Learning so much watching you set up a bow. You make it look so simple and straight forward. Can't wait for the follow up. Thanks for taking the time to put these videos together!!
@MostlyPeacefulCombatVet
Жыл бұрын
I f’n love these videos! I wish I had a pro shop around here that could help get a bow setup PROPERLY, but I don’t. So these definitely help a guy like me know what to look for when dialing in right out of the gate.
@michaelpoplawski3246
Жыл бұрын
I don't know if you wore the Hoyt shirt for effect, but it made me chuckle to see the "Get serious, get Hoyt" tag line while you were setting up your Bowtech bow🤣Great content, love the features that Bowtech put into the Reckoning.
@lindesylittlechief9056
Жыл бұрын
Your videos are fire 🔥 by the end of them I not even pooping I just sitting on the toilet keep them coming
@Jalexander61
Жыл бұрын
MFJJ, this is a general thanks! Im a new shooter and following your channel ive learned so much. My shooting is greatly improving and my bow repair & setup skills as welll. Have a great weekend! From NY!
@perryknetter8577
Жыл бұрын
Thank you Josh for the great informational video Always learn something and great to see someone sharing all this knowledge God's Blessings on all your adventures
@houghtonic1975
Жыл бұрын
Thank you for the detailed explanation of how you set the cam lean to start your tune. Great video
@johnmclaren1666
Жыл бұрын
It's cool how you just grab top dollar accessories off the shelf and don't even blink🤯 Great looking bow! Looking forward to your next video.
@FIVE6-qk6pc
Жыл бұрын
He's making so much money just from online sales alone
@iamthepawpaw
Жыл бұрын
You know Bowtech and GAS are cringing when MFJJ says, “ Just change the factory settings.” Love the content brother.
@joshuaborowy2078
Жыл бұрын
Does it come with them from the factory or something
@thenameiwantedwastaken
Жыл бұрын
Imagine how Hamskey felt when he broke the top plate of his rest
@iamthepawpaw
Жыл бұрын
@@thenameiwantedwastaken 😂
@brianklebowski243
Жыл бұрын
@joshuaborowy2078 gas strings are going to be an added cost. Not a bowtech factor string
@joshmorris8510
Жыл бұрын
Great info on setting up a bow! Have learned a lot watching your videos.
@Sticksniper0625
Жыл бұрын
I am trying to learn all I can on how to work and set up my own bows . When you started the first thing you did was set your nocking points with a square, how did you know exactly where to put them without your rest being on the bow ? Did you just line up with the burger holes on the bow? I really appreciate all the content on the how to’s
@belinfamily2762
Жыл бұрын
Thanks a bunch for all the info MFJJ!!!
@royhoglund1322
Жыл бұрын
Slow is smooth, smooth is fast. Ha, you looked a little rushed! You definitely make setting up a bow look easy! Can't wait to see the rest.
@andreschafer4675
Жыл бұрын
Awesome video, I'm just learning to tune my own bows and learned a few new tricks here! I'll be looking for you in Big Sky to say "Hi"!
@williamhart8087
Жыл бұрын
Great content and information as usual. Look forward to seeing it shoot.
@ghaugsness
Жыл бұрын
Definitely like getting a different perspective on how you go about setting up bows!
@darrenlowry7477
Жыл бұрын
Watching a guru like MFJJ set up bows is awesome.
@adamhalcom1608
Жыл бұрын
Always great to see your vids you have taught me a lot
@kenlafaive9336
Жыл бұрын
Always enjoy all your videos and learn so much.. Just wondering if you know of a way to sharpen the innerloc or muzzy replacement broadhead blades? I have been looking for a long time with no luck finding a system that will sharpen them. Your help would be appreciated.
@BucksBeesS.C.
Жыл бұрын
Looking for the same just to fine tune the edge the right way
@clintmurray3795
Жыл бұрын
Love these bow builds!
@jasoncharles9748
Жыл бұрын
Awesome content! Keep them coming!
@wx7yp7
Жыл бұрын
More in close camera of bow perhaps second or third fixed for details .
@UpNorsk
Жыл бұрын
I need to see a video on wheeling. My brain cant make sense of putting the laser at the middle of the cam. If the laser is 1/8" off the bottom cam wouldnt you want it an 1/8" off the top so its running square and parallel to each other?
@CamArmstrong-sl5vn
Жыл бұрын
Same result. He just uses center of cam as reference.
@callummethley5082
Жыл бұрын
I was thinking the same...the offset of the laser has to be zero
@TheDanielBrown
Жыл бұрын
It’s good to know even the best has issues putting things together I’m glad it’s not just me😂
@bradheath2592
Жыл бұрын
Enjoying the content , Keep it up !
@callummethley5082
Жыл бұрын
Love this full build and setup!!! Loads of good stuff.... Question - what is the rail and threaded rod on your DIY draw draw board called (the u--shaped channel)???
@jasondukette4155
Жыл бұрын
Learn a lot watching mfjj keep up the videos hope to see how you shot at Redding archery shoot
@tylerlee5349
8 ай бұрын
Thank you for the info. I’m having the hardest time getting my bottom cam to line up. The top of the bottom cam is leaning WAY away from the riser (top left). I swapped the shims to have the cam move to the right. I’m now questioning if I moved the right direction as the lean seems the same or maybe even worse. Let me know something before I mess something up please. Thank you!
@colerichardson7435
3 ай бұрын
Badass bow
@archerash6695
Жыл бұрын
My #1 teacher.
@xcr-fg7nd
Жыл бұрын
Pretty impressed with Dans 48 yrd turkey shot. What does your scope image look like? What made you choose that size and configuration. Thanks.
@thorwaldjohanson2526
Жыл бұрын
About to get my Reckoning Gen2 36 set up as well, so THANK YOU for this video! Question: What / how much of a difference do these aftermarket cables and string make? Are the Bowtech ones bad or lacking in some regard?
@crustymarine86
Жыл бұрын
Make a video on how you made the drawboard
@kentrawlins7031
Жыл бұрын
Nice job thank you
@NeilEubank
Жыл бұрын
I would like to see a product review on the new g5 mark arrows.
@woodduck1414
Жыл бұрын
Josh have you ever used a prusik knot instead of the football style clamp for the rest chord? Pros cons to both?
@djlaxton5687
Жыл бұрын
always so much advice! idk if you have addressed it in a video before, but is there too fast of a speed for mechanicals? my bow is tuned up pretty well and fieldtips group well. im shooting 305fps right now at 30in draw
@grant6608
Жыл бұрын
Please do a video on building your own sight tapes
@chrisennis1915
9 ай бұрын
Totally getting one and using it for hunting and 3d and tac
@wesmurer6884
Жыл бұрын
Why did you settle on 60lbs not 70lbs for the Reckoning.
@jimmyno1337
10 ай бұрын
So 2 part question. 1 did you go with the med cam because of speed efficiency? 2 I currently shoot a PSE Shootdown Pro at 30.5 with the letoff at 85%. Would that be too much to lengthen the string?
@hershelr.sullivaniii7139
5 ай бұрын
I looked through your videos, and I never saw a follow up to this one. Did I miss something?
@josephdipietro8367
Жыл бұрын
I didn't think you would of been a flashy color guy. Doesn't matter for foam thou.
@tysobol
Жыл бұрын
Hope to see you guys there! I'm shooting Sunday
@wadephillips3882
Жыл бұрын
How about directions on how you built your draw board that would be cool
@ThomasAnnaAdventures
Жыл бұрын
If you just added twists to the cables without making an adjustment to the string would your draw still have changed, or do you have to manipulate both the cables and string? My partner has a short draw and her current bow max is 56 lbs, the bow she had prior was just over 60. We wish we could get more pounds out of the new bow. If there was twists added to the cables the poundage would go up but would we also have to manipulate the string to prevent the draw length from changing?
@johnmclaren1666
Жыл бұрын
Not sure of your bow brand. If I put one full twist into both cables I gained just about 1.5lbs. You should have to add one twist to the string for each twist in the cables. Just do one twist at a time and see how the bow reacts. These results are from a V3X-29
@Silbar89
Жыл бұрын
Wish we got a tight shot on the limb driven rest cable position. Maybe drop it as a short?
@clintonmoore1070
Жыл бұрын
The ends on bowtech limbs with the deadlock cams taper in, then flare out where the cam brackets bolt onto the limb. This makes a slight hourglass shape that he tied the cord into the middle of.
@jeff_8789
Жыл бұрын
Already ordered now gotta sell my new uv button don't really care for it anyway been using my carter til I find something else but this is gonna be awesome
@danielleuteplace535
Жыл бұрын
Would you throw in a video on shooting in your rail like you mentioned at the end?
@goldtip34
Жыл бұрын
Paper tune after putting the stabilizers on and see if there is a difference. Nice video and nice bow
@bmook019
Жыл бұрын
Stabilizers can make a huge difference. Adding a front bar can change your left to right tune.
@goldtip34
Жыл бұрын
@@bmook019 would you tune with them on or off
@bmook019
Жыл бұрын
@@goldtip34 I would tune it how you're going to shoot it
@adamvisser9815
Жыл бұрын
When you were paper tuning the bow do you recommend doing close like you did, or should it be done with the paper at 20 yards?
@davidpitts8921
Жыл бұрын
Why don't you use a prusik knot instead of the clamp on the rest cord?
@madman432000
Жыл бұрын
When shortening the cables and lengthen the string do the cam timing marks, if they are present, stay the same as factory or will they be in a different location? I read a discussion about colored string loop material of specific colors that will not hold well on the serving. Any thoughts on that? Black held better and pink was not holding well at all.
@brianklebowski243
Жыл бұрын
Timing is rarely in sync even from the factory. So much changes, draw length, pulling points poundage, d loop length and location onthe string. Timing always has to be checked and verified on any change you make.
@josephstanczak4340
7 ай бұрын
Camera dude needs to discover the zoom button for this video.
@huntsimple9527
Жыл бұрын
It was interesting that you did not measure A to A and brace after replacing the strings. I always like to see where I am at with regard to factory spec after replacing strings. My guess is you did not measure since you were purposely taking it out of spec to add some draw length? Hard to argue with the Deadlock Cam system on Bowtech, when that patent expires I am sure others will implement that ASAP. Thank you!
@the_sharp_carpenter
Жыл бұрын
Yeah, gaining that ½ draw length would make factory specs out a bit. Doing what he did changed AtoA, brace, increased draw weight, and changed holding weight percentage at the same cam setting.
@huntsimple9527
Жыл бұрын
@@the_sharp_carpenter For sure. All of that is OK, I was just expecting MFJJ to show us that and talk a bit more about it. I wonder if Bowtech would warranty that bow to an individual like you or me if we took it out of spec? I bet not.
@the_sharp_carpenter
Жыл бұрын
@@huntsimple9527 twisting cables and strings has been common for tuning since compound bows have been around. Some people intentionally take the cams out of time (top or bottom hitting ahead of the other) to gain small amounts of forgiveness for target setups. This just changes the timing and rollover point to gain draw length, shouldn't be an issue. I'd actually be interested to see how much length could be gained just maxing out the timelock adjustment.
@liamboyle9199
Жыл бұрын
Hold up, you put the laser on the side of the track and then induced lean? I would have thought default is to start with both running in a straight line?
@archerash6695
Жыл бұрын
Im not sure why Hamskea even sells the football rest cord dodad. The ez glide is the best and should be included with every rest they sell. I bought a bunch for the shop cause I don't trust the football clamp
@mojoe8005
Жыл бұрын
Can u make a vid on shooting at a level line for the rail for 1st axis
@BlueWidow2010
Жыл бұрын
Paige says that she makes her target bows aim the best that she can. Do you spend time doing similar stuff to your target bows to make them aim the best you can? If so would pass some of that goodness to us great follower's?
@bertcard2307
Жыл бұрын
The Green Machine!!!!!
@vancejohnson1778
Жыл бұрын
Hell ya mfjj! Hopefully that set up works great for u!
@graemehorn7523
Жыл бұрын
nice
@bmook019
Жыл бұрын
The redding bow would work welk wouldn't it?
@georgetorres6245
Жыл бұрын
How long does it take too do a bow build with out rushing 45 min 1hr
@ullikuschal8000
Жыл бұрын
Hey man do you have a linke to the "archer marks sight tape program"
@myronriggs9613
Жыл бұрын
I want that bow!
@georgetorres6245
Жыл бұрын
What’s the rust Mann you have time limit on this bow build
@ButcherBBQ
Жыл бұрын
What laser was you using for cam angles?
@brianklebowski243
Жыл бұрын
Spot hogg he sales them on his website
@Koudey
7 ай бұрын
What about Slop Hogg Swap?
@ghaugsness
Жыл бұрын
Which laser is Josh using?
@brianklebowski243
Жыл бұрын
Spot hogg he sales them on website
@davidgreer9567
Жыл бұрын
You know so much, and I appreciate your videos, but the camera guy never catches exactly what you're doing. Barely showed Dloop. It would be nice if it was up and close so we can learn how to do things.
@qvfireman158
Жыл бұрын
Thanks for doing these videos. Do you have a lighter?😂
@mojoe8005
Жыл бұрын
What laser do u use?
@shawnwoodhead9895
Жыл бұрын
Need Tim to be your camera man.
@blp1698
10 ай бұрын
I need this bow
@ericolds1410
Жыл бұрын
What stabs are you gonna run?
@RugerNuger
Жыл бұрын
Im really just not a fan of them new lca bow vises seems like a lot lf wobble amd play in them i like my opm morco adjust just seems like a much mkre stable and accurate system 🤷 other than that mr jj keep the content coming (maybe clean up that work area tho my ocd for mess and organizing was going insane 😅)
@JoshandTim
Жыл бұрын
BRo! What's it fixing to be like when I have to put a whooping on you with the same bow?! - tc
@justingarant9367
Жыл бұрын
What did the one lighter say to the other? I feel lighter today 🍩
@stanlong-rangepensionerman3363
Жыл бұрын
🇦🇺🇦🇺👍👍
@ronstein7369
Жыл бұрын
Great info. Thank you. BUT ... your Camera Man needs to 1) Focus the camera, and 2) focus on what your doing. ie) show the bow rest, tying your intial peep loop. NOT you.
@Kodyanderson402
Жыл бұрын
A little girly bow color but i guess when your the best shooter of the group you can do what you want haha just playin but loving the tech stuff!!!!
@waynestevenson9613
Жыл бұрын
MFJJ - confusing! please explain in detail cam alignment. Or do an in-depth explanation of laser alignment. kzitem.info/news/bejne/02htr4edsqReaqQ in that vid you aligned them at brace. And in this vid your aligning them at full draw. One way or the other it throws the cams off. Which way is correct?!?! It can’t be both!
Пікірлер: 105