Do you know if anyone sells the bracket welded to the frame the bushing sits in mine is rusted out and would prefer to replace instead of repair?
@tylereldridge6945
4 жыл бұрын
Using a vice grip rather than your hand to steady the punch; brilliant! And I feel sheepish I never thought of that. Part number for the replacement?
@eprofengr6670
5 жыл бұрын
good video
@rodgerwilming6803
6 жыл бұрын
Or you could just burn out the rubber with a propane torch and push the whole mess out, clean the steel sleeve with sand paper and use Polyurethane inserts. Way less aggravation. Did it on my '51 IH/S10 hot rod project in under an hour. Just don't breathe the smoke.
@TraditionalToolworks
6 жыл бұрын
That's true, but Wayne's method will work for everyone, even those without a torch...I know everyone should have one, just saying...(I do have one! 😀) Good video Wayne! Thanks for keeping them coming!
@rogerespinoza9367
6 жыл бұрын
My thoughts exactly. Why not grab the fire wrench and be done in 30 secs.
@xzx4020
5 жыл бұрын
When using the punch after it starts coming out where are you hitting the sleeve?
@code5044
5 жыл бұрын
While using the punch, you are punching around the sleeve and making it collapse on itself. Once you do that you have something that you can hit and push it through from the inside. Hope that helps.
Пікірлер: 8