Excellent tutorial, brings a whole new level in my progress learning Reaper. Thank you so much, Kenny.
@thewatchmanstudios6257
2 жыл бұрын
As always , really appreciate the tutorials Kenny
@audiosounddoctor5834
2 жыл бұрын
Thanks to you I am a reaper user now after using almost all other daw for many years and I do not regret it at all
@higltypig
2 жыл бұрын
for me this feature is massive because I use reaper to mix live shows with a control surface. I can now record the inputs but have tracks with FX going through the PA. It makes reaper the perfect live show powerhouse!
@AnthonyOrSmth
2 жыл бұрын
Great job Kenny, mans making a difference in the reaper community.
@rupertspencer6382
2 жыл бұрын
This was a great tutorial. I have not attempted to do this, but it would have taken me a long time to figure out what was going on with the sound and how to fix it.
@mageprometheus
2 жыл бұрын
Thank you. Kenny, you could take this a stage further and show the midi routing from a track to Kontakt then audio routing back from Kontact to the same midi track. The Kontakt track has the master send off, the project | Advanced | Allow feedback in routing is checked, and everything is sent pre-FX.
@dustins4022
6 ай бұрын
This is the tutorial I was looking for. Thank you, Kenny!
@deeskushun
2 жыл бұрын
as usual ,super helpful, thanks kenny
@daviHuggMonster
2 жыл бұрын
That is exactly what I wanted to learn in Reaper :) thanks Kenny
@grgwashnton23
2 жыл бұрын
thank you so much for this Kenny!
@davidraymusic3574
2 жыл бұрын
Awesome, great information and explanation
@cupboardhomestudio971
2 жыл бұрын
Thanks 1000 Kenny. 😉🎼👍🏽
@ZzKiD17
Жыл бұрын
WOW. what a trip to put a face to the magical voice! keep up the fantastic work Dude!
@banterbanter
2 жыл бұрын
Thanks as always 🍻
@jeremy_p
2 жыл бұрын
Once again, YOU ROCK!!!!!!!!
@mnpestudio
2 жыл бұрын
Good God! I've been looking for a video like this for a long time. I'm pretty new to Reaper, and as a Pro Tools user, I always record with FX on my tracks. I was trying to do the same thing with Reaper (I'm switching DAWs BTW) and I didn't know how to do this. Thank you so much for this. I really needed it
@santoshgujar5237
2 ай бұрын
✨Thank you, Sir, 🙏✨
@DaDrankKang
2 жыл бұрын
Great vid. I actually use this. I have a problem though. This stops me from using another DAW as a VST and doing this same thing in the video. I use the MPC software to make music then I export all the audio into reaper. I would like to use the MPC software as a VST but when I do the software audio skips when trying to do this. It seems as if my audio when im trying to record tracks jumps when i press record then it kicks in about a second after. Doesnt happen all the time but it does happen 1 out of 5 times. What can I do to stop this?
@davidmoore1056
2 жыл бұрын
Thanks Kenny...as usual, a great tutorial and very relevant. Could you please put together a tutorial on using ReaInsert? Many of us have old analogue and early digital rack effects which we would like to use as effects in Reaper...no one knows and understands Reaper like you do!!! Thanks for all the videos you have put out which help us all!!!
@ticeecit
2 жыл бұрын
Very nice!
@G_handle
2 жыл бұрын
Nice options. Is there a video for how to print/freeze all three pre fx, post fx, post effects and fader to separate Takes?
@harrisfrankou2368
2 жыл бұрын
Nice T Shirt!! But seriously... I see, I made a crazy beat in RMX with only the echoes/delays in different notes on 100%, had all the Masters off feeding into a track via aux sends and recorded as a wave...no I see why the levels were a bit off. Faders into Faders. Nice music like some I do.
@mikebeacom4883
2 жыл бұрын
Thanks- I need to record the signal generator plug-in’s output.
@MoreMeRecording
2 жыл бұрын
This rocked 👍 👍
@darrensmusicstudio
2 жыл бұрын
Awesome Kenny, Thank you!
@EmmanuelB
2 жыл бұрын
Very useful, thanks once again!
@VincentVegardSvart
2 жыл бұрын
It's perfect with all the midi drummer. I'm using EZD3. Thanks so much
@NowellValeri
2 жыл бұрын
Brilliant, thank you!!
@redwoodlloyd4320
Жыл бұрын
You’re a life saver
@JulianX3__
2 жыл бұрын
You should do a video on freezing tracks. That would rule.
@jaymac1355
2 жыл бұрын
thanks
@vexphoto
2 жыл бұрын
You da boss!!!
@japanairhome
6 ай бұрын
thanks!
@AndyCampbellMusic
2 жыл бұрын
Great.....
@oswsouza
2 жыл бұрын
Foi colocada a legenda em português. Agora sim... legal 😂😂😂👍🏻👍🏻👍🏻
@hristoistoyanov
2 жыл бұрын
Kenny, thanks for the video! My question goes back to WHY would one to go through the trouble of exploding a neatly compacted, single media track into a bloated multi tracks of individual drums? I think you demonstrated in a previous video how mixing, effects can be done on the channel level within a track? Alternatively, most midi drum vsts such as MODO drum already have a mixing console within, with individual effects. To me, exploding a single track into multiple ones is a step backwards... So please explain the WHY part better? Pros and cons? Again, this is for recording and mixing midi drums. I understand the use case for real drums with several mics, is different... Thanks again for this and all other videos!
@asator0505
2 жыл бұрын
i was wondering the same. although i can see why it is easier and maybe beneficial to your work flow to have everything ready in the mixer so that you dont have to open your plugin everytime. also: you can put different effects on the different tracks. sometimes i like to use a different compressor for the snare than i use for the kick and yeah, that way, i can easily do it and with plugins that arent native to my drum-plugin
@XxDarkXxXSasuxX
2 жыл бұрын
Well I'm not super advanced in mixing drums yet, but one of the first things that jumps at me is being able to do the same thing in different ways. But also, while perhaps you could use the mixing console within the drum plugin to do the majority of your drum work in isolation, what about sending individual drums to other tracks? For instance, if you want to sidechain compress another track using your hi-hats so that they cut through the mix better without the rest of your drums blasting everything out of context, you would need separated tracks, etc. It just offers up more options when everything is separated.
@REAPERMania
2 жыл бұрын
If you can get the sound you want in one track, go for it. Many people like a bit more control and a REAPER fader for each. It's not better. Just different.
@googlesucks1376
2 жыл бұрын
Might be a need to render out the audio tracks - pre fader and prefx to some other person and want them to use the samples you have. That way they get the raw drum sounds of your samples and not anything you were doing when doing your mix. Also might be instances where other systems don't handle MIDI - say someone that wants to mix solely out of the box and just uses a multitrack hard disk recorder thru a traditional console. Seems silly nowadays but I have clients that do it. It gives them that "warmth" of analog - tho they could just use Reaper and turn up the bass a bit...
@hristoistoyanov
2 жыл бұрын
The reason why I want Kenny to spend more time at the begining of these video gems explaining the why/pros/cons, is because there are lots of beginners that would do something just because "Kenny said so in video XXX", misusing Reaper, creating suboptimal, cluttered recordings.
@XxDarkXxXSasuxX
2 жыл бұрын
Awesome tutorial Kenny! I was wondering if there were any legitimate uses at all for non-latency compensated recordings. I could never think of any.
@REAPERMania
2 жыл бұрын
Probably not. But sometimes it doesn't matter. Like if you were creating a mix with it that you might export later.
@jimbeaux4988
2 жыл бұрын
Hmmm...I think this may solve a problem I've had where I could not freeze the drums to their channels properly. I'll just record them this way.
@gogomaniac4389
2 жыл бұрын
I had the same problem!! This video is seriously helpful
@roncoleman5007
7 ай бұрын
Hi Kenny, Great Tutorial as always.....but, just want to make sure I am understanding correctly......if i'm in the control room and I am tracking, I want to track the raw incoming audio to a track without any FX applied, but, from the mixing window I want to assign/apply FX as needed and control the output of the channel (fader) to the master in a monitoring arrangement.... acting as a split console in the analog world....(record raw data to the daw with the output of each track back into the console channel where i eq, compress...etc until I'm ready to print back to a track in the DAW.) Is this what you are describing?
@cornbone
Жыл бұрын
really helpful tutorial as always. but i noticed you have digital overhead and room mic tracks. how do you go about setting that up? I can't seem to find anything about it online
@1176hambone
2 жыл бұрын
yay!!!!
@Linguae_Music
2 жыл бұрын
OHHHHHHHHHH i always just went to the render window and selected "add file to current project" and then rerouted the new tracks where the old tracks went (drum buss usually) But this could save me a few moments of time ^~^
@nicolacisternino5054
2 жыл бұрын
Hi Kenny and thank YOU for all videos ! What's difference using track freezing (with FX: off) ?
@crancarenotafish
2 жыл бұрын
I think I followed the directions but I get nothing recorded from the output file.
@lmusik2417
2 жыл бұрын
⭐⭐⭐⭐⭐
@gordowebb9910
2 жыл бұрын
I realize this is off topic, but I've had Breaktweaker for two months and still haven't figured out how to record into Reaper. I setup the proper multichannel routing, but when I hit record, the Breaktweaker preset stops playing and I record 6 tracks of nothing. It's the most maddening thing I've ever experienced and customer service help is not available. Any help would be greatly appreciated.
@ericsolomon3318
Жыл бұрын
How would this work on say a mix bus or print track. Which option would be best?
@gogomaniac4389
2 жыл бұрын
Very good video kenny!! Thanks so much as always and also for the sonobus video!! This will rlly help with my drum mixing. Ah, i have another question kenny, im not as good as a guitarist as i think i am so i mess up a whole lot when i record, and coming from other apps, i always just ctrl-z the failed take away. However, the wav file of that take is still saved somewhere and it ends up flooding my storage!! I was wondering how to counter this..maybe i should just get better at guitar, but im sure ill have a failed take inevitably. Any tips?
@akaerik1
2 жыл бұрын
quick reaper question is there a tech support link that i din't see on the main page. I would prefer actual customer support as apposed to a forum that i don't have permission to ask questions yet so I'm left reading a thousand posts that might be similar to my problem
@REAPERMania
2 жыл бұрын
You can email them.
@akaerik1
2 жыл бұрын
@@REAPERMania 🙏thanks
@ARE_YOU_SICK_OF_YT_CENSORSHIP
2 жыл бұрын
there's no such thing as permission to post on the Cockos forum often an account isn't activated promptly enough, in which case you need to contact the administration two guys cannot do support for the entire user base, REAPER users help each other
@akaerik1
2 жыл бұрын
@@ARE_YOU_SICK_OF_YT_CENSORSHIP you're right I hadn't activated it properly
@olanrewajuadagba955
Жыл бұрын
Hello Kenny. I enjoy your ideo. This is my request, To send your channels from a Qu32 digital mixer to Reaper and send the master output of Reaper back to the Qu32?
@joeguitar75
Жыл бұрын
when I choose "latency compensated" my audio is earlier than the original MIDI. So this is only a way to mess up the timing of my project.
@nicodemesaintange4705
2 жыл бұрын
how to save all track as default for new projects in reaper
@etch4
Жыл бұрын
I didn't see that one coming. Output mode: post-FX, pre-fader. Am I the only one ?
@000jayakrishnan000
2 жыл бұрын
how to move selected region of an item downward or upward like Pro Tools in Reaper..🙂
@vasiliymelnikov590
2 жыл бұрын
Item edit: Move items/envelope points up one track/a bit Item edit: Move items/envelope points down one track/a bit
@000jayakrishnan000
2 жыл бұрын
@@vasiliymelnikov590 Thank you....but i don't want to move the item..i want to move just the selection
@ARE_YOU_SICK_OF_YT_CENSORSHIP
2 жыл бұрын
@@000jayakrishnan000 time selection is a different concept than selection in PT, in REAPER it's global to do it PT style you need to use Razor edit, create one then go Razor edit: Move areas up without contents Razor edit: Move areas down without contents
@PreachTMusic
2 ай бұрын
After recording the files to their respective tracks can you delete the parent track?
@REAPERMania
2 ай бұрын
You might want to save the MIDI but you don't really need to.
@PreachTMusic
2 ай бұрын
@@REAPERMania thank 😎 bro
@topiktopiktopiktopik2622
2 жыл бұрын
REAPER 6 No ! will add Please ( Piano Roll Keys ready note flashes ) YES FL STUDIO there is happy to do Пожалуйста REAPER 6 Нет! добавит Пожалуйста ( MIDI Piano Roll нота готовности Keys мигает !! ) YES FL STUDIO
Пікірлер: 77