This is the most important step that no one else shows you. It also works for the 3.6 in Jeep Wranglers. 👍
@motorcarnut
Жыл бұрын
Thank you, I appreciate the comment.
@lakeschoolrestorationchann1567
3 жыл бұрын
Excellent video and thanks for the heads up 👍🏻
@motorcarnut
3 жыл бұрын
No problem, glad I can help 👍
@larrymonaghan7318
2 жыл бұрын
My 1.4 dart has a similar setup but no installation ring. Should I use a feeling gauge to shoe horn it on?
@motorcarnut
2 жыл бұрын
Not a bad idea, just be careful not to nick the seal with the feeler gauge.
@diegosgarage6440
3 жыл бұрын
Nice and useful video.
@motorcarnut
3 жыл бұрын
Thank you
@queensapphire7717
Жыл бұрын
I’d try ATF 205 before anything else
@motorcarnut
Жыл бұрын
Don't hurt to try, I guess.
@morganmorgan365
2 жыл бұрын
Great video
@motorcarnut
2 жыл бұрын
Thank you!
@tylerholt3135
Жыл бұрын
Where can I buy that installation ring I can't find it anywhere
@motorcarnut
Жыл бұрын
Most of the times it comes with the rear main seal. Try FelPro
@donaldpulicicchio1312
Жыл бұрын
Great video, do you have a part number for the seal ring?
@motorcarnut
Жыл бұрын
I used FelPro BS 40713, good quality seal and comes with installation ring.
@queensapphire7717
Жыл бұрын
Never understood why main seals are so fragile.
@motorcarnut
Жыл бұрын
Most are not bad, but they're are the exceptions.
@mattthomas1369
2 жыл бұрын
Might help to add some silicone grease on it to help
@motorcarnut
2 жыл бұрын
Still it's the way the seal is pointed, you need that tool.
@queensapphire7717
Жыл бұрын
$1000 in labor for a $60 part, ugh !
@motorcarnut
Жыл бұрын
Can be
@guillermoontiveros6267
11 ай бұрын
Where can I get the seal alignment tool
@motorcarnut
11 ай бұрын
It usually comes with the seal already attached
@Lane-v2u
Жыл бұрын
Once the crankshaft seal is goes on at means it sealed right
@motorcarnut
Жыл бұрын
Yes, has to be even all around as well.
@Ann-rl2kl
Жыл бұрын
Okay thank you
@motorcarnut
Жыл бұрын
@Ann-rl2kl no problem
@michaelmartinez537
3 жыл бұрын
Does this fix a A transmission leak?
@motorcarnut
3 жыл бұрын
Rear main seal is on the engine for an oil leak, but once there it’s easy to replace the converter seal on the transmission
@recon20671
2 жыл бұрын
Thanks. Replaced today
@motorcarnut
2 жыл бұрын
No problem, great to hear that!
@fabriziodilelio2138
3 жыл бұрын
NONOSTANTE IL VIDEO NE HO ROTTI DUE.
@motorcarnut
3 жыл бұрын
Don't understand you, if you could ask in English maybe I can help you if needed.
@ryanlewis6095
2 жыл бұрын
Awesome video thanks
@motorcarnut
2 жыл бұрын
Thank you!
@prosise15
3 жыл бұрын
Do you happen to have the part number?
@motorcarnut
3 жыл бұрын
Yes, for the Fel Pro which comes with the installation sleeve and good quality Fel-Pro BS 40725
@prosise15
3 жыл бұрын
@@motorcarnut Thanks!
@motorcarnut
3 жыл бұрын
Sorry, wrong part number, it’s Part No. Fel pro BS 40713, the other one was for a VW I was working on.
@cesar2584
2 жыл бұрын
Will this be the same for my 3.7 07 Jeep commander?
@andyking9673
3 жыл бұрын
put sealer on flywheel bolts
@motorcarnut
3 жыл бұрын
Sealer is not required according to manufacturer, but thread lock is a good idea.
@andyking9673
3 жыл бұрын
@@motorcarnut I recommend that anytime the flywheel bolts go into the crankcase that sealer/locker be used. I have funny story about a Dodge dealer that replaced a late model engine 3 times for an oil leak and the source of the leak was those bolts. Dodge was not impressed.
@motorcarnut
3 жыл бұрын
Yes, you’re right especially when the flywheel bolt holes are exposed into the crankcase. Good point.
Пікірлер: 45