Not much waste/campfire wood from those two! Good milling job. And all shines appeared to make it thru the day unscathed. Thanks for sharing and I'll be waiting for the next.
@IronOakSawmill
5 жыл бұрын
Thank you Barry. It's always a good day when everyone goes home uninjured. The customer isnt happy when they see a pile of scrap from their logs. Best to keep the waste to a minimum. Next up is Black Walnut. Same customer, different location.
@earlsmithson4749
5 жыл бұрын
Having watched several of your videos I really like your family work ethic. You my friend exemplify American Spirit.
@IronOakSawmill
5 жыл бұрын
Thank you Earl. Family is my number one priority. I'm glad we are able to share it with others. Thank you for stopping in.
@karencary3312
4 жыл бұрын
Beautiful stacks of wood. It helps having more assistance.
@IronOakSawmill
4 жыл бұрын
Hello Karen, and welcome to the mill. The customer was thrilled with the lumber. Thats always a good thing. LOL These 2 guys really knock it out. Saved a lot of work for sure.
@ralphking5428
2 жыл бұрын
I notice that with every start of the blade, you have a "chirp". I used to do that too. Then i figured out that to get those two big wheels and the blade into motion requires a lot of torque. Jerking the starting handle down puts all this force at one time on the wheels and belts. So I started just pulling slightly on the starting handle to get the momentum of the wheels turning, then pulling the handle all the way down eliminates the "chirp" and causes less stress on the belts. Just a half second delay, eliminated the "chirp." With a little practice, you won't notice any slow-down of your cutting, and the "chirp" is gone.
@IronOakSawmill
Жыл бұрын
Hello Ralph, and thank you for your input. I used to engage the blade slowly like you mentioned. Although my belt didn't stretch, it cause the belt to glaze, causing it to slip. No matter how I would adjust it, it would then slip, causing the blade to slow in the cut, in turn, causing it to dive. It made for a lot of wavey boards. I talked with Marty Parsons at PA Wood Mizer, while at a mill owners seminar. He agreed, and practices the style of blade engagement that we use. We have just over 900 hours on the mill, and just put our second belt on. So far, it's working for us. Maybe it's the belt quality or something. The larger mills have an electric clutch that engages the belt in the same manner. It locks up, and has a little chirp to it. 2 schools of thought I guess. As long as everyone is making good lumber. :)
@donaldtrabeaux1305
5 жыл бұрын
Very nice to have a great neighbor beautiful wood and Deb is the boss. Take care of your leg my friend y’all take care god bless from the 🇺🇸🇺🇸🦞🦞🐊🐊CAJUN 🐊🐊🦞🦞🇺🇸🇺🇸
@IronOakSawmill
5 жыл бұрын
Good neighbors are the best. Good to know you can count on them. The leg is feeling better. Hope to be 100% soon. Take care my friend.
@brandonkarhu5599
Жыл бұрын
That spruce stump is full of torsion, between that and the obvious decay that contributed to its failure. I’d hardly think the lumber would be worth the work. Also, spruce has a way of making everything sticky and gross lol. I’m no milling expert, but I work in trees for a living as a arborist
@IronOakSawmill
Жыл бұрын
Thank you for your input about the spruce. We actually ended up milling that log. It was still very solid and milled up great. Check out our video named Black Walnut Beauty. We show the lumber from that log. The client has used it successfully in many projects. Believe me, I hate spruce. The k ots are as dense as aluminum, and cause issues with the blades. Not to mention the sap pockets. I was surprised that this log didn't offer much of those issues.
@brandonkarhu5599
Жыл бұрын
Wow, that’s surprising. Pretty cool that it worked out. I’ll check out the video. Happy New Years
@singleshot2218
5 жыл бұрын
Beautiful lumber Chuck! You guys did a great job!
@IronOakSawmill
5 жыл бұрын
Thank you very much. We aim for the best quality.
@bryanwest1990
5 жыл бұрын
Great job alot of very nice boards !!
@IronOakSawmill
5 жыл бұрын
Thank you Bryan :)
@joelnickerson6739
5 жыл бұрын
I really enjoy watching you run your saw mill. I have an Amish gentleman who has a mill that cuts rough cut lumber. He's very responsible and I'm going to go there to get lumber for my workshop. It's just amazing to see you cut high quality lumber. Be safe.
@IronOakSawmill
5 жыл бұрын
Thank you Joel. I'm glad you have a good source for you lumber. Quality is rare it seems these days. Some still offer it. Thank you for stopping by.
@billwaldron9565
4 жыл бұрын
Ha man I finally got my mill ordered just like yours thanks for all your videos
@IronOakSawmill
4 жыл бұрын
That is great news Bill. You are going to really enjoy the LT35HD. I hope our videos helped. If you ever have any questions, or issues, let me know. I'd be glad to help out.
@sharonromer6606
4 жыл бұрын
Looks like the young man was enjoying the javelin throwing 👍
@IronOakSawmill
4 жыл бұрын
He was. What we really needed that day was a cool breeze. Cant see it in the video, but that was one, hot, humid day.
@thomashester739
5 жыл бұрын
Deb saved the blade on that one for sure. Great job!
@IronOakSawmill
5 жыл бұрын
Thank you. She sure did. She's my extra set of eyes on the mill.
@rrobertomondo5173
5 жыл бұрын
Nice wood, job well done. Deb's the best!
@IronOakSawmill
5 жыл бұрын
Thank you very much, and I will pass that on to Deb. She is awesome.
@jamesharless5357
5 жыл бұрын
Very nice, great job!
@IronOakSawmill
5 жыл бұрын
Thank you James, and thank you for checking in.
@johnpierce1251
4 жыл бұрын
Just a little helping hand they make power pack that can prevent camera dying it charges like a phone and when you get low plug it in and ten mote hrs of battery just trying to help out cuz your videos are awesome
@IronOakSawmill
4 жыл бұрын
I'll have to invest in one soon. We are shopping for a new camera. Hope the batteries last longer.
@larrykinder5353
3 жыл бұрын
Job well done.
@IronOakSawmill
3 жыл бұрын
Thank you Larry. It was a bit of work, but we managed to get it done.
@afj3rd
4 жыл бұрын
Please slow down the introduction.... Thank you for your videos, I really enjoy them!
@IronOakSawmill
4 жыл бұрын
I wish I could. The software i had at the time it gone. It crashed, and stopped working. The new software doesn't work on this older version, so i cant edit it. Thank you for letting me k ow. I'll continue to try. I may find a way to fix it yet.
@PutnmaKE
3 жыл бұрын
Kinda surprised that there is no interface to prevent the almost-oopsie at 44:00
@IronOakSawmill
3 жыл бұрын
Just more electronics that can fail, and shut you down, so we created a human interface. Much more reliable.
@debfromthemill6945
5 жыл бұрын
Deb Roger's Thank you all for watching the video. It's always a pleasure!
@NorthwestSawyer
5 жыл бұрын
No matching hair tie this time? ;-P
@debfromthemill6945
5 жыл бұрын
@@NorthwestSawyer I'll be sure to have one in next time. Lol
@MONNIEHOLT
5 жыл бұрын
Deb sure saved you a blade, that was well worth taking her out to dinner that night🏆
@IronOakSawmill
5 жыл бұрын
She sure did. She is my extra set of eyes while on the mill. I depend on her for sure. Thank you for checking us out.
@aporter701
4 жыл бұрын
Just watching the red oak video. I'm curious...what is the weight limit on the hydraulic system?🤔
@IronOakSawmill
4 жыл бұрын
The max log weight is listed at 4400 lbs. I assume this is the capacity of the loading arms.
@sharonromer6606
4 жыл бұрын
Ever notice Deb putting her hands on her hips...is she having back discomfort...wouldnt be bad if she wore a removable lumbar support.
@IronOakSawmill
4 жыл бұрын
No back problems. Thats just the way she stands.
@Prog27801
4 жыл бұрын
I can’t get over how strong the Hydraulics are on the LT 35
@IronOakSawmill
4 жыл бұрын
The arms will lift 4600 lbs, and the turner and clamp will handle it. Its work for them, but they get it done.
@rusticaio3119
3 жыл бұрын
Amo vocês.
@IronOakSawmill
3 жыл бұрын
Também te amo
@rusticaio3119
3 жыл бұрын
@@IronOakSawmill .aprendo muito com vocês
@jeremy2033
4 жыл бұрын
Where are you located at, i'd like to come spend a couple days working on a saw mill like this one Looks like a job in itself.
@IronOakSawmill
4 жыл бұрын
We are in southeastern PA. Even if you aren't close to us, I'm sure there is a mill close to you. Wood Mizer has a "Find a local Sawyer" network. Some are willing to let you assist with the days work. It's worth a look. Also, lots of sawmill groups on Facebook.
@howardanderson1310
5 жыл бұрын
Deb should let the guys do the work and she supervise.
@IronOakSawmill
5 жыл бұрын
That's exactly what I was telling her through the 2 way headsets. She is so used to working, it's hard for her to just watch. She hates just standing and watching.
@m8s4lif
4 жыл бұрын
@@IronOakSawmill Workers tend to work because it's just who they are. Watchers like to stand around because-----well. Hmmm. Anyway, you and your wife are both workers. You both deserve respect.
@IronOakSawmill
4 жыл бұрын
@@m8s4lif thank you very much. We've always believed in doing things ourselves. It brings a great deal of satisfaction.
@siyabongasangweni1002
2 жыл бұрын
How much is this machine?
@IronOakSawmill
2 жыл бұрын
It all depends on the options you chose. You can check this website, and price the machine you want. woodmizer.com/
@Prog27801
4 жыл бұрын
Was this across from the Pottstown airport?
@IronOakSawmill
4 жыл бұрын
Yes it was.
@aporter701
4 жыл бұрын
Those cuss-ed ants!!
@IronOakSawmill
4 жыл бұрын
They are a pain, thats for sure. We try to spray them when we can, to keep them from eating any more of the wood.
@aporter701
4 жыл бұрын
Just watching the red oak video. I'm curious...what is the weight limit on the hydraulic system?🤔
@IronOakSawmill
4 жыл бұрын
If i remember my machine specs correctly, I believe it's 4400 lbs.
Пікірлер: 67