"You don't need too much" as you proceed to spray half the can 😂
@alanboggs2315
Жыл бұрын
I know. I was like wth lol
@trackshun
Жыл бұрын
“You know, uhm”
@gsolo99
8 жыл бұрын
Thanks for posting this video... I sprayed WD-40 on my wheels and let it soak in for 10 mins and then sprayed them with a power washer. The PlastiDip came off like butter and I had put on a lot of coats... Good stuff!!
@carnut9193
9 жыл бұрын
Spay brake cleaner on your brakes after, WD can screw up the pads and make the brakes less effective, i.e. oil on a friction surface.
@s.lawrie8466
8 жыл бұрын
Good helpful video and all. But, you really need to let people know that they should COVER THEIR BRAKES when they do this. Doesn't matter how well you think you've cleaned it with pressure washers, thinners or brake cleaner it's just NOT SAFE. If WD-40 gets into your brake disks then yes, they can be cleaned with thinners or brake cleaner. However, if it gets into pads that's them done! There's no ifs buts or maybes about it... you should get them changed! Lubricants and such tend to seep/soak into the pads quite quickly and once that happens they will NEVER work correctly again. P.S. I doubt a home pressure washer ever be enough to clean them properly. But good Vid. You seem to have had the best result I've seen with WD-40.
@gsolo99
8 жыл бұрын
Thanks for posting this video... I sprayed WD-40 on my wheels and let it soak in for 10 mins and then sprayed them with a power washer. It Plasti came off like butter and I had put on a lot of coats... Good stuff!!
@TheDriveByGuys
9 жыл бұрын
Mask your brakes or just spray the wd 40 on a rag
@Khaotiic
9 жыл бұрын
i just sprayed the wd-40 straight onto the wheel and let it sit there for about 10 mins then power washed it
@TheDriveByGuys
9 жыл бұрын
Jeremy Bilodeau most ppl dont have power washers so that wd-40 stays on the rotors but your method seems fine bro
@Khaotiic
9 жыл бұрын
I mean a hose works also just put it on the long stream one
@Iamdc2_jay
4 жыл бұрын
Shut yo bitchass up
@nalsra0
2 жыл бұрын
@@Iamdc2_jay you really got him there!
@patternaut8338
8 жыл бұрын
I've heard of/seen Goo Gone do pretty much the same thing. I tried using WD-40 with a power washer yesterday, I couldn't get it all that way. I'm gonna go back at it today with Goo Gone, some microfiber cloth, and a bit of elbow grease.
@ringdingersworldwide741
5 жыл бұрын
Always soak brake pads in WD 40 overnight before installing them on your vehicle🤪
@nathanrounsfull7872
8 жыл бұрын
as I saw him explaining that Wd40 removes the dip I was just saying "no he's not going to douse his brakes in wd.. no he wont.. omg.. he just fucking put Wd40 on his brakes!!"... people...
@hanksgarage_
9 жыл бұрын
Thanks for the vid. I just bought a bike that the guy plasti dip a few things on I'll have to try this method and hopefully can remove it.
@Frank_Hwhite
7 жыл бұрын
cant touch wd40 with bare hands?.. damn, i should of been dead yrs ago
@coreylongenecker2288
8 жыл бұрын
the easiest way to get plastidip off that i have found it to actually put more on. you should have put on enough layers originally that you would be able to peel it but if not just get another can and spray it on to build up layers so you have a nice thick layer that you can then peel up in decent size pieces.
@lserezhkin
9 жыл бұрын
Man, never spray WD40 into your brakes system. WD40 is a kind of oil that forces water to go away. You can't "wipe" WD40 with water.
@Jalum64
9 жыл бұрын
I've been meaning to do this with some of the spots that were left in the fenders, tails, and door jams. Haven't really thought about WD-40, but hopefully it doesn't jack up my paint.
@Khaotiic
9 жыл бұрын
I dont think it should harm it as long as it doesnt sit to long but dont hold me to it
@Jalum64
9 жыл бұрын
That's what I was thinking as well. We'll see here in about a week when I pick some up.
@Edgedable
8 жыл бұрын
+Jeremy Bilodeau hey how did you do the two tone wheel that neatly? we are having head ache trying to figure it out
@LightTheEntertainer
8 жыл бұрын
+Jalum64 It won't mess up your paint. Like Jeremy said it isn't meant to sit on there for every, but it'd is frequently used in mechanic shops so it's designed to not cause any damage to paint whatsoever.
@Jalum64
8 жыл бұрын
It's just one of those things I try not to use just because if you don't wipe it up fast enough or get all of it it'll possibly cause damage. I actually got some of the Dip Desolver from DYC and it worked really well on some overspray that I've had from when I dipped my car a few years ago.
@jacobsegur1819
9 жыл бұрын
If you'd just spray a generous amount of dip on when painting, the removal is VERY easy.
@lateefgammar1368
7 жыл бұрын
Jacob Segur
@asylumhandicrafts
5 жыл бұрын
Not after 2 years lol my dip had about 10 or more layers and after th years it became brittle and chipped off so this helped a lot to remove it from my side skirts. Gonna take off the tires to remove my rim color though.
@drxsasquach
2 жыл бұрын
Hes never gunna die, thanks for the video
@corycoyle6725
9 жыл бұрын
Take off the tire?
@NitrooJen
8 жыл бұрын
Just a suggestion.. make an edit bubble on the video suggesting that people not soak their brakes in wd40... take the wheels off maybe?
@sebastiankorbanek3221
8 жыл бұрын
good idea to spray wd40 on ur brakes lol
@DanielTapiceria
4 жыл бұрын
🔥lol
@ItchesIt
9 жыл бұрын
So much for those brake pads!!!
@LiTeRac
9 жыл бұрын
WTF people? First of all, your first coat od plasti dip should almost this thick and better than this. After that you should add 3,4,5 more. Then it peels and looks great. If you wanted a diamond effect you should mask it. ALSO!! Spraying WD-40 on the brake discs? That's dangerous advice. Big thumbs down.
@VaguetoBlogs
7 жыл бұрын
can I apply wd40 in the car without affecting the original painting?
@miguelmendoza9765
2 жыл бұрын
yeah, what happens here?
@stolpesouthstories
8 жыл бұрын
have fun at the next red light haha
@ramonflete7483
8 жыл бұрын
I have a ford escape 2006 and apply plasti dip smoke into the light. then paint does not fail easily, wd40 would do, whithout damaging the light?
@misterawesome1234
8 жыл бұрын
i had bought a 2007 skyline for a steal, unfortunately previous owner had spray painted the rear lights for that smoked tail lights, terribly done. nothing worked so i had to wet sand, buff and polish. looked like it never even touched spray paint.
@ShogunAutoworks
9 жыл бұрын
avoid the asphalt tho. and y'all dish soap gets the wd off the brakes an wheels
@dstrs1482
6 жыл бұрын
Wd40 on the brakes hahaha
@a.alharbi1220
7 жыл бұрын
does this works with chrome wheels with causing damage? i have mercury marauder and am afraid
@ayyWIlliamz
5 жыл бұрын
I have a marauder too looking to get it taken off
@DawgcityClev
Жыл бұрын
Goo Gone.
@jdecastro357
5 жыл бұрын
Bending down is too much work, just move the car lmao!!
@StoryOfMeRD
7 жыл бұрын
mask your brakes broo 😧😶
@DanielTapiceria
4 жыл бұрын
yea right on your brakes lol
@georgeespinoza6710
7 жыл бұрын
fuck stopping i guess
@bipedalhominid6815
5 жыл бұрын
Lol who pasti dips a kia
@malcolmduncan9947
4 жыл бұрын
Don't need too much uses half a can lol
@battosaijenkins946
8 жыл бұрын
Jeezus CHRIST, how many times do you have to say 'ahhhhhh' and 'ummmmmm'?! Sorry but thumbs down~ =(
Пікірлер: 65