too
@jerseyjasongasrc2576
2 жыл бұрын
Nice jato sounds good I use the duratrax box for mine just had to turn the wheel vertically not to hard! Can play with slipper clutch to get less wheel spin since got so much power! Enjoy merry Christmas 🙏🙏🙏
@woogienitro
2 жыл бұрын
Yeah the testing tune got shut down but we'll get it dialed in Merry Christmas to you too Jason thanks for all your help brother
@jerseyjasongasrc2576
2 жыл бұрын
@@woogienitro I switched to the revo clutch bell and gears cause there mod 1 mesh so much stronger teeth
@woogienitro
2 жыл бұрын
Yeah man that's my plan too the actual Robinson racing one that I have is the revo Bell so I have to switch out the spur
@jerseyjasongasrc2576
2 жыл бұрын
Excellent
@rakeemeverett4476
2 жыл бұрын
Love the jato bro...
@woogienitro
2 жыл бұрын
Thanks man I appreciate you checking it out
@rcsendandblast1579
2 жыл бұрын
Merry Christmas bud. I gotta see this I have a RC10 GT And a Revo 3.3
@woogienitro
2 жыл бұрын
Merry Christmas to you too we're just getting started on this jado 3.3 modded we're going to get her dialed in
@rcsendandblast1579
2 жыл бұрын
@@woogienitro it’s such a privilege watching your show I love your nitro channel bud. Take care dude thank you 👊😎Merry Christmas 👍
@jdpaslRC
2 жыл бұрын
Jato is awesome!
@420traxxasman
8 күн бұрын
Love the jato what crankshaft did you put in there? Just curious I’d like to try that.
@woogienitro
8 күн бұрын
RC renew...they sell them
@ericrude8908
Сағат бұрын
Are they that good? I saw some mixed things in there work/crank. I know its hard to go off the stuff you see on the internet but i wanted to get a crank for my revo 3.3. Idk if rick at. Rb mods still does them or not @woogienitro
@jamesklimowicz7591
11 ай бұрын
Woogie I'm a new subscriber love the content of this channel. Had a question on a traxxas 3.3 15 tooth clutch bell verse a 16 tooth clutch bell? If i change to the 16 tooth what are the benefits from the slightly larger 16 tooth clutch bell. Have a great day and thanks for the help.
@woogienitro
11 ай бұрын
You'll get a little more top end with the larger bell
@RideRightRc
24 күн бұрын
Hey man love the video, I have alot of rc's but just bought my first jato. It ran nice when I bought it 2 days later it runs sometimes then when I get down on it, it bogs an dies. Hobbytown says they think the motor is bad, please help!!!!
@NitroRcDr
5 ай бұрын
Hey Woogie, what's up brother. Are those the JAC2050 ?
@HaggardRC
Жыл бұрын
I bet it’s well strange having Christmas and it’s hot outside 😂 not to you obviously because you’re used to it. For us Christmas is cooolllldddddd
@woogienitro
Жыл бұрын
I'm sure..yeah South TEXAS..great weather mostly but it gets cold every now and then..right now we're in an ice Storm
@HaggardRC
Жыл бұрын
@@woogienitro Wow lol we're coming out of it now, today was 10 degrees. Shorts and T-shirt weather 😀😃
@jddd8385
2 жыл бұрын
Man your shop is amazing
@woogienitro
2 жыл бұрын
Thanks 💪
@jddd8385
2 жыл бұрын
@@woogienitro You’re welcome my Jayda blew up LOL accidentally hit salt water and after that That was it got to say were to try to buy a new engine LOL
@jddd8385
2 жыл бұрын
@@woogienitro Sorry for the typo got to save up money to buy another motor
@blownbushinggarage540
2 жыл бұрын
That things awsome I’m thinking about building my slash 3.3 into a drag car if possible
@NitroRcDr
6 ай бұрын
What's up brother, man you inspired me to get a Jato hahah I got it and Just rebuilt it and was wondering what wheelie bar you are running there.
@woogienitro
6 ай бұрын
It's a drag/strc wheelie bar that I used 1/5 scale Baja sway bar links to adapt
@NitroRcDr
6 ай бұрын
Gotcha ! Looks way too cool brother. @@woogienitro
@ricardopeterson587
10 ай бұрын
What did you use to make that wheelie bar work for the jato
@woogienitro
10 ай бұрын
I modified the STS wheelie bar that's meant for the drag/I used some parts from a fifth scale sway bar to adapt it. I think if you go back and one of those jato videos I show it
@RideRightRc
24 күн бұрын
Also did the factory reset on the valves, same thing
@mrgarlock4626
Жыл бұрын
Really nice builds woogie,I wish my 3.3 ran that good. Can you help me get mine running right? I’ve gone through 3 engines already. The rear bearings get loose by the end of break in even when I heat it up to 220 before starting it. I also tried putting new bearings in twice and after 4 or 5 tanks there’s play in the crank. I’m so confused
@ryanlarbi8157
Жыл бұрын
Are you keeping an eye on engine temperature when breaking in? A teeny tiny bit of play is normal. I usually don't need to replace my stock bearings until at least 2-3 gallons after running very hard constantly
@woogienitro
Жыл бұрын
@ryanlarbi8157 yeah I watched the temperatures during break-in for sure but not when I run. That's the only time I use a temp gun is during break-in
@ryanlarbi8157
Жыл бұрын
@@woogienitro I was responding to the comment above because he was saying that his rear bearings get loose by end of break in
@ryanlarbi8157
Жыл бұрын
@@woogienitro also you should throw in a high speed cooling fan on the handle of the car with zip ties facing the cooling head, and place a small aluminum fuel cooler behind that fan coming from the exhaust pipe with some longer tubing and shorten the fuel line a good bit. My result is much lower temperatures with a leaner performance tune, very consistent performance from full to empty tank, and fuel that keeps a steady temperature and never boils. You should have no problem with battery life if you have a lipo hump pack. I use the traxxas app to keep an eye on temperature with a live feed. To make sure in never goes much past 270. My rig has an O.S 11K carb, lightweight chassis, high capacity air filter, and the fan has a sensor that goes inside the glow plug area and only activates the fan once the engine reaches about 180-200F super fancy shmancy 😉 and if you want more low end power I suggest to tune the transmission to shift later. You'll know this type of transmission tune once you only hold it half throrttle in the mid range it should a long while to shift to second and hold first gear for a good time. But becareful to not have it shift way too late, because you will blow your second gear fast
@woogienitro
Жыл бұрын
@ryanlarbi8157 ahh..kk
@godsun358
2 жыл бұрын
NIce work
@fivefif6763
5 ай бұрын
Are your Jacos pink and purple?
@bigvirgo6423
Жыл бұрын
Hey Woogie, have you ever converted the front jato tires to hex? and if so how did you do it? Also jato parts and upgrades are hard to find, do you have a shop you prefer for parts /upgrades?
@woogienitro
Жыл бұрын
Have never converted to hex
@bigvirgo6423
Жыл бұрын
@@woogienitro ok, love your content man it's RC on steroids!!
@donfoss45
2 жыл бұрын
She sounds good bro what fluid you running in the back
@woogienitro
2 жыл бұрын
Haven't touched it Don it's all stock we're going to pull it apart though and fix her up
@kevinquiles2162
3 ай бұрын
Where can i get that exhaust for my jato 3.3
@woogienitro
3 ай бұрын
Prob can't..it's a Novarossi 41015 on road header and a 1/10th scale THS pipe..never know..chkn ebay
@chadpennington4594
Жыл бұрын
Bro....I bought that brake kit...it and the stock brake both will not disengage! How do I fix it! Lol.
@woogienitro
Жыл бұрын
Make sure all your linkage and spring are all adjusted properly. Also with your end points on your servo
@chadpennington4594
Жыл бұрын
@Woogie Nitro servo! Aahhh didn't think about that! I did a complete rebuild and put new ones on... thanks!
@rodc8055
2 жыл бұрын
She is screaming nice work
@luisrios4017
2 жыл бұрын
Is that jato running the stock conrod or an upgraded one. If upgraded witch one are you running??
@woogienitro
2 жыл бұрын
Stock rod
@joshuarobichaux4479
Жыл бұрын
Can you please give me the part number for the front and rear wheels?
@woogienitro
Жыл бұрын
The front one is not a hex. It's a bearing as you may know if you have a jado If you can find it. The front is jayco foam tire j a c2020 LP and then I'll have to find the rear. The rear is a hex
@joshuarobichaux4479
Жыл бұрын
@@woogienitro I was having hard time finding so if you have a part number on front and rear and where you found them. Thank you for you help
@weemanvr6
Жыл бұрын
What wheelie bar is that
@woogienitro
Жыл бұрын
If it's the one on the jado I custom made it to fit. It's an STRC drag/wheelie bar, but I'm using some sway bar pieces from a Baja 5B and some bearings
@kaycee9337
2 жыл бұрын
What was wrong with the low? Because when you finally tune the hs the bottom will clean up but the low sounds great idk.but on those engines when you lower the idle it leans out the bottom
@woogienitro
2 жыл бұрын
It's all good man I think my main purpose of building the drag jato was not the technical issues with it but to let people know that Traxxas is not a bad product and it is what you make it not necessarily a tuning video
@kaycee9337
2 жыл бұрын
@@woogienitro yeah but tuning plays a big role you can have an expensive RC and if you're tuning is off it'll be the slowest a stock jato will beat you. But that engine sounds so healthy it was basically tuned except for the high speed and the idol and that thing started ripping
@woogienitro
2 жыл бұрын
Remember that 3.3 is modified
@kaycee9337
2 жыл бұрын
@@woogienitro of course I remember its modified that's why it runs like that I can tell a modded motor just by hearing it for 8 seconds
@kaycee9337
2 жыл бұрын
Low sounds good to begin with lol
@TexasHill
Жыл бұрын
Man, that Jato is the Sh&t !!!! you should bring that one out with you this weekend... Are we doing Saturday or Sunday ?
@woogienitro
Жыл бұрын
As long as there's no activity.. sometimes they are playing sports
@TexasHill
Жыл бұрын
@@woogienitro -oh dang, I forgot about that. I saw some littl\e league people practicing last week, so it's probably about to start.
@woogienitro
Жыл бұрын
That's why I like to go during the week kind of in the morning if I have time off when no one's there but we'll check it out
@kaycee9337
2 жыл бұрын
How can you tell to give it a little more on the high if you haven't gave it high yet
@woogienitro
2 жыл бұрын
By the sound of the engine
@kaycee9337
2 жыл бұрын
@@woogienitro I understand that but you can't really tell until you get out of second gear. Sounds pretty good though I liked it
@brandonwindsor5313
2 жыл бұрын
You a link to the front hex conversion man cant find it happy 4th
@woogienitro
2 жыл бұрын
I did not do a hex conversion on the front. The jado comes with a bearing instead of a hex. You just have to find those wheels specifically for the jato
@timothywilliams9556
2 жыл бұрын
Would you happen to have any nitro engines for sale sir?
@woogienitro
2 жыл бұрын
No man I'm sorry
@evanmeneilley3228
2 жыл бұрын
Merry Christmas Woogs
@woogienitro
2 жыл бұрын
Thanks and Merry Christmas to you as well
@812_traitor2
Жыл бұрын
What carb you running?
@woogienitro
Жыл бұрын
That's the losi 3.4 carb
@812_traitor2
Жыл бұрын
@@woogienitro been looking around. Can’t find any in stock. Thanks!
@woogienitro
Жыл бұрын
They had them at amain hobbies a while back
@coreytarducci36
Жыл бұрын
Did you put that back plate on? Wanted to do the same to my Revo 3.3 but the crank has a nub for the electric start and hits the plate.
@woogienitro
Жыл бұрын
Mine is a modified race crank..you can cut the pin off..just do it nicely
@allengardner8516
2 жыл бұрын
What brake setup is that?
@woogienitro
2 жыл бұрын
Dual carbon fiber hot racing
@allengardner8516
2 жыл бұрын
How do you like it? The stock ones suck.
@brandonwindsor5313
2 жыл бұрын
Hey man what part do u buy to run the jaco foams up front
@woogienitro
2 жыл бұрын
You don't have to buy up any particular part but it's a certain type of front wheel. I'll try and get you the jayco part number for it but they're very hard to find it. Can't have a hex hub. It has to have the round bearing on each side
@brandonwindsor5313
2 жыл бұрын
@@woogienitro oh i completely understand i have hexs on rear only. The bearing style fronts are so hard to find a part number would be awesome man
@brandonwindsor5313
2 жыл бұрын
@@woogienitro some people do front conversions which allows hexs up front but id rather not do that
Пікірлер: 110