*Thank you ALL so much for watching!* Leave me a comment on _whether or not you like this new focused format,_ going back to my roots!
@stevespringer8385
5 ай бұрын
Wish I could add multiple "likes" for this one Rich. Thanks so much.
@TheLouisianaHobbyGuy
5 ай бұрын
Wow, thanks Steve! 👍 I appreciate the support!
@stevespringer8385
5 ай бұрын
@@TheLouisianaHobbyGuy always Rich
@cousinamia
5 ай бұрын
I used the raised lettering in braille language to create a Keychain for a blind friend . He loved it
@TheLouisianaHobbyGuy
5 ай бұрын
Awesome! 👍 Thanks for watching!
@ggwarrier
3 ай бұрын
I have some terrific pencil sketches drawn by my 12 year son on regular paper. I am going try this method to accentuate these priceless(for me) art work on to playwood using my first and newly acquired laser unit (Ginmetsu L8). I watch lots of your videos but this one focused on techniques can't be beat. Thank you, Sir. Genius....
@TheLouisianaHobbyGuy
3 ай бұрын
Wonderful!
@linwoodhenson7270
23 күн бұрын
Wow, this really shows what creativity + laser can do. I really learn a lot from your videos. Thanks for sharing.
@TheLouisianaHobbyGuy
22 күн бұрын
My pleasure!
@andrewvincent487
16 күн бұрын
Excellent. ..made some coins and they turned out absolutely great.
@TheLouisianaHobbyGuy
15 күн бұрын
Excellent Andrew!
@adamcolville2057
2 ай бұрын
Just stumbled across this video Rich , once again you’ve made it easy to understand and I’ll be trying this out very soon . You sir are a lightburn Master , and a thoroughly nice chap as well .
@TheLouisianaHobbyGuy
2 ай бұрын
Wow! Thank you so much! I appreciate the comments Adam! 🙏
@bg4371
2 ай бұрын
Smooth Narrating Well Done Easy To Follow Thanks
@TheLouisianaHobbyGuy
2 ай бұрын
Glad you enjoyed it!
@rjford
4 ай бұрын
Great. Hope to see lots more videos like this. Richard....
@TheLouisianaHobbyGuy
4 ай бұрын
Thanks, will do!
@sicciful
5 ай бұрын
Thank you Rich for this educational video, you always learn from the master himself. thankx
@TheLouisianaHobbyGuy
5 ай бұрын
My pleasure! Thanks for watching!
@Essentialvideophoto
5 ай бұрын
Hello Sir. Thank you for your to the point videos. Short and on subject. Love it.🧐👋
@TheLouisianaHobbyGuy
5 ай бұрын
You are very welcome!
@akbadwolf
5 ай бұрын
SWEET! I had been stumped on a mothers day heart with words and it did not look real good. This method is perfect. Thanks
@TheLouisianaHobbyGuy
5 ай бұрын
Wonderful!
@jimcarris3258
5 ай бұрын
always amazed by your knowledge, I dont use my laser enough because I can never do what I want to. You make things possible.
@TheLouisianaHobbyGuy
5 ай бұрын
You can do it Jim, thanks!
@guardtroll4829
5 ай бұрын
I love that your videos give detailed focus on the LB tools and techniques you can do with them. It really helps to imagine their application for my own designs.❤
@TheLouisianaHobbyGuy
5 ай бұрын
Awesome! 👍 Thanks for watching!
@Arcottocra
2 ай бұрын
Brilliant video tutorial! Many many thanks.
@TheLouisianaHobbyGuy
2 ай бұрын
Awesome! 👍 Thanks for watching!
@nelsonmuniz9530
3 ай бұрын
Thank you very much you just gave me a great idea to engrave on a blank coin to engrave and didn’t know how to start. You make it look so easy. Thanks again.
@TheLouisianaHobbyGuy
3 ай бұрын
Glad I could help Nelson!
@user-jz8fo6vc7m
5 ай бұрын
Just a Great educational video, Thanks So Much , I learn so much from You !!
@TheLouisianaHobbyGuy
5 ай бұрын
Glad to hear it, thanks!
@channettecoetzee8827
5 ай бұрын
Thank you. You are an inspiration to me
@TheLouisianaHobbyGuy
5 ай бұрын
You are so welcome Channette!
@pacobalbuena
4 ай бұрын
Gracias, Saludos desde España
@TheLouisianaHobbyGuy
4 ай бұрын
You're welcome!
@Joe135Boomer
5 ай бұрын
Once again a great big thank you. You pick topics that really help me. This video will be in my permanent library for continuous reference. I’ve had some success with the raised lettering but when I and more layers everything goes haywire. Now I see where I have been goin wrong. Again, THANKS.
@TheLouisianaHobbyGuy
5 ай бұрын
Glad it was helpful Joe!
@createinspain
5 ай бұрын
Great video! The bit I wanted was the engrave setting tips. I'm lucky in that I have been designing vectors for years, so Lightburn holds few problems for me in that respect.
@TheLouisianaHobbyGuy
5 ай бұрын
Glad it was helpful!
@nipajhaveri434
5 ай бұрын
Wondered how that was done. Thanks for the video. May have to watch it a few times. 😊
@TheLouisianaHobbyGuy
5 ай бұрын
Glad it was helpful Nipa! 👍 Follow along in your copy of Lightburn.
@grandviewfarmer1994
5 ай бұрын
I had stop watching your videos but I've just sat through two awesome instructional videos hope you keep these up great job. 👍🏻
@TheLouisianaHobbyGuy
5 ай бұрын
Thanks, will do!
@elguapo1507
5 ай бұрын
Thanks
@TheLouisianaHobbyGuy
5 ай бұрын
Thanks so much for the support! 🙏 Much appreciated!
@stevewoodrich5130
4 ай бұрын
As usual great video.
@TheLouisianaHobbyGuy
4 ай бұрын
Thanks again Steve!
@williemoses9394
5 ай бұрын
This was amazing! My wooden coaster have bothered me with the grain direction for larger spaces. I bet the tip for cross hatch will make a big difference for me with these. I really enjoy your videos.
@TheLouisianaHobbyGuy
5 ай бұрын
Glad it was helpful Willie!
@BW-xz6ol
3 ай бұрын
Thanks
@TheLouisianaHobbyGuy
3 ай бұрын
Welcome!
@johndiego3105
5 ай бұрын
Oh Wow, that is extremely nice!! I’m gonna have to try that out, and I’m so glad that your videos aren’t on pay per view!! I have refer back to them often.
@TheLouisianaHobbyGuy
5 ай бұрын
Please do John!
@billp5356
3 ай бұрын
wow much easier than the older way you showed before
@TheLouisianaHobbyGuy
3 ай бұрын
Awesome! 👍 Thanks for watching!
@sumanchowdhury5547
4 ай бұрын
Thank You!🙂
@TheLouisianaHobbyGuy
4 ай бұрын
You’re welcome 😊
@RobSandstromDesigns
5 ай бұрын
Good demonstration Rich. I’m sure many will find this useful.
@TheLouisianaHobbyGuy
5 ай бұрын
I hope so Rob! 👍
@herbertgreen5145
5 ай бұрын
The videos helps a lot, I’m new at this laser engraving, only been doing it for about 2 months, but learning something new every week, thanks
@TheLouisianaHobbyGuy
5 ай бұрын
Great to hear Herbert! 👍
@andrewatkinson2327
5 ай бұрын
Thanks for the info. Looks great.
@TheLouisianaHobbyGuy
5 ай бұрын
👍 Thanks for watching Andrew!
@trishmadore2104
4 ай бұрын
Loved this video as I learned the icons on the left side of the screen for so many shortcuts!! Thank you!!!
@TheLouisianaHobbyGuy
4 ай бұрын
Glad it helped Trish!
@JimWeaver-gk8pl
4 ай бұрын
Great Video. Thank you
@TheLouisianaHobbyGuy
4 ай бұрын
Glad you liked it Jim!
@LarryDMitchell
5 ай бұрын
Outstanding tips and I'm going to ONCE AGAIN use this technique for a project in the works. Thanks Rich!
@TheLouisianaHobbyGuy
5 ай бұрын
Have fun Larry!
@gilbertboyer9936
4 ай бұрын
Excellent presentation.
@TheLouisianaHobbyGuy
4 ай бұрын
Thanks so much Gilbert!
@charleslamont2963
5 ай бұрын
Rich, thank you so much for sharing life, skills and talent with us. It is EnRICHing
@TheLouisianaHobbyGuy
5 ай бұрын
I appreciate that Charles! Thanks so much for the warm comments!
@xotmc
5 ай бұрын
Wow, can’t wait to incorporate this into one of my projects! I learn so much from you! Thanks 😃
@TheLouisianaHobbyGuy
5 ай бұрын
You are so welcome!
@timtaylor7337
5 ай бұрын
Thank you, Rich. This was such an eye-opener for me😮. I sure appreciate this type of educational information. Tim
@TheLouisianaHobbyGuy
5 ай бұрын
Glad you enjoyed it Tim, thanks!
@milasanchez4033
5 ай бұрын
Thank you for this video, the Mickey project it’s amazing, one question I would like to add the feet’s how can I do that? Thank your videos are great!!
@TheLouisianaHobbyGuy
5 ай бұрын
The same way I added the ears.
@viamer82
5 ай бұрын
Beautiful work as always.I really enjoy watching your videos. And I have to say, I learned a lot. Thank you very much. Warm greetings from the Czech Republic
@TheLouisianaHobbyGuy
5 ай бұрын
Thank you very much!
@elguapo1507
5 ай бұрын
What a fantastic lesson! Thanks very much Rich. Brilliant! 👍
@TheLouisianaHobbyGuy
5 ай бұрын
Wow! Thank you so much!👍 I appreciate the comment!
@carabellacreationsbyshauna6
3 ай бұрын
Great video... This was very helpful in trying to understand the best way to engrave certain materials.
@TheLouisianaHobbyGuy
3 ай бұрын
Glad it was helpful!
@edwinodette4361
5 ай бұрын
Awesome
@TheLouisianaHobbyGuy
5 ай бұрын
Thanks so much Edwin!
@aggieaquarist8470
5 ай бұрын
Another excellent video. Love the new short form packed with tips. I never know when one may come in handy. Thanks so much for all you do.
@TheLouisianaHobbyGuy
5 ай бұрын
You are so welcome Aggie! Thanks for watching!
@bigcountry734
5 ай бұрын
Very nice, as always your videos are great for us just starting out
@TheLouisianaHobbyGuy
5 ай бұрын
Glad you like them!
@rolandg.muller2225
5 ай бұрын
You are simply the best! Thx so much ❤
@TheLouisianaHobbyGuy
5 ай бұрын
You're welcome 😊
@samechaleph1891
5 ай бұрын
I appreciate you sharing these tips, always good to know! :)
@TheLouisianaHobbyGuy
5 ай бұрын
You bet Sam! 👍
@Chucka1463
5 ай бұрын
Question: wouldn't 45 degree angle engraving be slower than 0 degree angle? If do, why not just turn the plywood 45 degrees?
@TheLouisianaHobbyGuy
5 ай бұрын
It is slower with a different affect.
@Andy.H.H.
5 ай бұрын
Great video again Rich! One question, on your business coins, how do you relief engrave and still get the wood grain to show? I seem to get a lot of the burnt wood look.
@TheLouisianaHobbyGuy
5 ай бұрын
You have to do material testing to get the right settings Andy.
@langerm55
5 ай бұрын
Very creative product, very well done video. THANKS
@TheLouisianaHobbyGuy
5 ай бұрын
Thank you very much!
@LSEngraving
5 ай бұрын
outstanding content, sir!
@TheLouisianaHobbyGuy
5 ай бұрын
Thank you kindly!
@bojakcates2817
5 ай бұрын
can you use multi light burn layers instead of just one. just thought you were doing that to make it easaier so you dont have to do multilayers
@TheLouisianaHobbyGuy
5 ай бұрын
Relief fill is all done on one layer to get the 3D affect.
@nuge74
5 ай бұрын
Great tutorial, thank you!
@TheLouisianaHobbyGuy
5 ай бұрын
Glad you enjoyed it!
@JeffBenedict
5 ай бұрын
Awesome video. Gives me new ideas to try out.
@TheLouisianaHobbyGuy
5 ай бұрын
Glad to hear it Jeff! 👍 Have fun with it!
@toddshepard3592
5 ай бұрын
Great tips Sir ! Thank you.
@TheLouisianaHobbyGuy
5 ай бұрын
Glad it was helpful Todd!
@steveusn6852
5 ай бұрын
I still can't figure out how to add the cut layer
@TheLouisianaHobbyGuy
5 ай бұрын
Offset the outer layer, put it on a layer set to line.
@jitoogopal8120
4 ай бұрын
Thanks fior the great Video. I have a question how did you do the offset with the BLUE LAYER. I have tried and just can't get it right. The file you shared does not have the Blue Layer.Thanks
@TheLouisianaHobbyGuy
4 ай бұрын
It wasn't included because it was a specific name. All I did was create a smaller name and put it in line mode on the blue layer.
@akbadwolf
5 ай бұрын
Could you explain the overscanning setting?
@TheLouisianaHobbyGuy
5 ай бұрын
Overscanning provides time for the laser to turn off, slow down to make the turn, and then speed up again before turning back on. The setting is only for diode lasers. Co2 lasers have it built into the control boards (except the K40).
@akbadwolf
5 ай бұрын
What better? Higher or lower number. Not sure if I fully understand
@TheLouisianaHobbyGuy
5 ай бұрын
2.5% to 3% works on most diode lasers.
@akbadwolf
5 ай бұрын
@@TheLouisianaHobbyGuy Thanks. My shop machine had it set at 4.5. Curious as I do not recall ever messing with that setting but my work laptop which I have a copy installed which I use for when I am on the road had it at 2.5. No idea how it was changed. Does not look to be a big deal. Befuddles a senior old sourdough which is not hard. Thanks again.
@TheLouisianaHobbyGuy
5 ай бұрын
2.5% is the default Lightburn software setting.
@sbr-synrosimbugracing9338
5 ай бұрын
Great video. I have a question about the Roly. Do you have to wear protective glasses while it is running? I bought the xtool S1 and wishing I would have bought the Roly instead. Customer service is sub par with xtool and I have heard nothing but good about Roly. Selling my S1 for something built for Lightburn. Thank you.
@TheLouisianaHobbyGuy
5 ай бұрын
I don't, because my back is always to the machine, but it doesn't matter what laser you use, you should always take the extra precaution of wearing safety glasses. No acrylic can filter 100% of the laser beam, 98% at best. I personally never look at the job while it's running, except from a distance or on camera.
@sbr-synrosimbugracing9338
5 ай бұрын
@@TheLouisianaHobbyGuy Xtool pushes the class 1 standard that doesn't require glasses but with my riser, I see flashes from the rear door on my wall. Good advice, thank you.
@carissa4110
Ай бұрын
I'm sorry to ask this, especially if it's covered somewhere, but I'm new to laser engraving & cutting. Does this work with a 22W diode laser? The raised lettering or relief fill? This is what I've been trying to figure out how to do.
@TheLouisianaHobbyGuy
Ай бұрын
It works on any laser engraver Carissa.
@mattmacleod5837
Ай бұрын
Hello I loved the video I did have a question I am trying to make a design where I want to have more then one item raised but I am having trouble getting it right I was wondering if you might be able to give me some tips to try
@TheLouisianaHobbyGuy
Ай бұрын
Just offset each item by 0 Matt. That's how I did it in this video.
Пікірлер: 136