Bought one of these for my dad like 10 years ago for his Springfield 1911.. It does work a lot, it makes the 1911 a lot more fun to shoot. Idk yet if i want to do this to my R1, i like the classic look and its the reason i acquired an R1.
@Sanguivore
Ай бұрын
Gorgeous firearm! Absolutely love those grips especially.
@samuelrobinson7893
2 ай бұрын
Beautiful 1911, looks very badass!
@meetmeinthegame403
3 жыл бұрын
Reminds me of Boondock Saints man ! Very nice firearm 🇺🇸
@citizenz94
Жыл бұрын
Boondock saints is surpressed beretta m9s, this with a different color scheme would be 2004 punisher
@BloodySawBlade
4 жыл бұрын
For an eBay product, it works. I passed my requalification with this thing on.
@gruffproductions683
4 жыл бұрын
Good to hear. I can't wait to getting my testing video posted. Thanks
@BloodySawBlade
4 жыл бұрын
@@gruffproductions683 No problem, man. 🤙
@gunsquawk4443
Жыл бұрын
It's physics. Vented with a closed bottom. It will definitely reduce muzzle flip.
@markpadilla2274
Жыл бұрын
Beautiful ❤️
@dane-xxx-8713
3 жыл бұрын
I subscribed! 1000% like!
@jerichofalls8236
8 ай бұрын
Solid review but be careful guys! I put an ebay "punisher" style comp like this one on my kimber last year and couldn't get it off. Fitting is required sometimes. I had to send mine to a gunsmith to get it off.
@Lizama1
Жыл бұрын
where did you buy that charger I looked for it on the internet but I can't find it someone give me information?
@bloodruststaples
2 жыл бұрын
It does help, and it is noticeable, but partially because of the added weight up front. I use a Shok buffer in it as well and the two seem to work nicely. Obviously it's not as good as a real comp barrel, but you will still get some gas deflection, due to the fat that the bullet and gasses still leave the barrel before the slide begins to travel back. Worth it? If you can't afford a real comp barrel, sure. Looks really mean though.
@jerichofalls8236
8 ай бұрын
Agreed. I think it'd be alot more noticeable with a 10mm
@HaiLHaiLHaiLo
2 жыл бұрын
Grips need more checkering or texture, but good looking gun
@joshuaabren
9 ай бұрын
They work great. I put one on my Kimber and my rock island but definitely switch that hammer and grip safety to a beaver tail setup. Then you won't need that goofy 3d printed mag extension.
@corryjamieson3909
Жыл бұрын
Holy gun.
@mikewest9033
2 ай бұрын
Trust me it makes a difference with the comp
@Gr0m3t
3 жыл бұрын
Did you make a test video?
@dane-xxx-8713
3 жыл бұрын
you gonna make some shooting vids? realy like to see that one:D
@geprgeartheton6880
Жыл бұрын
Where you get that mag?
@grunster98
9 күн бұрын
I have a Tisas Stingray carry with a punisher compensator on it and man it’s like your shooting a 9mm in terms of recoil those things work wonders!
@Reeltali
6 күн бұрын
Did you have to do any extra work or filing at all to install comp?
@grunster98
6 күн бұрын
@@Reeltali not at all! It fit perfectly no wiggle room nothing nice and snug 👌🏼
@Reeltali
6 күн бұрын
@@grunster98 think it would work on 45 tisas commander?
@grunster98
6 күн бұрын
@@Reeltali oh without a doubt should work. I see no reason why it shouldn’t. I like the bushing comps so much more then ones that go onto a threaded barrel cause A. Eliminates the need to buy a threaded barrel and it overall just feels and performs better in my opinion.
@Reeltali
6 күн бұрын
@@grunster98 gotcha, thanks brother…last question how reliable would you rate the material??? I’ve heard stories where they blow off at the range and etc
@haydenfrost2692
21 күн бұрын
Does it work for other calibers?
@MrLoobu
2 жыл бұрын
What do you mean it doesnt do anything? It's a weight over the barrel and gas ports venting upwards lol. Physics would say it definitely does something, weather you notice is a different question.
@jaketheginger1333
Жыл бұрын
Is that a 3d printed mag?
@bellaphone5719
Жыл бұрын
omg 45 is only row with cheers 🍻
@WitchDoctor87
Жыл бұрын
Does this work for hi capas as well?
@MichaelClaytonCo
6 ай бұрын
Thanks ... bought the last custom 1911 in Canada before Trudeau f🍁cked us. TiN treated, slide lightened. Had a break as well. No accuracy effect. Trying to get it off now. My hands were hurting. Much appreciated.
@irishmaniac918
Жыл бұрын
looking for the right holster owb for mine that has this Compensator, i don't wanna buy one and it not fit the right way, can someone please help?
@badas45
2 жыл бұрын
Is it made of aluminum?
@asusasus5277
11 ай бұрын
will this work with a 1911 in 9mm?
@supersteve76
2 жыл бұрын
Very nice, thank you for the vid. Will this also fit my Rock Island 1911 .45 ACP compact?
@ahmadsalma4975
2 жыл бұрын
Yeah it does I already did mine not long ago
@supersteve76
2 жыл бұрын
@@ahmadsalma4975 It doesnt seem like I will be able to fit on onto my Rock Island 45 ACP compact. The front parts are different than the videos I see. how does the compensator stay attached to the RI model?
@16dNails
4 жыл бұрын
Nice vid! Would you recommend the 1911r1? I've got the 1911 itch again...
@gruffproductions683
4 жыл бұрын
Thanks. Yeah I like the R1. I also just won a Rock Island 1911 at a gun bash that I still have to do a video on if your on a budget
@kimmorrison9169
3 жыл бұрын
My R1 S Enhanced model has been a very nice pistol and quite accurate. Zero issues or complaints.
@joecooper2263
3 жыл бұрын
What kind of Mag?
@Reeltali
6 күн бұрын
Will it work on tisas commander 45?
@garnikhakobyan4311
Жыл бұрын
Soooo😮 would you recommend doing it ?
@Tommy06289
2 жыл бұрын
nice vid! May I ask, where did you get that grip?
@gruffproductions683
2 жыл бұрын
3d printed and painted them. Also bought gold grip screws
@calimack716
2 жыл бұрын
I've been looking for grips like this
@jerryseinfeld1345
Жыл бұрын
3d printed? 3d printed??!! Sheet I didnt think of doing 1911 grips like that.
@GreenThumbGrower206
7 ай бұрын
Where’s the part 2 ?
@dieselgreg60
5 ай бұрын
Can I ask where you purchased the grips for this 1911
@Sanguivore
Ай бұрын
Did you ever find ‘em?
@gutadin5
3 жыл бұрын
How many percent did it reduce recoil and muzzle flip ?
@democratpro
3 жыл бұрын
19.08764%...........approximately
@jonmajarucon51
Жыл бұрын
Can you do a video installing an extended two-piece guide rod with a Muzzle brake/compensator. No one has done this and I am having such a difficult time. Help.
@AtoR2-ARchannel
Жыл бұрын
kzitem.info/news/bejne/yWmmyK6Bi6ucnHo This is removing the compensator video. With a full-length Guild rod.
@jonmajarucon51
Жыл бұрын
@@AtoR2-ARchannel You are the best! Thank you. My barrel link is loose so it is difficult to line up when I put the pin back in. Anyway, thanks so much for the video!!!!
@chadknapp2437
Жыл бұрын
I need a 1911
@RollingxBigshot
3 жыл бұрын
Mines flew down range along with my recoil spring and cap after 3 shots
@gruffproductions683
3 жыл бұрын
Yeah I have heard about that happening with these cheap things. I got about 40 on this one but i want to take it off to see if there is any wear.
@RollingxBigshot
3 жыл бұрын
@@gruffproductions683 yeah they’re mostly just for the cool factor, mine looked cool as hell with it on but I haven’t put it back on since. My best wishes to you that yours holds up
@denigong9708
3 жыл бұрын
The Wilson combat comp reduced recoil up to 30% when tested on a machine made to test recoil. It is a bushing comp.
@anthonynorris6910
Жыл бұрын
I had the same thing happen to me...closed down the range ..so embarrassed ....the tab snapped off after just a couple shots
@user-tz6dz2pq5b
3 ай бұрын
Where can i order it from
@jacobmendez2314
Жыл бұрын
I have a para ordnance expert, what type of compensator would you recommend? I’m not sure what would fit my para 1911
@gruffproductions683
Жыл бұрын
I don’t personally own a para but if it has the standard take down as other 1911’s you should be good to buy most compensators for 1911’s.
@jacobmendez2314
Жыл бұрын
@@gruffproductions683 thank you I appreciate the help!
@danielwelch7971
Жыл бұрын
Link for grips?
@davidSantos-on9dl
2 жыл бұрын
What’s the take down tool name
@anthonylabranche3210
4 ай бұрын
What holster to use for it now the compensator on it?
@efnjohnny
4 ай бұрын
Just look for a open bottom holster then trim to fit
@alanlee9552
16 күн бұрын
Where can.I find a set of those black grips with the gold cross?
@MichaelBrown-vq3ud
9 ай бұрын
Where did you buy your grips?
@gruffproductions683
8 ай бұрын
I actually 3d printed them. Thanks
@williamdolezal9184
Жыл бұрын
You don't have to add a longer spring
@ReptarART
2 жыл бұрын
Do these fit the 4.25 barrel ?
@obailey8586
Жыл бұрын
Cz industries makes one that does and they sell it on eBay it's the officer model
@GAMESTERVISION
Жыл бұрын
whats the price on this lil guy
@georgewashington4914
5 күн бұрын
Very cool gun! your video is good and stuff but sometimes you are too close to the cam i missed some stuff. but keep on going!!
@lunabanana4372
3 жыл бұрын
This is for airsoft, real compensator doesnt follow the slide when it blows back.. doesnt make sense on its function as compensator
@aaroncarey2909
2 жыл бұрын
Have you tried one ? You do that glocks (C) models have ports cut into the slide correct ?
@nursinghomemaintence9927
8 ай бұрын
I would not call this a compensator, It's just a cheap way of looking like one. A real comp threads onto the barrel.All this does is give you a heavier slide.
@n0bly_hades
3 жыл бұрын
How did it go?
@damienholleman
3 жыл бұрын
I bought one and all I can say for right now is the shortened plug they can come with is shit, I’m gonna try one more time with the normal one but if my slide doesn’t lock in place it’s going in the trash
@fettity
3 ай бұрын
What brand of mag is that one in the video ?
@Sanguivore
Ай бұрын
Not sure which brand this is, but if you need 10 rders. for 1911, I recommend Chip McCormick 10 rd. RPM (Railed Power Mag), or Wilson Combat 10 rd. mags.
@fettity
Ай бұрын
@@Sanguivore yeah I already got the chip I just liked the way the base plate look on that one in the video
@Sanguivore
Ай бұрын
@@fettity I believe the one in the video is 3D-printed if that helps any!
@tommybeatz4678
2 жыл бұрын
Where you get the grips??
@gruffproductions683
2 жыл бұрын
Made them on my 3D printer
@SDWNDRX-
2 жыл бұрын
@@gruffproductions683 this breaks my heart I need these grips
@dane-xxx-8713
3 жыл бұрын
Thats a realy realy sexy 45 man! Can I ask where you bought the grips and the compensator from? I wanted to order a compensator from Valkyrie Dynamics, bud they dont ship to Europe...
@gruffproductions683
3 жыл бұрын
Thanks for the view. Gonna be uploading a shooting vid soon. I made the grips on my 3D printer and got the compensator on eBay.
@dane-xxx-8713
3 жыл бұрын
@@gruffproductions683 great job ! looks realy nise!
@herrotto7787
3 жыл бұрын
Valkyire makes a great COMP. I have two and they work...
@SDWNDRX-
2 жыл бұрын
Those grips go fkin hard where in the world did you find them? I must know
@gruffproductions683
2 жыл бұрын
3D printed them, then painted them. Also gold grip screws purchased from ebay
@SDWNDRX-
2 жыл бұрын
@@gruffproductions683 would it be alright if I recreated them?
@wenchywench3192
2 жыл бұрын
Did you fat at 1:13?
@gruffproductions683
2 жыл бұрын
🤣🤣🤣. No but I’ll try to fire one off next video.
@The_Referee
2 жыл бұрын
wow !! remington 1911 + ebay comp !!! what a combo !!! the worst of worst !!
@gruffproductions683
2 жыл бұрын
Yeah if I must say, i even preferred the RIA 1911 to the remington one
@Patrick-kb3hj
3 жыл бұрын
Lol...needs a bushing wrench for a Remington 1911 what a baby.
@user-ye6bg2gc5n
2 жыл бұрын
구입하고싶요 달러로^!^
@bwb3636
4 ай бұрын
Your hands keep moving off camera like this is some F'ed up magic show
Пікірлер: 113