This combination of adapters shorts together the left and right channels of the headphone output on the Rodecaster. You can probably get away with that, but there’s a potential to damage the headphone output that way. To do this safely, you’d need an external mixer to combine the left and right signals. Alternatively, you could just send right OR left to the iRig. The caller would still hear in both ears. It would be perfectly fine if all your other sources are mono, and probably good enough even if there’s some stereo background music.
@PodcastMeister
Жыл бұрын
Thank you for your comment! Alternatively one could use the Behringer MX400 instead of the dual mono to single mono adapter, as it is an external mixer that has a mono output. Nothing went wrong in my testings, but I’m also not an certified audio engineer, so if this is a concern, the MX400 will do the job an it also does not break the bank. Or Apple should just allow phone calls through the USB port. :)
@DavidJackson
Жыл бұрын
Thanks so much. I just wish they would've kept the TRRS cable.
@jason01095
Жыл бұрын
Great content and really awesome production value. Thank you for producing this video, it was really quite great! It reminded me of the days on an analog mixer where we had to build mix-minus solutions ourselves - which was good, because it really forced me to think through the signal chain and understand what was being routed where. RCP2 makes it so much easier these days, but your external analog solution to keep things wired up is something I can definitely appreciate. :)
@unquestionabletv
3 ай бұрын
It works with iPhone 15 via USB now I believe. It works with my iPhone 15 Pro for sure.
@LaloRacer1
Жыл бұрын
Brilliant solution1 Thank you!
@retrogemcollector
Жыл бұрын
Thank you so very much good sir. This was driving me nuts and even more so knowing that Roade added the TRRS to the Duo and I was out of the returning window. Anyways this worked wonderfully and I tested it with Facetime with no issue.
@PigTownSports
2 ай бұрын
I must be doing something wrong , when I try and record with my camera app , the audio sounds horrible
@djmaurozenidjmauz9834
9 ай бұрын
I would like to point out that I did the test with two different acoustic devices. The first time both devices connected perfectly, and the second Bluetooth symbol appeared next to the outgoing monitor symbol. I turned the rhodecaster pro II off and on again, both devices were no longer displayed among the devices and I was no longer able to connect them. I repeat, the first time they worked perfectly. What could I do to solve the problem? Thank you
@PurosandMusicPodcast
Ай бұрын
Thank you for making this helpful video!
@unquestionabletv
3 ай бұрын
Do you use a. Robot to record these animated type video transition things showing the hardware? It’s too perfect 😅
@coolermintmint
7 ай бұрын
sorry any idea why it's not working for me please? i've watched it many times and it's all set properly, brand new cables but i get no sound from the iphone
@mirojay-wh7mh
4 ай бұрын
I will try and see how bluetooth works for phone calls if possible and surely get back to your great info 👍🏼🙏🏼
@NinoAmerica
Жыл бұрын
I thought the headphone Jack had trrs? Or is that just the duo
@ConsumerTeamPete
Жыл бұрын
Although I’m way too lazy to do this, it’s amazing that you figured out this work around.
@MaxMilly_85
Жыл бұрын
im going to try this weekend thanks for this video (the only one I can find anywhere) I tried to do this with USB c to headphone and mic splitter on the USB 2output but it didn't work but in theory it should as the usb1 and usb2 are both input and output at the same time. ever try that or know why it wouldn't work??
@MaxMilly_85
Жыл бұрын
youre a lifesaver.this was the only info I could find anywhere on the web. i needed this to use game chat (xbox) through rcp2 and it worked the same way with the irig2. as far as I know you are the only one who figured out how to configure the headphone out as usable trrs outputs. thank you!!!
@flyryde
Жыл бұрын
I’m soooooooooooooooo grateful for this! Been searching for a year and finally we can use RCP2 for Twitter spaces while live-streaming on video, without losing quality (as happens with Bluetooth). Amazing 🙌
@michacatran9732
Жыл бұрын
Did it work? were you able to use the RCP2 for spaces - talk and also add live stream to the spaces?
@flyryde
Жыл бұрын
Just now tested and it does work great. There seems to be some little things to iron out with settings. It seems to have a tiny little pop sound every so often on the spaces recording. Not sure why or how to get rid of it.
@hakimbenchabane
6 ай бұрын
I've tried it it works perfectly and it's clear. So now i can get rid of the bluetooth that don't want ton connect automatically on the XSMAX when i receive a call. Thanks a lot.
@andreasdk
7 ай бұрын
Great video! Is there an easier setup now where iPhone 15 has USB-C connection?
@PodcastMeister
6 ай бұрын
Hi, I did not have the possibility to test it, but Røde keeps referring to an „iOS“ limitation, not a limitation in the connection type, so my best guess is unfortunately: no…
@djsequencer2356
8 ай бұрын
This really works 👊🏽 Thank You so much for this information 👍🏽👍🏽👍🏽
@BEDavisBrown
9 ай бұрын
I don't have the equipment to do this but I was able to follow your explanation pretty easy so your channel must have more subjects to help getting podcasts for newbie's off the ground.
@antoniofilipe70
Жыл бұрын
Congrats . very nice video. Can you make a video connecting the rodecaster Duo to a Iphone with new mix-min and this cable systme? Thnak you very much, keep the very good job
@PodcastMeister
Жыл бұрын
Hi, thanks! I could replicate this video using the RC Duo, but it would be just repeating myself, as the Duo will work exactly the same way as the Pro II, only you‘d use Channel 2 instead of Channel 4 and headphone port 2 instead of 4, as you only have two of both. The software settings are also the same, just set the submix for headphone output 2 instead of 4 and remove channel 2 from it instead of channel 4.
@antoniofilipe70
Жыл бұрын
@@PodcastMeister Thank . Yes the big diference is that now it have submix function
@johnospinag
11 ай бұрын
Hello! How do you connect your RCP2 directly to your camera?
@PodcastMeister
11 ай бұрын
Hi! I don‘t. Curtis Judd has a great video about it though, I suggest you check that out: kzitem.info/news/bejne/y41qvGqlsKdohn4si=VKciLxPDsL1lNOeA (from 2:00)
@nicktayloriv310
Жыл бұрын
Nice work Mister Meister! like I said before WHY you aren't 100k plus subs is beyond me! 👌🏽
@gregmashburn3073
Жыл бұрын
Wow! I had an iRig adapter gathering dust on the shelf, and; I have been fussing about not having a hard-wired phone connection to my RCPII. The Bluetooth connection just lacks a quality signal for my podcast. I followed your directions and had a hard-wired connection in less than 5 minutes that WORKS! Thanks so much!
@jacvanderspuy5618
Жыл бұрын
Great explanation. Thanks. Do you know whether an iphone can be connected to the streamer X?
@coolhxxs
Жыл бұрын
any idea if this solution could work with the Rose StreamerX ??
@Left-WingKingz
Жыл бұрын
Thanks to your great instruction I’ve got everything hooked up. I can hear the caller in my headphones but they can barely hear me on their phone. Either the sound from my mic isn’t going to the phone or the mic output is extremely low. When I record all audio inputs sound fine on my end. My concern is that the caller won’t be able to hear me. Any ideas what is going on and how I can fix this?
@Left-WingKingz
Жыл бұрын
Got it figured out. Had to turn up the headphone volume. Thanks for this great video.
@mathiassiebert1217
Жыл бұрын
@@Left-WingKingz Haha, same with me.
@foursite
Жыл бұрын
you are really good at this bro! learned a lot. i subscribed. Thanks so much!
@jacvanderspuy5618
Жыл бұрын
Amazing content and insight!!!
@michael_the_wicked
Жыл бұрын
Amazing
@mathiassiebert1217
Жыл бұрын
There are many YT videos that describe how to record with the iPhone via bluetooth. I tried that several times, but the voice of the called party sounded very strange each time. Much deeper than the original and artificial. But this one works so well that it's hard to believe. Looks a little funny, the tangle of cables on the table, but who cares: it does what it's supposed to. As far as I've searched and found, I can say this is the only video that has a workaround for this form of iPhone phone calls. Thanks alot. You saved me a lot of jobs with that. My alternative seemed to be buying an Android phone. As an Apple user for decades, it would have broken my heart.
@PodcastMeister
Жыл бұрын
Happy to hear that it helped you.
@mathiassiebert1217
Жыл бұрын
@@PodcastMeister Meanwhile I did 2 podcasts for my client and everything worked fine. I am so happy. Thanks again.
@koenignero
Жыл бұрын
How about the rodecaster duo which has a 3.5mm headset jack at the front ?
@PodcastMeister
Жыл бұрын
The 3.5mm headset jack unfortunately does not work the same way on the RC Duo as the TRRS port did on the original RCP: it is purely meant for headsets, albeit it does get its own channel. Nevertheless, since you have 2 combo inputs and 2 standard headphone ports on the Duo with the same custom routing and submixes options as on the RCP2, you can set it up on the Duo as well. Not 3x, only 1x as you need the other combo input for your mic - unless you are using the headset on the TRRS port as your own main mic and headphone, then you can use both combo jacks and headphone ports for this setup and you can then set it up twice.
@GoreGamer
Жыл бұрын
Why did you get this one over the Mackie DLZ Creator? I'm about to get one or the other.
@PodcastMeister
Жыл бұрын
Watch out for my next 2-3 videos, I‘ll tell you all about it. 😉
@GoreGamer
Жыл бұрын
@@PodcastMeister Will do! Subbed with Notos on. Love how deep you get into the configs on the RODECaster So far your the only one that I know of that goes this deep.
@PodcastMeister
Жыл бұрын
@@GoreGamer thanks, much appreciated!
@michaeld4502
Жыл бұрын
Will this work on pixel pro 7?
@PodcastMeister
Жыл бұрын
I don’t think you need this for the pixel pro 7 as you can just use the USB2 port to connect it to the RCP2 and record through there (the limitation is scepcifically mentioned for iOS, not for Android). Nonetheless, this setup should work with the Pixel Pro II as well, with a USB-C to 3.5mm dongle that helps connecting the iRig2 to the phone, as the iRig2 has a 3.5mm plug. I haven’t tested it though - but I have been testing it earlier with android phones and it worked there, so I see no reason why it shouldn’t.
@AngloSaxon1
Жыл бұрын
What a polava
@bellnaf
10 ай бұрын
Great video. This is no longer the with iPhone 15 and the new update from Rodecaster
@SamanthaPostmanSays
8 ай бұрын
Can you tell me more? I just got the pro 2 to find out this is insane with no mobile support. I have an iPhone 15. Could you get it to work with less cables?
@forumuberzone
7 ай бұрын
And So ? How can we make the iPhone 15 work wirelessly ?
@TheRealDickRulesBerlin
Жыл бұрын
Thank You that was definitely a piece of information that new Rode users most likely didn’t have. Will this still work just using A Bluetooth connection? And perhaps this may work again with the new iPhone 15Pros which hopefully will finally have USB C Thanks again best Regards Berlin , Germany 🇩🇪
@PodcastMeister
Жыл бұрын
Hi, the Bluetooth channel is not affected by this setup. You can record a phone call via Bluetooth as well (from another phone), parallel to this solution, as you have a built-in, selectable mix-minus routing for the Bluetooth output - for that you don’t need any of this. Let’s see if the USB-C version of the iPhone will support phone calls over the USB channel, although I wouldn’t put too much money on it… :)
@mathiassiebert1217
Жыл бұрын
I tried iPhone phonecalls with bluetooth. Not easy. Mostly the voices sounded like if I have used one of the alienation smart pads. But I didn't. Very strange. And not very stable. This cable-salad is great. And works.
Пікірлер: 58