Very helpful. Got mine cleaned up in less than an hour. Thanks.
@harrystanley1651
2 жыл бұрын
Excellent Video, very detailed and helped me clean up my carb on my 27-year old HR214. Thanks a lot.
@davidgpo
2 жыл бұрын
Thanks for watching!
@jdkrxw
Жыл бұрын
Good video. In a pinch, the main jet can be taken out and cleaned without removing the carb. This solves 90+% of fueling problems. Remove the bowl and find a flat blade 1/4" screw driver bit that's about an inch long. You can use a bench grinder to get the shape that works, and use a 1/4" wrench to turn it.
@davidgpo
Жыл бұрын
Thanks for the helpful tip and thanks for watching!
@dearthworm
6 ай бұрын
FYI. Shutting off the fuel and running the engine until it stops does not eliminate all fuel from carb. The float bowl will still have gas in it. You need to drain the bowl using the drain screw.
@normanbfifteen3468
Жыл бұрын
Man I must say...you have patience... you did all this with mower on the ground.
@davidgpo
Жыл бұрын
Thanks for watching!
@routtookc8064
2 жыл бұрын
The plate sitting on the front of the carb, was it flat? I have mine apart and the plate has a slight curve to it.
@davidgpo
2 жыл бұрын
It is flat.
@routtookc8064
2 жыл бұрын
@@davidgpo thanks
@glennkubik3774
Жыл бұрын
Quite sure Gasoline breaks down Silicone, gunky residue. But very good Video 👍
@davidgpo
Жыл бұрын
I believe that you are correct. Thanks!
@dominikwojtas2550
4 ай бұрын
Hi , that's amazing content!! Your not smoke at all!!! Change you piston rings allready? Greetings from Poland 😉
Пікірлер: 15