Moral to the story,,, Never trust the thread lock Guy!!🤨😆
@rcilluminati26
2 ай бұрын
Haha!
@derekguenette6642
5 ай бұрын
I wouldn’t say that’s a RTR issue because I’ve never had any issues with my arma or my Traxxas RTR‘s
@rcilluminati26
5 ай бұрын
There were a lot of issues with the Sledge when it was first released and if you go back to first version Arrmas, same thing. I should say first release RTR. Most companies figure out the issues and correct them pretty quickly but that first shipment is def prone to issues.
@Fortes_RC_Adv
6 ай бұрын
Awesome Redcat👌❤️🔥
@The_RC_Guru
5 ай бұрын
Blue threadlock is a lifesaver. I don’t think enough people use it.
@paolo8768
3 ай бұрын
Which number of loctite do you prefer on rc cars?
@The_RC_Guru
3 ай бұрын
@@paolo8768 242-243. Just needs to be blue medium strength.
@jesseweed2144
Ай бұрын
i use finger nail paint for lock tight
@ConditionZero76
4 ай бұрын
Are those grub screws going into metal or plastic ? Because if it's screwing into plastic, the chemicals in thread locker will swell and melt plastics, which will cause big headaches in short order. If it's metal on metal, you're good to go 👍🏼
@rcilluminati26
4 ай бұрын
Metal, definitely need threadlock.
@ConditionZero76
4 ай бұрын
@@rcilluminati26 Cool, Thanks 👍🏼
@anthonyallen3680
Ай бұрын
I don't have the set screw in mine. I've checked all over these axles and there isn't one. Have they updated the axles in the past 4 months?😊
@rcilluminati26
Ай бұрын
Hmmm, maybe they finally updated them
@TomeOfKnowledge74
5 ай бұрын
Great video! Pretty amazing Redcat left all those screws un-Locktited. I only ran mine out of the box for about 15 minutes before doing this teardown. My front diff pinion screw was already slightly loose. I understand Redcat released a bulletin.
@rcilluminati26
5 ай бұрын
Yeah, hopefully they can get the factory to do more prep
@waynoo774
6 ай бұрын
My left front hub grub screw I can see blue lock tight but can’t see any on the right
@rcilluminati26
6 ай бұрын
Best to check all of it.
@arni7810
Ай бұрын
Awesome!!! Does the lexan 1/10 dodge power wagon shell fit this one?
@rcilluminati26
Ай бұрын
Haven’t tried it but I’d imagine it would be an easy fit aside as long as the front hinge pivot lines up.
@arni7810
Ай бұрын
@@rcilluminati26 oh nice!!!! Thanks
@bengonzalez5673
4 ай бұрын
is there a reason why Redcat decided to put a 2 piece pinion in there?
@ch-vs3fw
Ай бұрын
RedCat: Hi, would you like to buy our RTR truck? Me: it's ready to run? RedCat: totally, right AFTER you tear down the drivetrain, and thread lock all the metal to metal fasteners. Me: 🤔 I don't think RTR means what you think it means...
@rcilluminati26
Ай бұрын
lol. Rtr means ready to rebuild.
@trentgalloway
6 ай бұрын
Who owns a .5 driver geez!! Also, I don't see the video for the ESC programming in your vids lineup.
@rcilluminati26
6 ай бұрын
lol. Better get one! Sometimes it takes while to appear but should be up
@TomeOfKnowledge74
5 ай бұрын
It's a .050" (inch) driver. They're common with the micro crawlers.
@OkieDokieBoi
6 ай бұрын
I run the greens, and they still feel firm in these tires.
@rcilluminati26
6 ай бұрын
I just switched to greens. Will give it a shot. Definitely stiffer than antifoams I run in my other crawler that weighs the same.
@OkieDokieBoi
6 ай бұрын
@rcilluminati26 yes, indeed. The carcass of these tires are really thick, as well, tho. I've noticed the Injora silicones are also really tight in them in height. Being that the Ruptures are a bit taller, I think the silicones will be perfecto in them, so I'm going to switch the tires out in the next week or so. I absolutely love the blues in my 9-10 pound FMS Blazer. I love that trail rig, and it is very capable with just the wheel switch and brass rings in the fronts with the blue silicones.
@TomeOfKnowledge74
5 ай бұрын
I like the greens in my rig, combined with the knockoff Hyrax clones. They conform well, and I'm not having issues with sidehilling. I'll see how they perform as they wear in more.
@OkieDokieBoi
5 ай бұрын
@@TomeOfKnowledge74 I have now mounted Ruptures to the stock beadlocks with soft Anti-Foams in rear and Injora greens up front for a tad more weight bias and it is golden now.
Пікірлер: 33