x230 with a x220 keyboard mod! this guy really knows what he is doing. i hope u run linux on daily basis and you are on windows just for this! respect brother!
@barashhyusein7907
2 жыл бұрын
@@eepykami no problem. man u got xyz domain, minimal website... Luke Smith follower? :D btw whats your github, would like to get in touch if possible.
@mantaalexandru-1237
3 жыл бұрын
Hi, what should I need to choose for a vectra C (2006) in that list? I really want to find my security code because my CIM in has some problems.
@dirkpodszuweit3672
Жыл бұрын
Hello and thank you for this video. I´m trying to read the file from the EPROM of an ECU of a Corsa C Z12XEP. The dongle is a MPPS v21 comes with the software. The ECU is identified by this sorftware, but it can´t read the EPROM. The massage: "invalid Key". I try to find some information in www - also unsuccessfully. Maybe you can give me a hint.
@brainscan83
2 жыл бұрын
thanks for video i have 2 questions what s the tool for this process(i am not talking about opcom) another question you dumped the epprom from ECU so can you dump from BCM? thanks
@carnagecaraudio8806
2 жыл бұрын
In my case reading the eeprom caused the spanner wrench with the car to light up. I tried a universal Bluetooth obd scanner but not codes appeared. Then I used opcom to scan and I had "P0602-48 injector quantity adjustment not programmed " error. So I programmed the injectors using opcom and everything works fine now.
@riickysosa
3 ай бұрын
cela a bien fonctionné pour trouver le pin code ?
@fongy200
2 жыл бұрын
Hello m8, I'm having a torrid time with my little ecoflex. It's got the same dtj ecu as yours. I need to do all that your demonstrating. If I contact you for a little help would that be ok? Providing your able to. Thanks for your upload it's reinvigorated my faith in doing sorting it myself.🙏
@WheelzonWheels
2 жыл бұрын
Hi, amazing video! Do you know if this is possible for the Corsa D 1.2 Z12XEP engine? Seems to be Bosch ME 7.6.2 I have just swapped the ECU kit on a car and I need to correct the mileage.
@WheelzonWheels
2 жыл бұрын
@@eepykami thanks for the reply!! Annoyingly I need the Pass Code to be able to amend the mileage, do you think with this cable and software it’s possible on this ECU?
@WheelzonWheels
2 жыл бұрын
@@eepykami amazing thank you, it would be great if I could do this 😊
@WheelzonWheels
2 жыл бұрын
@@eepykami amazing, I’ll give it a go I think!!! Thank you so much
@331richie
Жыл бұрын
Hi Kamil. I have copied what you said but the 4 digit code you have isn't there on mine. My vehicle is a 1.0 3 cylinder corsa D 2008. I used the corsa 1.0 selection in the menu. Any ideas?
@331richie
Жыл бұрын
Hi Kamil thanks for replying. I decided to contact vauxhall pentagon and paid £30 for the 4 digit code. I work as an auto sparky but not usually indepth programming of the ecu and body control module. It turns out my bcm somehow switched off a few settings and saying the can bus cant communicate to all the modules. Anyway i reset/ reprogrammed the bcm and all is ok. I used the search function within HXD to look for my 1480 code with no luck. I even scrolled through all the files and couldn't find it even though i know it. I assume your more interested in the programming side but i usually work on the practical side of electrics and mechanics so give me a shout if your stuck on finding a fault with your car.
@331richie
Жыл бұрын
Just seen your video on deleting the egr. Good work. What else does this mpps v18 ive got do on a corsa? Ive just ordered a new egr aswell haha
@331richie
Жыл бұрын
@@eepykami my missus and brother have astras j 2013 but one has the 1.7 diesel and one has the 2.0 diesel. It says error even trying to read the ecu on the 1.7 but it does show the vin and installed software date. I tried all the astra models and none work. Seems like the software doesnt work on some models.
@331richie
Жыл бұрын
@@eepykami i tried the other modes with no luck
@331richie
Жыл бұрын
@@eepykami mpps does seem abit hit n miss on what it can do
@sedatb.3593
2 жыл бұрын
Hi my friend , i have another question. If bcm Immobilieser not accept the security code. What can i make ? Because my ecu i changed. And programmed with mpps all epromm flash micro. And now car starting no dtc code. But bcm not accept the original security code. I dont know what can be. Tried another opcom version but same problem. Wrong code entered says
@sedatb.3593
2 жыл бұрын
Thanks i fixed it. Before programming immo. I have to engine on otherwise it not accepted code. Also Before enginw on than accepted this code :)
@sedatb.3593
2 жыл бұрын
@@eepykami Yes you can save :) i have my corsa 3 month. Now i like a prof ecu swap, ecu programing, eeprom, flash and micro i can all flash with mpps v18 and too egr off dpf off :)))
@sedatb.3593
2 жыл бұрын
Hi, i have a question. Opcom or vauxcom very very slow working on the window 10 But your opcom fast working. I think not compatibel windows 10 opcom app. But it works good. How cann i download fast opcom version for win 10?
@sedatb.3593
2 жыл бұрын
@@eepykami Thank you Kamil ! You are turkish ?
@sedatb.3593
2 жыл бұрын
And i have a problem with mpps Power status high says.. I do this without car. Ecu in my home. Mpps tool How many volt be ?
@sedatb.3593
2 жыл бұрын
@@eepykami Dziękuję Ci :) What kind of power adapter would you recommend? I was tryed today with car obd no problem but i want to in home making.
@ReadGospelOfJohn
2 жыл бұрын
Do you know if MPPS would work with ECU of A13DTC ? Thanks :)
@ReadGospelOfJohn
2 жыл бұрын
@@eepykami thanks for reply. I wonder how did you get that ECU number. I didn't see anything like that on the sticker. Confusing for me is that the my car is Corsa D 1.3 ecoflex (2011) - not Insignia. Was that engin also in Insignia? Buying MPPS just for tests is pointless as probablt I will never use it again. Just looking for cheaper and better way to get my car code. Vauxhall wants 40 quid. This is not cheap and there is always risk that someone swapped whole ECU/BCM/etc. set for another one and code provided by dealer won't work.
@ReadGospelOfJohn
2 жыл бұрын
@@eepykami thanks again. It looks it won't be piece of cake. Eproms of other modules can't be downloaded with OBD socket, so they need to be soldered out and plugged to xprog or something like that. It's more expensive then option with dealer. Today I realised that actually I have no locking nut key either... so lovely another cost as I need it in case of flat tyre. Anyway thanks for your help. Happy New year.
@mechanick1000
2 жыл бұрын
code is held in the cim
@teachies902
3 жыл бұрын
that is a title
@ciaprisoner
3 жыл бұрын
gay guy car
@ciaprisoner
3 жыл бұрын
@@eepykami I drive a based Ram 1500 with a 5.7l hemi, I'm extremely hetero
@Roverturbo
2 жыл бұрын
What a dick comment….hope that made you feel better about your obviously miserable life…!
Пікірлер: 35