All the info you need, no fuss, well explained. 👍🏻
@saucepan090
Жыл бұрын
This was so helpful! Got a new lock as our screen door was missing the key, but couldn't get the cylinder out. Cut a sliver of plastic from a yoghurt tub and got the old cylinder out with your trick! Thanks!
@650thunderbird
3 жыл бұрын
Best DIY channel 👍🏻👍🏻 onya Bill!
@billshowto
3 жыл бұрын
👍👍
@Sodany21
3 жыл бұрын
Oh Bill thank you so much my house has the same issue. I am going to Bunning tomorrow 🙏🤗
@AKeable
5 ай бұрын
Excellent video, you explained and showed everything really well. Thank you
@billshowto
5 ай бұрын
You’re welcome 👍
@TimDuncan-w4g
7 ай бұрын
You saved me hours of messing around. Cheers :)
@GR19611
9 ай бұрын
Cam got me, so found your video, THANKS
@TheBlokestar
Жыл бұрын
Ty Bill now I can fix my mums wire door .
@billshowto
Жыл бұрын
You’re welcome 👍
@steveh6054
Жыл бұрын
Saved me a locksmith 👍
@trilam2009
Жыл бұрын
Thanks a lot for the video, the instructions very clear it's very helpful, thanks again mate
@billshowto
Жыл бұрын
You’re welcome 👍
@petermuscio7213
2 ай бұрын
Bill, you put together a great video mate, just what I was after. Thank you.
@billshowto
2 ай бұрын
You’re welcome 👍
@colzz1
Жыл бұрын
Thanks mate 👍
@billshowto
Жыл бұрын
No problem 👍
@Pavan-jf4fg
Жыл бұрын
Thanks mate 🙏
@billshowto
Жыл бұрын
No problem 👍
@surrealist7372
Жыл бұрын
Well done to you my friend, super informational and explainatory.
@traceyboland9961
Жыл бұрын
I have a screen door and handle exactly the same can I install a different brand called trio revive which looks bigger
@DodgeDartSongs
2 жыл бұрын
That was great instruction! Yes, I can do this.
@starmclean2175
2 жыл бұрын
Such a great help, really appreciate you sharing, thank you so much! I'm stuck with replacing mine, haven't screwed it all up, cylinder & snib not in, accidentally the screen door shut with the latch locked and I couldn't unlock it at all even if I put the snib and cylinder in...need help pls. Thanks so much in advance!
@starmclean2175
2 жыл бұрын
Lock body tongue was stucked can't be moved by the snib as it doesn't turn and clicks on the right angle to open, help pls😒
@billshowto
2 жыл бұрын
Lol, there is a little mechanism on the inside that needs to be released prior to being able to turn the snib over. What you need to do I manually move the locking mechanism ( usually this is what the cylinder would do when using the key). If you look up my video on how to snap the cylinder I show how to do this in that video 👍👍
@Sodany21
3 жыл бұрын
Thanks Bill. Can you tell me where you get the lock from and the brand please .
@jeffreyb3238
5 ай бұрын
This is the video I've been trying to find, Bill. Thank you. I had a question about using my old cylinder to keep old key, but Bill has already responded to someone else below with same question. This solves my problem 100%. Huge thank you.
@billshowto
5 ай бұрын
You’re welcome 👍
@tamboktim-a-tye5877
3 жыл бұрын
Hi Bill.My problem is the lock in the lock body is stuck locked & I can`t open the locked screen door.The key clicks but won`t open.Have taken apart all parts but can`t work out how to get the body lock to withdraw so door can be opened outwards.Advise me please.
@billshowto
3 жыл бұрын
Hi, i have a few videos on my channel for how to remove the cylinder lock. Even if the key/lock is no longer working I show you how to bypass it or snap the lock 👍
@tamboktim-a-tye5877
3 жыл бұрын
@@billshowto Its the top body lock that is stuck lock.Handle won`t release the bar lock back.Have totally dismantled the cylinder lock & brackets off the door but can`t get the handle bar lock to withdraw.
@billshowto
3 жыл бұрын
Once you have the cylinder out , you will have to manually release it from the inside of the lock body. Can be done with a screw driver
@emayzing5210
3 жыл бұрын
Thank you for giving easy to follow instructions, you've saved me on having to wait for a locksmith to come out and fix it.
@billshowto
3 жыл бұрын
You’re very welcome 👍
@Archeraurelia
4 ай бұрын
One of the best DIY videos Ive seen! Showing and explaining every component, awesome job! You just scored a new subscriber :) Cheers.
@billshowto
4 ай бұрын
You’re welcome 👍
@DV-zv4ox
Жыл бұрын
The instructions that come with this are ridiculous. You made it so simple and easy to install, zero problems. Thanks Bill - you are a legend 🍻
@tipivailuu6262
Жыл бұрын
What if can't push the bin lock up please my door it stuck
@turkeylurkey3775
2 жыл бұрын
Wow thanks so much - you make it look easy ! Hopefully it will be !
@TheRealMrCods
3 жыл бұрын
Cheers Bill 👍
@billshowto
3 жыл бұрын
👍
@felixneuweiler7043
6 ай бұрын
Great video, very handy!
@JulianLeahy
2 жыл бұрын
legend
@amosmorgan9267
6 ай бұрын
Legend. Thank you
@OneIdeaTooMany
11 ай бұрын
Hey Bill, is it possible to do this and keep the same key? Would it be as simple as reusing the same cylinder in the new door handle hardware?
@billshowto
11 ай бұрын
You can reuse the same cylinder from the old one if you want to keep the same key👍
@OneIdeaTooMany
10 ай бұрын
@@billshowtothanks Bill! That's exactly what I did and it took about as long as the video to replace it and it works perfectly!
@Laumavrik11
7 ай бұрын
Absolutely fantastic video who knew i could change a complete door lock set😂 Thank you you made it so easy 👍
@3mmgf976
2 жыл бұрын
How to fix if I locked inside then suddenly it will flip back?
@volgrenfanbus1294
3 жыл бұрын
My door handle is the same problem no matching colour like this
@TheFrog767
Жыл бұрын
Well done, no messing around clear visuals and instructions on what may stop your progress. 👍👏👏👏🎯
@gggg-vg4vj
2 жыл бұрын
oz oz oz
@lizhang3409
Ай бұрын
Hey Bill, my snib has fallen out of the lock, how can I fix it to ensure if stays in place and doesn't fall out Everytime the door closes? Cheers
@susannal9518
Жыл бұрын
Thanks for video. I used the same brand as you in the video and followed the instructions (the main bolt was out and deadlocked) before I put the cylinder in. The keys won't lock the door from the outside (ie. main bolt won't come out). Do you think this is an installation issue or the lock mechanism issue? thanks
@grahamandrews6791
24 күн бұрын
Thank you so much for your video. You made it so easy to follow. Thanks again. 👍
@laurenburridge2866
9 ай бұрын
Just found you!!! SUPER FABULOUS. YOU made it so understandable step by step 👍👍👍👍
@billshowto
9 ай бұрын
You’re very welcome 👍👍👍
@tamarashepley5192
6 ай бұрын
Soooo helpful! Thank you!!
@billshowto
5 ай бұрын
You’re welcome 👍
@anthonyviscusi4042
2 жыл бұрын
Where can I purchase that Yale lock...I believe it's the Quattro model.
@hileger4644
2 жыл бұрын
Thanks Bill. Great video and it solved my issue in removing the cylinder.
@glennsblog6686
2 жыл бұрын
Hi Bill, I have a sliding security door that has the triple lock just recently after alot of rain in my area the silver latch to lock it from inside is not always locking until I move it back and forward so to speak then it looks. Would that be one of the triple locks in the door frame coming off alignment ? Rgds Glenn
@billshowto
2 жыл бұрын
Hi, the tri lock are known to cause this issue as all three latches will need to line up perfectly in the strike plate for it to lock. I have another video addressing this exact issue on a single latch lock but the concept will be the same 😉
@talwindersingh4583
Жыл бұрын
Think you Bill ,Excellent 👍.
@jengray9280
5 ай бұрын
Such a great video, thanku buy I can't get anything to fit into the gap to move that little part lop
@BamBamMaori
2 жыл бұрын
You are the man bro, your videos are awesome cuzzie, I'm from a Demolition background bro so everything I do is rip tear bust not putting stuff together I definitely need your videos LOL
@billshowto
2 жыл бұрын
Lol you’re very welcome 👍
@andywu8771
Жыл бұрын
Good on you mate. Appreciate for what you have done here
@SS95170
2 жыл бұрын
Thanks Bill great video, you got me out of a jam.
@Ravenwynterful
2 жыл бұрын
Hey Bill... great video, but I am still stuck trying to remove the old cylinder. It simply won't come out..... I can see daylight on both sides through the gap between the cylinder and the lock body, so it doesn't look like the cam is stuck holding it in. However, I cannot find anything small enough to fit in the gap. I have tried everything, down to the finest sewing needle, but nothing will fit. Very frustrating1... I have a new replacement lock ready to go, but can't get the old cylinder out! :-(
@billshowto
2 жыл бұрын
Hi Robert, if you’re struggling to fish the cam out you have two options . First is to pick the lock and second is to snap the lock. I have a video on my channel for how to snap it 👍👍
@Ravenwynterful
2 жыл бұрын
@@billshowto I was a bit nervous that I would wreck the door, but I tried your 2nd option; to snap the lock........ FANTASTIC! i would never have thought of that until I saw your video. It snapped so easy with little effort, and now I have installed a new door handle & lock! Thanks so much Bill for your great videos.
@billshowto
2 жыл бұрын
You’re very welcome, glad it helped 👍
@giancarlor1325
2 жыл бұрын
After an hour trying to get the cylinder out, I finally thought let's see if KZitem can help. Thanks for the video Bill and these comments. I had nothing thin and sturdy enough to turn the cam so I snapped the the cylinder like you said 👍
@engineerau49
Жыл бұрын
well done! very good quality.
@jennifermcqueen9843
2 ай бұрын
Bill, you are awesome. But my screen door is latched closed and won't open. The lock turns, the latch turns but the latch won't open, soI can't get at the parts between the door and the strike plate. Gaaagh! I'm hoping you can help with this!
@billshowto
2 ай бұрын
I have a few videos on how to snap the cylinder lock if it’s faulty.
@GrantJohnson-zz9ir
4 ай бұрын
I appreciate your explanation and for helping us all out. thank you.
@billshowto
4 ай бұрын
You’re welcome 👍
@learnerone
3 ай бұрын
Your a champion! perfectly explained and helpfull, especially if you don't have a key anymore. Thank you so much..
@billshowto
3 ай бұрын
You’re welcome 👍
@jakesacco264
Жыл бұрын
Why is it every time I need a DIY home tip Billshowto has me covered. Awesome channel bro!
@billshowto
Жыл бұрын
You’re welcome 👍
@jenmattrichter3378
2 жыл бұрын
I have my key but my cam lock is going down not up - any suggestions??? I can’t fit anything in to flick it up the right way.
@billshowto
2 жыл бұрын
I have a video on how to snap the lock👍👍👍
@jeffbluejets2626
Жыл бұрын
Have a similar lock which, when the manual lock lever is operated from the inside, 90% of the time we can again unlock from the inside with the small lock lever. There are times however that once locked manually inside via the small lock lever, the small lock lever jams and we have to unlock the door with the keys....very annoying. ...any ideas? ...I've looked at it every which way but buggered if I can see what is malfunctioning.
@jackthomson73
8 ай бұрын
Awesome, easy to understand, perfect explanation. 👍👍. Watched a few of your vids now mate and you are hands down the best instructor I’ve seen. Well done. Cheers from outback Queensland 👍
@ksmart10
3 ай бұрын
Your a lifesaver, I've been able to fix 3 different security screen doors, 2 didn't have keys, thank you🙂🙂
@davidanderson4876
6 ай бұрын
Great video. Made changing over the handle and lock very easy. Especially helpful at 8:26, as although the door would latch, it wouldn't lock. I just used a chisel to clean out some excess wood in the strike plate recess and it then locked perfectly. Total cost was $50 for the handle mechanism and saved me money calling out someone to do it.
@mmcsweet
2 жыл бұрын
Hi, I need to replace the screen door lock. Could you put a link to the exact name for this product, I'll probably go to Menards. Hope I can do this job myself :)
@frankdietsche8384
Жыл бұрын
Thank you for a well explained video. I will attempt to remove my lock from a crimsafe security screen . A wiper blade steel enforcement strip should be the way to go .cheers
@sle2979
2 жыл бұрын
Excellent tutorial mate
@aussiechickenman4865
5 ай бұрын
No luck getting my lock barrel out even with door open and key. Lock barrel is such a neat fit that even feeler gauge won’t let me flip up that pawl up. A previous trick I saw and tried was to remove the whole door and upend it to flip the pawl…even that didn’t work. I keep looking out for helpful videos like this. The lock barrel looks to strong to just snap it with multi grips as I’ve seen demonstrated for sliding doors. I guess I’ll have to pay a lock smith to show the ultimate secret.
@billshowto
5 ай бұрын
They all can be snapped. Save your money and snap it👍👍👍
@aussiechickenman4865
4 ай бұрын
@@billshowto 👍😊
@bawagonwheels01
3 жыл бұрын
You legend! No need to read the instructions, just watch Bill's videos, like and subscribe and you're all good.
@wendymiller8567
Жыл бұрын
Thanks Bill, loved the demo! And the weather report 😅
@sdrscientific3639
2 жыл бұрын
Hi Bill, Its a tasman MkII, managed to fix it after all. There were no instructions in the box, so I downloaded a pdf. I think I placed the snib at the wrong angle when installing the handle. Thanks for your reply in any case! I'll check out your other videos as well
@billshowto
2 жыл бұрын
You’re very welcome 👍
@theot71
2 жыл бұрын
I took on this replacement. The removal of the old lock became an issue for me. After successfully removing the key cylinder, the lock body was stuck in the door. It can move up and down in the door frame but something prevents it from coming out of the door frame. At 3:55 Bill pinches the latch and pulls out the lock body without effort, makes me want to cry watching. The old lock body does not have the holes for the snib so the new handles could not be installed with the old lock body. No idea what I am going to try to get past this issue.
@billshowto
2 жыл бұрын
Send me a photo and I’ll try and help. You may have a tri lock which has arms on the top and bottom of the lock body to operate a triple locking/latching system.
@kyriacandro
2 жыл бұрын
You can also snap it with 2 shifting spanners very easy
@benjenkincpa
Ай бұрын
Thanks Bill
@SupportTpop
3 жыл бұрын
Can you please show how to replace Power point cover?
@leepopaz253
2 жыл бұрын
CAMERA ANGLE IS SO FUCKING BADDDD, COMMON SENSE IS SO RARE THESE DAYS.
@erds
2 жыл бұрын
It sure is. He's using a head cam for obvious reasons, and I can see everything perfectly adequately. If you need a cinematographer with Spielberg directing, perhaps help videos on KZitem are not for you. Great how-to, Bill. Keep up the good work. 👍
@leepopaz253
2 жыл бұрын
@@erds WAS I TALKING TO YOU??? IS IT OK WITH YOU IF I HAVE MY VIEW OR ARE YOU JUST LIKE ONE OF THOSE DICTORS IN THE MAKING??? I NEED TO KNOW, DO YOU ALWAYS STICK YOUR BIG NOSE IN OTHER PEOPLE'S BUSINESS???
@simonrushworth2801
2 жыл бұрын
Great video Bill! I think I have done everything correctly, it locks fine with the key and with the snib, but the snib falls out easily. What have I missed?
@billshowto
2 жыл бұрын
Hard to know without seeing it. What brand did you use and if you send me a photo/video I may be able to help👍
@natikafullerton9668
Жыл бұрын
Legend
@derrickstubbing5434
2 жыл бұрын
Thank you so much for that ,
@xxgoiksxx
2 жыл бұрын
Mate you killed it . Thank you 👍🏽
@ConcreteJungleGames
2 жыл бұрын
Cheers mate, good video
@blaiseaussieninja7747
3 жыл бұрын
Oi bro where u located
@norsco272
2 жыл бұрын
So that's how you remove it without a key, lucky I found your video! 😁
@billshowto
2 жыл бұрын
👍
@mranonymous8979
3 жыл бұрын
Good job 👍 What if the latch locks the inside but can’t lock the outside with key ?
@billshowto
3 жыл бұрын
Could be the cylinder or a faulty mechanism inside. If you open it up and remove the cylinder you can usually spot the issue 👍
@roselewsley4125
3 жыл бұрын
Excellent, thank you!
@sc2836w
2 жыл бұрын
Life saver! Thanks!
@viclion1598
3 жыл бұрын
Thanks legend
@enfortro
2 жыл бұрын
Thanks bill. Legend 🔐
@billshowto
2 жыл бұрын
👍
@davidyoung800
2 жыл бұрын
Just what i was looking for .. Thank you so much.
@billshowto
2 жыл бұрын
You’re welcome 👍
@rkw5880
2 жыл бұрын
Well done Bill good job 👍.
@billshowto
2 жыл бұрын
👍👍👍
@jilliandavis5958
3 жыл бұрын
Thank you Bill, I was able to fix my front door security screen lock by watching your instructions. I have a different lock body with a whitco lock, and it now works perfectly. 👩🦰
Пікірлер: 130