"Never trust anyone trust yourself" , i feel exactly the same. Great videos bro, new subscriber here keep up the good work!!
@Cscrefandhvac
6 жыл бұрын
HVACR VIDEOS hey man thanks for watching and appreciate it 👍
@drifter436
6 жыл бұрын
Nice clean install. You are right about always checking everything, I learned that the hard way. Great video.
@HVACRSurvival
6 жыл бұрын
Good tip on marking the txv stem, some of those txvs never seem to stabilize. I have the same Cooper thermometer, very accurate at .3deg can't beat it. Your 110% correct on double checking other people's work, even the factory. If it can go wrong, it will. Great video keep them rolling. It seams the techs that really love what they do are willing to help others. There was way too many insecure guys the field when I started, no help form most of them.
@Cscrefandhvac
6 жыл бұрын
UcantStopThis1 HVAC Videos hey man thanks for watching. Yes I was taught years ago to mark the stem , helps for sure . Yes I’m just trying to share some knowledge. I don’t know everything that’s for sure. We all learn everyday
@HVACRSurvival
6 жыл бұрын
CSC Refrigeration and Hvac I've always learned there's always someone smarter always someone faster but I always try to do it in my absolute best.
@Cscrefandhvac
6 жыл бұрын
UcantStopThis1 HVAC Videos me as well
@furnacetech2581
6 жыл бұрын
Great advice to check everything yourself!
@cjlosangeles6045
3 ай бұрын
thank you I just installed one of these and I had the same issue. I couldn’t figure out the leak. You saved me 🙏😩
@centerb541
6 жыл бұрын
I’m new to the trade, but good call on checking new units or equipment. I got a new set of manifold gauges and they started leaking up by the handle on the high side. Tightened up the nut and they worked great afterwards. Love the videos man, very informative, keep it up.
@Cscrefandhvac
6 жыл бұрын
KuatoLives hey man thanks for watching and glad you enjoy. Hope you are liking the business
@sarb416
5 жыл бұрын
Excellent Video !!! Clean job, very informative !!!
@Cscrefandhvac
5 жыл бұрын
Sarbjit Panesar thank you
@RayRay-nb7tn
5 жыл бұрын
I like that video. Explained everything and was very excited. Good ole Boston.
@Cscrefandhvac
5 жыл бұрын
Ray Ray thanks for watching man
@JuanTodoli
6 жыл бұрын
The more videos I watch, the more I like your channel Chris. Keep on this excellent work & thanks for taking time to film, not always is easy (or permited).
@Cscrefandhvac
6 жыл бұрын
Juan Todolí thank you Juan ! I’m glad your enjoying man , that awesome 👍
@miguelv431
5 жыл бұрын
I graduated last week from an hvac school in Lowell mass so i have a lot to learn
@Cscrefandhvac
5 жыл бұрын
Miguel Villa hey man. Congrats
@miguelv431
5 жыл бұрын
Thanks
@jmrhvac4542
6 жыл бұрын
Nice job on the install nice and neat I like your style of work it's all about the details
@tonyp6088
5 ай бұрын
Good driver cam angle. 🍻
@FireandFrostHVAC
6 жыл бұрын
Hey, I learned a new trick today, thanks! I really like the idea of marking one face of the TX valve stem to make your turn count go easier, gonna try that on my next job.
@Cscrefandhvac
6 жыл бұрын
404 Refrigeration awesome man ! Yes I’ve been marking them for years. Otherwise I’d lose count. Hahahah
@mitchellcowan945
3 жыл бұрын
Since that was a TXV why was u checking superheat?
@geckohvac3935
6 жыл бұрын
nice work buddy and keep em coming😃
@cursed_to_toil
3 жыл бұрын
Cooper Thermos are where its at. It is all we used on Dairy Refer
@sterlingarcher46
4 жыл бұрын
Very neat job , always great tips and advice 👍👍👍
@AKHVAC
6 жыл бұрын
Can't agree enough. Never trust that the factory has everything buttoned up tight!
@Cscrefandhvac
6 жыл бұрын
Absolutely
@refrigerationtechnology7858
5 жыл бұрын
Learn a lot from your refrigeration vids Thanks
@Cscrefandhvac
5 жыл бұрын
Refrigeration Technology thanks man I appreciate that
@20antman
6 жыл бұрын
I just put the same style condenser in but for a walk in freezer. You mentioned the old condenser was bigger. Did it have a semihermetic recip. comp in it? Them babies run for ever. Now a days customers are on a budget and go for the tin can compressors. But with the right work the tin cans last a long time as well. But nothing like the semi hermetic.
@Cscrefandhvac
6 жыл бұрын
Anthony Reardon hvacr hey man , no the old unit had a hermetic as well
@notanewbie1718
5 жыл бұрын
There should be a better way than treated 4x4's to support those units, think?
@Cscrefandhvac
5 жыл бұрын
nota newbie probably but I’ve ways had good luck with them. It also depends what the customer wants to pay for
@MRICE-qe4sv
6 жыл бұрын
Just subscribed. Been enjoying the videos. Good tip on marking txv stem. If you did not have the wires to the condensing unit to break the tstat leg would you have mounted defrost inside at evaporator or do you ever just off cycle the condenser breaking a leg of contractor coil? Seen both ways.
@Cscrefandhvac
6 жыл бұрын
MR. ICE hey man thanks for watching. Yes I would take the power from the evap downstairs and mount clock in the box and break the wire to Tstat and solenoid inside the box. Also yes , you can just break the leg to the contactor on the roof but when a solenoid is in the system it won’t be able to pump down if you just broke the leg to the contactor coil . Thanks for watching man 👍
@MrEltinieblas
5 жыл бұрын
Excellent work. Would you please explain the steps taken to start condenser up? Do you add refrigerant to the low side first? If so, how much? Etc, thanks 🙏
@RayRay-nb7tn
5 жыл бұрын
You are very welcome.
@goldhammer561
6 жыл бұрын
Great video
@leonbogon148
5 жыл бұрын
nice job
@gurcanemekdurmus6975
4 жыл бұрын
condensing unit musical note B♭
@sincityhvacr
6 жыл бұрын
new to ur chanel great video man
@Cscrefandhvac
6 жыл бұрын
C&H GUY awesome man , welcome ! Thanks for watching , glad you enjoyed 👍
@TheJakenesbit
6 жыл бұрын
hey csc would you bother with four valve manifolds or just stick with 2 valves?
@Cscrefandhvac
6 жыл бұрын
Jacob Nesbit hey man I’ve always had the 2 valve ones. Never had the 4 valve. I’ve used the 4 valve before. I find the manifold is too big for what I like , I just used shut off valves on my hoses that you can buy separately .
@RayRay-nb7tn
5 жыл бұрын
I would go 4 valve
@miguelv431
5 жыл бұрын
Nice job
@Cscrefandhvac
5 жыл бұрын
Miguel Villa thanks for watching
@SeanMackBuffaloStyle
6 жыл бұрын
Wtf rotolock blows. Why can't they go sweat on all components. Nice work
@Cscrefandhvac
6 жыл бұрын
Sean Mackiewicz thanks man !
@DW-bo3qw
5 жыл бұрын
Hey just was the old condensing unit r22 if so did you change the nozzle in the distributor because the r22 nozzle is different from the rest?
@Cscrefandhvac
5 жыл бұрын
D W yes I did put a new nozzle In when I installed the new txv
@xraybravo7180
4 жыл бұрын
I have a questions, on 6:28 you said for compressor you need 25 to 30F of super heat is that right ?
@Cscrefandhvac
4 жыл бұрын
XRAY Bravo yes
@mustaphaennajem6078
5 жыл бұрын
Hi i am a new subscriber High superheat could mean low charge and by adding refrigerant y lower the superheat I may be wrong Please correct me
@Cscrefandhvac
5 жыл бұрын
Mustapha Ennajem yes if you don’t have a correct charge the superheat will not be right
@earthling94
6 жыл бұрын
You can NEVER trust the factory...
@Cscrefandhvac
6 жыл бұрын
For sure man. Thanks for watching !
@Ohsnaapp
5 жыл бұрын
Is it normal for the evap end loops and distribution tubes to be froze up? I’m new to the walk-in cooler/freezer work.
@Cscrefandhvac
5 жыл бұрын
The9oh3Rider it can be ok if they have some frost at times but they should not be a block of ice . Freezers the tubes will get frosty but shouldn’t be frozen solid
@Ohsnaapp
5 жыл бұрын
CSC Refrigeration and Hvac okay. That’s what I am seeing. It’s not a block of ice. Thanks man. I’m still learning so I’m sure I’ll ask more questions haha
@Cscrefandhvac
5 жыл бұрын
The9oh3Rider no prob man. Thanks for watching 👍
@sarb416
5 жыл бұрын
Excellent Video !!! Clean job, very informative !!!
Пікірлер: 65