I really felt it when he plugged in that keyboard. It reminded me the marbly sound of the tacobell countertop
@vagabondcaleb8915
Жыл бұрын
Sounds like marbles raining on a rubber roof top with foam shingles. Very bouncy sounding. Super interesting. I swear something about the sound reminds me of Box Jades..
@lunaborad6600
Жыл бұрын
yea i also have the saem feeling at first ngl
@brocksi8304
Жыл бұрын
It’s the new king of thock
@-seoulair
Жыл бұрын
Pretty thoccy
@calebdume6557
Жыл бұрын
This sounds amazing I want this sound signature. I am planning on using these switches for my 1st build. How do you think these switches with gamakay ck61 and foam and tape layer
@lunaborad6600
Жыл бұрын
it going to be somewhere around thock if it put together carefully and it going to sound great :D
@PatRose
Жыл бұрын
Do you steel use this? How is it holding up? I'm think about doing the same build
@lunaborad6600
Жыл бұрын
It still going good I used it for typing and gaming depending on the mood
@vincentli4751
Жыл бұрын
what kind of switch opener do you need for akko switches and is it instantly compatible with the k617 or do you have to cut some things
@vincentli4751
Жыл бұрын
pls reply
@lunaborad6600
Жыл бұрын
Hi I was on a plane but no you don't need to cut akko switches to fit. And you should get a 2 in 1 switch opener for better it like only 3$
@vincentli4751
Жыл бұрын
@@lunaborad6600 ok tysm
@Forgetfulmuichir0
Жыл бұрын
When u want a poppy keyboard:
@vitobius607
Жыл бұрын
oWo...im planning to mod this(my first mech keyboard) Imma do Eva foam/krytox 205g0/maybe a tempest mod;(I'm kinda afraid of this one) on the outemu red...and later look to switch to a akko cs jelly(I think I might be more of a tactile person)...I'll do keycaps last,I really wanna enjoy the RGB lighting through the keycaps for a while and I like the stock feel tbh so far
@vitobius607
Жыл бұрын
Got any tips on removing those pesky stock switches;they are really in there..
@lunaborad6600
Жыл бұрын
@Vitobius I just pull them by yeating my hand but maybe adding pressure 1 by 1 should do
@charlielin2514
Жыл бұрын
@Vitobius you don't got a switch puller?
@CaitJohnelledSeo
Жыл бұрын
Are the switches Akko black switches only or Akko CS Jelly Black
@lunaborad6600
Жыл бұрын
Akko cs jelly black
@JasonYT2024
Жыл бұрын
Yo we got the same Keyboard and Switches and Keycaps ig??
@roshwyinstaicoon2593
Жыл бұрын
Replacing my K552 switches for these switches. Is it a good switch?
@lunaborad6600
Жыл бұрын
It a Farley smooth switch but for the k552 it going to sound alot high pitch so clack but keep in mine that the cherry profile keycaps might run into some interface with the switch
@Lewis_football7
Жыл бұрын
k so i am bout make the same build but should i choose akko jelly black switches or gateron milky yellow pro... I want smth really thocky and creamy..idk which one to choose
@lunaborad6600
Жыл бұрын
You can go with the jelly if you want to put it with this board but if ur going with something beside akko then it won't fit into the hotswap socket that redragons offers. You wanna like cut each pins to make it fit outemu socket. But from what I experience both switch are good. It just come down to the build of the board and keycaps
@Lewis_football7
Жыл бұрын
k ig i will go with the jelly blacks....and can you recommend me a good keycap i was about to buy the coral sea but i heard their quality is really bad....and i need one which is kinda cheap but good.
@Lewis_football7
Жыл бұрын
*a xda profile keycap.
@Lewis_football7
Жыл бұрын
and one last question....which lube did you use for stabilizers and for switches.
@lunaborad6600
Жыл бұрын
@@Lewis_football7 krytox 205g0
@Pickle_soup121
Жыл бұрын
Pls reply does the banana split switch work on that 100% exact sound on that keyboard
@lunaborad6600
Жыл бұрын
For that I'm not sure sorry because I haven't tried it with this bored yet
@Pickle_soup121
Жыл бұрын
@@lunaborad6600 oh cause that black switch is sold out 😭😭 but like I heard banana split one is also good one that
@WalkerOnYT
Ай бұрын
does the jelly black switches fit perfectly?
@lunaborad6600
Ай бұрын
It a bit tight but it not to the point where something is going to break
@aussiekai
Жыл бұрын
you should have gotten the akko matcha greens, they are better in my opinion as they sound thoccy and creamy.
@lunaborad6600
Жыл бұрын
Personally matcha green is not my favorite. It a good switch but didn't do it for me
@SumTheCat
Жыл бұрын
ok need help with the stabs one side of the spacebar sound rattly i did holee mod and lube
@lunaborad6600
Жыл бұрын
Maybe need some balancing because it might be bend
@SumTheCat
Жыл бұрын
@@lunaborad6600 its balanced
@SumTheCat
Жыл бұрын
@@lunaborad6600 i placed it on my phone screen
@mfarisazman2233
Жыл бұрын
Hey man i got question can this plate on keyboard be.changes
@lunaborad6600
Жыл бұрын
Sadly no the plate is integrated to the case
@mfarisazman2233
Жыл бұрын
I see thank man
@manicman7489
Жыл бұрын
What kind of foam in case and how thicc?
@lunaborad6600
Жыл бұрын
Sorry for the very late reply but I use a thin pe foam
@ItzDudd
Жыл бұрын
Are these prelubed or handlubed?
@lunaborad6600
Жыл бұрын
Yes hand lube
@hieramvillaranteavi2856
Жыл бұрын
how much did the mods cost?
@lunaborad6600
Жыл бұрын
The board cost me 21$ so adding the switch 12$ 1 box, krytox 10$, foam 5$ and keycap cost 35 so total come to around 4x ish or 50 because I spend about 10$ more on equipment
@ShubhamPednekarYt
Жыл бұрын
What is that sound when u connect USB 🤣
@lunaborad6600
Жыл бұрын
Master piece of song
@vagabondcaleb8915
Жыл бұрын
I think that was him blowing out his birthday candles.
@SumTheCat
Жыл бұрын
what type of foam do you use
@lunaborad6600
Жыл бұрын
Thin p.e foam
@SumTheCat
Жыл бұрын
@@lunaborad6600 ty
@qxvnormal
Жыл бұрын
Yo any tips on how to get the switches out they are so hard to pull out?
@lunaborad6600
Жыл бұрын
My experience I just yeet them out 🤣🤣 but maybe adding force 1 by 1 should do the job
@qxvnormal
Жыл бұрын
@@lunaborad6600 at first I tried adding alot of force but I got a lil scared cause I thought that I might break those switch compartment or idk what to call em
@lunaborad6600
Жыл бұрын
@@qxvnormal it fine for me but I am not sure for other model
@qxvnormal
Жыл бұрын
@@lunaborad6600 oh ok, I think we have the same model redragon k617 grey variant
@lunaborad6600
Жыл бұрын
@shreyas mine is pink variant but I think every one of them are manufactured not the same like one is easy to mode and the other is hard so it not well made
@nathhval
Жыл бұрын
Im planning also to get an Akko switch, is this better than outemu? My k617 is having an issue with the switches where i have to double press some keys just to respond but it can get fixed by replacing it with the extra outemu switch. Will this akko switch last long?
@lunaborad6600
Жыл бұрын
for what i have experience i been using akko for about 2 years now and they havent fail yet so i would say yes go for akko switches
@nathhval
Жыл бұрын
@@lunaborad6600 Oh i see, ill go get it then. Thanks!
@lunaborad6600
Жыл бұрын
@@nathhval np man thanks for coming to my channel much love
@Musfn
Жыл бұрын
I can do any switch i want ? Like akko silver ?
@lunaborad6600
Жыл бұрын
For now I could say yes akko is the safest option for outemu socket because the pin are thin. Something like geteron or cherry won't fit the slot saldy
@mayortomsoy
2 жыл бұрын
Differences between Jelly black and outemu red? Nice video
@lunaborad6600
2 жыл бұрын
The difference between them is alot tbh. For the outemu to become jelly you need to lube and film them to become a stock jelly. But for jelly is a much smoother experience stock and only make differences in sound when lube. Jelly also don't need to be film due to how tight the stem is but outemu even with film still make some stem wobble.
@mayortomsoy
2 жыл бұрын
@@lunaborad6600 tysm I have 2 k630 one of them with Redragon (outemu) red. I bought jelly blacks but idk if it's close the same...
@manicman7489
Жыл бұрын
@@lunaborad6600 What kind of foam in case and how thicc?
@lunaborad6600
Жыл бұрын
@@manicman7489 just normol pe foam and it about 2 or 3 cm thick
@manicman7489
Жыл бұрын
@@lunaborad6600 ty
@IamNotNafisSuperBG
Жыл бұрын
I am going to buy this is it a good option or E-yooso Z686
@lunaborad6600
Жыл бұрын
If you need an arrow key then go for the e yooso but if you don't need thr arrow keys then thr redragon shall do the job done
@IamNotNafisSuperBG
Жыл бұрын
@@lunaborad6600 but redragon also have a arrow key on WASD
@lunaborad6600
Жыл бұрын
@@IamNotNafisSuperBG even they do you have to press a key to activate it. and iot could get annoying sometime
@lunaborad6600
Жыл бұрын
i also never use arrow key that much so it not my problem
@IamNotNafisSuperBG
Жыл бұрын
@@lunaborad6600 oh so if I can avoid arrow keys should I go for Redragon then?
@jajak6634
Жыл бұрын
Can I ask are Holly pandas OK?
@lunaborad6600
Жыл бұрын
no sorry they not but if feker holy panda then it ok
@sreehari5423
Жыл бұрын
how do they sound unlubed?
@lunaborad6600
Жыл бұрын
my mic dont pic up the sound but it feel more better due to the spring not having ping and the smoothest only increase by a bit
@sreehari5423
Жыл бұрын
@@lunaborad6600 oh ok thanks for replying!
@lunaborad6600
Жыл бұрын
@@sreehari5423 np
@Phillip12131
Жыл бұрын
0:30 fart break
@Drizzyfn.
Жыл бұрын
does it sound like this in real life
@lunaborad6600
Жыл бұрын
Yes
@Drizzyfn.
Жыл бұрын
@@lunaborad6600 really ?? this deep?
@Drizzyfn.
Жыл бұрын
@@lunaborad6600 would it sound good with no lube
@lunaborad6600
Жыл бұрын
@Drizzy if molded correctly and spending multiple hours for the right tone then yes
@HoustoneToMyBonez
Жыл бұрын
I got the same keyboard with akko jelly blacks I originaly didnt like it cuz the the switches and the skrews were TIGHT IN THERE
@lunaborad6600
Жыл бұрын
It really depend on different board because mine wasn't bad to work with
@HoustoneToMyBonez
Жыл бұрын
@@lunaborad6600 Ik but I looked at the reviews on amazon and everyone had the same problem u just got lucky ngl
@lunaborad6600
Жыл бұрын
@@HoustoneToMyBonez idk I don't have that problem luckily
@G-why
Жыл бұрын
Idk i heard fard
@-1nfinite
Жыл бұрын
idk if one can hear it but i can hear some pinging
@lunaborad6600
Жыл бұрын
there is pinging but i fix it already
@Lewis_football7
10 ай бұрын
@@lunaborad6600 how
@lunaborad6600
10 ай бұрын
@zaviar8294 sometime the spring do not get lube well and as you can see with this I was in a hurry and my work was trash
@ralphsantiago850
Жыл бұрын
what was that sound? 0:33
@lunaborad6600
Жыл бұрын
Uhh...my brother in the background:))))
@anshumanazad836
Жыл бұрын
0:34 💀
@lunaborad6600
Жыл бұрын
I forgot I have the usb plug in sound change and so I just let it slide 💀
@Radicaldude
2 жыл бұрын
are these hand lubed or factory lubed?
@lunaborad6600
2 жыл бұрын
Hand lube
@sidrasohail2427
Жыл бұрын
Is it really this thocky I saw some other reviews but it tottaly didn't sound like this... It sounded way more clacky
@lunaborad6600
Жыл бұрын
Yes it is but for me to have this sound I have to play around so many time to actives this
@Lewis_football7
10 ай бұрын
@@lunaborad6600 wdym by activating it like how do u activate it
@lunaborad6600
10 ай бұрын
@@Lewis_football7 activating=achieving?
@brocksi8304
Жыл бұрын
Witch mods did you use on this keyboard
@lunaborad6600
Жыл бұрын
I use thick foam for under case and plus one thin pe foam for pcb with also tape mod
@brocksi8304
Жыл бұрын
Ok thank so muchhhhhh
@lunaborad6600
Жыл бұрын
@@brocksi8304 np brother thank you very much for coming
@brocksi8304
Жыл бұрын
And just one last question how many layers tape is on the keyboard
@lunaborad6600
Жыл бұрын
@@brocksi8304 about 2 only because if I put 3 of 4 the switch would just pop when I try to screw it in
Пікірлер: 125