I love my Lee Hand Press. I use mine for 30-30 and 300 Savage reloading. I can use this press where ever I go. Easy to use and very cost friendly.
@robinj.9329
Жыл бұрын
This lee "Hand Press" has been out for decades! Lots of folks use them for working up loads while actually on the firing range. Many of Our Club members have them, with no complaints. For just a few rounds, while at the range, or in a small hunting cabin, this is just the ticket!
@rodneytidwell5727
Жыл бұрын
I started reloading a couple of years ago. I bought one of the kids the Lee breech lock single stage vise and me the hand press. Currently, I reload .303 british, 30-06, .223 and 7.62x39. I usually do 60-120 cartridges at a time. I prefer the hand press to the mounted press and don't really feel that it slows me down - what slows me down is I weigh each individual load. Anyway, I love the thing - I can sit at the kitchen table, load and watch tv all at the same time in the comfort of air conditioning. I use a different trim method than you - I use a lee case conditioning kit along with the appropriate caliber Lee case length gauge and shell holder chucked into my rechargeable drill. I also use lyman pocket reamers for military crimps and lyman pocket uniformers for keeping the pockets the same. I usually don't mix brass prep and reloading in the same session as it gets tedious, time consuming and boring.
@towarzyszbeagle6866
6 ай бұрын
Good video. I do 300BLK and 308 with my hand press, including a full size. I notice you weren't lubing the mouth of the case necks. It's slightly more tedious, but I have found a Q tip with lube lightly to the inside of the case mouth makes a big difference, especially on the re-opening the press action.
@horn410
4 ай бұрын
Данный станок лучше подходит для пистолетных патронов!!!
@wades623
Жыл бұрын
Turning the die in a little more than you did helps because of the flex in the handle. Ive used the one i have i do 308 223 and 40
@user-sb6fe1tm3h
5 ай бұрын
Thanks a lot
@TikkaT3x
Жыл бұрын
I've used Lee lube for years. It's still my first choice.
@FC-ue1yc
6 ай бұрын
True video starts at 04:36
@Toolness1
7 ай бұрын
I may have just gotten a lemon (I usually like Lee stuff) but that quick trim did not work for me. It had a unacceptable amount of variation of length from case to case no matter how I did it, how much pressure I used, etc. I like the frankford arsenal case trim/prep machine but most of the time I use the Lee trimmers with the pilots and chuck it in a drill. Makes quick work of it and really repeatable results. One of these hand tools would be nice to sit and watch TV and prep brass. I have a spare cheap Lee press and a little table I can bring into the living room and will sit and size a ton of 9mm then prime it all so it's ready to go.
@ArgenTheWolf
11 ай бұрын
Hi, asking if this can handle .308 round, and if it supports full resize? Thanks.
@abroxyz98
8 ай бұрын
I'm looking to reload 8mm mauser with this. I already have a lee full length sizing die and a seating die ( both 8 mauser). In addition to the contents of this kit what else do I need?
@Antli2024
Жыл бұрын
I use this one it’s cold outside. I don’t want to reload in the garage.
@Airon79
10 ай бұрын
So is chamfering the neck a different way of seating a bullet as opposed to flaring or expanding the neck ?
@redneckreloader
10 ай бұрын
No, It’s a totally different step. You only have to chamfer if you’ve trimmed the brass. When you trim the brass the edge is left sharp. Think of when you open a tin can with a can opener. When you try to seat a bullet, even with the case mouth flared, that sharp edge will catch on the bullet, and can shave the coating off of it. Chamfering that sharp edge will allow the bullet to slide in smoothly.
@Airon79
10 ай бұрын
@redneckreloader So it deburrs or is there a process for that as well ?
@redneckreloader
10 ай бұрын
The hand tool chamfers and deburrs. One side chamfers the brass, then you flip it over and use the other side to deburr.
@Airon79
10 ай бұрын
@@redneckreloader Cool , Thanks !
@robertd6925
8 ай бұрын
Do you get accurate rounds with it?
@redneckreloader
8 ай бұрын
Yes, I don’t notice any different from any of my other presses
@robertd6925
8 ай бұрын
@@redneckreloader Cool thanks
@user-ez8fg3vd2e
Жыл бұрын
can you shoot these reloads from a semiautomatic like an ar 15 i know the classic lee loader says you cant so i was just wondering
@redneckreloader
Жыл бұрын
Absolutely
@redneckreloader
Жыл бұрын
The difference with the classic hand loader is it doesn’t full length resize.
@user-ez8fg3vd2e
Жыл бұрын
@@redneckreloader awesome i watched your video but am to new to reloading to really comprehend lol thanks ,just ordered my own !
Пікірлер: 26