Thank you SO MUCH!!! I was so confused about one of my spacers. Most videos skip so much detail. This one showed exactly where everything goes in detail. I'm sure that you have moved on from this YEARS ago. But it helped me SO much!
@theoverengineer
11 ай бұрын
Glad it helped!
@mytek998
4 күн бұрын
Finally someone who explains things in detail. Thank you!
@Jake-qo1eg
2 жыл бұрын
Thank you for this video! Only one i could find that showed everything I needed when i realized i didnt know what directions my spacers needed to go!
@theoverengineer
2 жыл бұрын
You're welcome!
@Wizznilliam
11 ай бұрын
The spacers part was EXCELLENT... And not covered in most videos. Made my day. Thank you from a new DIYer!
@erxfav3197
Жыл бұрын
Very very good video… Especially the part showing the spacers in the axle.. I couldn’t find any other video showing it especially like that.. Thank you
@theoverengineer
Жыл бұрын
Glad it helped
@Wizznilliam
11 ай бұрын
Same for me! That part about the spacers helped me SO much. THANK YOU! Great work!
@hollandhollywood329
4 ай бұрын
Your vid was very helpful , thanks, especially the placement of the spacers.
@marlorup
9 жыл бұрын
Another excellent video. I really like how you take the time to show the small details on all the parts, like the minute filings on the ABS brake sensor. Please keep the videos coming. I enjoy watching them all, and have learned a lot watching and listening to them Thank you for sharing your knowlege with us all. Mark.
@theoverengineer
9 жыл бұрын
+Mark R. Thanks for the feedback. I do work hard to make really clear picture with possibly the shortest script. I know many videos are still long but I try make them worth the viewrs` time with meaningful content not cutsie crap.
@jot8686
8 жыл бұрын
Thanks for this video! It answered a few outstanding questions I had that the full service manual neglected to mention.
@allanbarlow685
4 жыл бұрын
This is the nearest video I have found to remove my Vulcan 650s ABS wheel - Thank You!!!
@videocardzrule3097
2 жыл бұрын
That chain needed some love.
@keatonmoore7413
Жыл бұрын
Thank you so much
@howardscott4889
5 жыл бұрын
Hi was wondering if you could shed some light on this problem,I've recently taken off the back wheel from my 2013 zx10r to have a new tyre fitted,everything came off with ease but putting it back together is where the problem started,I can't get the backing plate on without knocking off the spacer,there's no room whatsoever,can you help?
@theoverengineer
5 жыл бұрын
It's tight fit , a specific fit with a unique geometry, puzzle pieces only go together one way correctly. Take your time to line up everything, don't damage the thread on the axle, don't damage the brake rotor, no need for banging.
@Clintwoodz
9 жыл бұрын
My bike veers to the right since new, does your bike veer to right when letting go of the bars? I've changed my tyres to dunlop q3 yesterday and it seems to be same, if I want to make it ride straight, which way should I adjust the adjuster nuts?
@theoverengineer
9 жыл бұрын
+SexyToshi Check out rear alignment, carefully take measurements by either methods in this video kzitem.info/news/bejne/laNv2piKh2SAfqQ The bike still might pull to one side if the fork lengths are not identical. This could be caused by slightly inaccurate mounting into the upper and lower fork bridges; we`re talking a few millimeters. Depending on which side the exhaust cans are mounted, the L and R sides may not be balanced at all by the manufacturer. When the bike is suspended by 2 engine levelers, it is easy to see. That might also contribute to pulling to one side.
@ahamayman1
6 жыл бұрын
Measure the center of the bolt that connects your swing arm to the frame to the center of the axle on both sides. Have both those exactly, to the millimeter, the same and your aligned.
@bikerboyg
9 жыл бұрын
what kind of lubrication did you put on the axel and bearings? BTW thank you very much fore your clear and perfect how to
@theoverengineer
9 жыл бұрын
+bikerboyg Yamalube marine grease. Bought a tube 12 years ago.
@MohawkNinja636
6 жыл бұрын
Good video except it left out the part I actually needed....getting the brake caliper back onto the rotor WITH the brake pads on it. Lol
@theoverengineer
6 жыл бұрын
Probably on this rear brake video: kzitem.info/news/bejne/2W2b3519nn6TqI4
@remainstrongcarryon5363
4 жыл бұрын
My biggest issue is the brakes..... I watched the entire video and you did not put in the brake part 😡
@theoverengineer
4 жыл бұрын
Where does the title or description promise ANYTHING about brakes?
@remainstrongcarryon5363
4 жыл бұрын
@@theoverengineer the brakes are a part of the rear tire assembly correct?
@theoverengineer
4 жыл бұрын
Not really.
@remainstrongcarryon5363
4 жыл бұрын
@@theoverengineer you need to put that part on for the bike to function at 100% correct? And it is a part that goes on the rear tire correct?
Пікірлер: 33