The problem is the led Board itself. I solved the problem with the led brake light-replacement with a new tail light.
I bought DEPO 4461903RLDUE / 446-1903R-LD-UE (right)
446-1903LLDUE / 446-1903L-LD-UE (left).
Original #lantern #Audi A6 C6 VAG has article 4F5945096N (right), 4F5945095N (left)
The symptoms are as follows: in the first few kilometers the brake lights work, then they begin to flicker and an error RIGHT BREAK LIGHT appears on the scoreboard, after that the power of the brake light is cut down.
First of all I checked VAG-COM errors:
00988 - Lamp for Brake Light; Right (M10)
009 - Open or Short to Ground
She says there's a problem with the "earth"contact.
After disassembling the headlight, cleaned the contacts, put the shrink-the error did not appear for five or ten minutes, then reappeared.
The second step I decided to replace the "ground", connected a separate wire to the bulb, which had no error. But that didn't help either.
I came to the conclusion that the problem should be solved by soldering the Board with LEDs. To do this, you need to remove the glass, but the headlight is not collapsible, so you need to warm and cut the sealant.
As the issue price of new aftermarket headlights 4300 rubles - decided not to experiment and buy DEPO
=====================================
Link to Audi A6 playlist self-repair and maintenance
• Audi A6 C6 ремонт и об...
Негізгі бет Автокөліктер мен көлік құралдары Rear LED Break Light AUDI A6 C6
Пікірлер: 50