They do work, but try harder to not strip those heads.
@merecedescortez5409
3 ай бұрын
Great useful information. How about when the bolt is blind? - (No lines on the front of the screw ?)
@Rotorwolf31
Жыл бұрын
Yes they do work but as an aircraft mechanic they do not work the best on some screws only because they are made of a harder steel
@justingrissom77
8 ай бұрын
exactly i work on pipers cessna’s, sky masters and the machine screw nut plates will strip so easily especially if they’re painted over, what i do it drill a 1/16 hole sideways just a little into the screw head where ever you strip it and stick a pick in there and try to spin it, its not always easy though when you’re so worried about paint
@MM22272
Жыл бұрын
Avoid Philips and flathead screws and use only Robertsons except for those made of soft metal.
@marczlli1649
Жыл бұрын
Never had luck with it the 3 times I try it
@TheGrabit
Жыл бұрын
Did you try the real ones?
@corbenotton
Жыл бұрын
Never had luck with these things
@jamesdenny4734
2 ай бұрын
What if the head is broken off!? Will it still work? 🤔
@sya286
Жыл бұрын
Cool!
@HighSaiyanZ
25 күн бұрын
Just bought one of these kits and i had no luck getting the stripped screws out guess im fucked
@mikedonlon1594
21 күн бұрын
Did u try low speed high torque setting this guy got lucky with the speed
@andriska2023
4 күн бұрын
Where did u buy them?
@HighSaiyanZ
4 күн бұрын
@@andriska2023 off Amazon I just bought a new HDD bay and now I got my PS3 working even better just put a 256gb SSD in it and it's a night and day difference
@gregorall9779
2 ай бұрын
This tool works maybe half the time.
@theupson
4 ай бұрын
ah yes the famous lowes zinc/chewing gum alloy screws. those bastards can just plain tear out even if the bit stays properly seated.
@josephwuencedladovalencia8695
10 ай бұрын
Very snazzy
@heyitsbroski
7 ай бұрын
it's never this easy
@Ret2090
3 ай бұрын
Try it on a flat head screw.
@user-kr2ef8vw2l
8 ай бұрын
Hand tighten the chuck bud
@mikedonlon1594
21 күн бұрын
I never do that 😂
@jimbond670
3 ай бұрын
Bot that. It’s garbage. Broke 2 of them in 5 minutes.
@mikedonlon1594
21 күн бұрын
U have to use low speed high torque setting or it will break this guy got lucky
@Arlaul
8 ай бұрын
Its not hard to not strip screw heads... As soon as your bit starts slipping, stop your drill, put your shoulder into it, then try again.
@megaflux7144
8 ай бұрын
what if i just want to drill the screw head off? what do i use for that? i dont give the slightest fuck about removing the screw just want to take the decking off.
@fuckadoodle2
Жыл бұрын
You know if you use the right sized Philip head bit and actually put some strength into it you could get it out without stripping the absolute fuck out of it.
@kap1526
Жыл бұрын
Not everyone does that. So sometimes you have to fix someomes fuck ups
@fuckadoodle2
Жыл бұрын
@@kap1526 I’m a carpenter and a metal worker, and I’ve literally never seen someone unintentionally strip a bolt or screw this badly, literally never, out of decades of work. And your telling me not everyone purposefully uses the right sized Phillip head? Your an idiot.
@josephperna2081
Жыл бұрын
He stripped it on purpose, for the sake of the video promoting the product.. maybe you should consider therepy with all that anger man
@ElectricScooterMan
5 ай бұрын
I ordered them at temu. I got this issue today
@mikedonlon1594
21 күн бұрын
Temu is ur first mistake
@ElectricScooterMan
21 күн бұрын
@@mikedonlon1594no issues of them.
@_1ben
Жыл бұрын
You don't know me so with that I say save your money, zero results
@kipperlane5589
Жыл бұрын
Just take your bit and hit it with a hammer and pull that screw out
@MatSmithLondon
Жыл бұрын
Er, what?
@sorrymrgoogle2601
Жыл бұрын
Genius
@StopTheBurn
8 ай бұрын
Square head fasteners are better! Canada knows.
@DudeBro824
Жыл бұрын
Thought you was actually gonna show a trick, but you just showed us all a product most of us know about. Thanks for wasting my time.
@John-mz8rj
Жыл бұрын
Rubber band
@brabus343
Жыл бұрын
Using a drill to drive the screws ? Ok sir, maby buy an impact gun😂
@MatSmithLondon
Жыл бұрын
Absolutely agree. If you use an impact gun and you are careful, you never need to strip screws in the first place. Sometimes screw heads fill up with dust or paint, just use another screw tip to scratch out the paint or use a vaccuum to remove dust. Okay, so if the screw is already stripped (e.g. by someone else) then yeh - you need to solve the problem. I've used these bits before, they are rubbish...
@brandocommando4459
Жыл бұрын
Hard to tell the original installer to turn back time. This thing helps when you're fixing shit or taking stuff down and you run into one. I love these bits when i get to use them
@rolls_8798
Жыл бұрын
a drill works fine if you're not a dunce
@mb4266
Жыл бұрын
Not here to bash but I’ve used identical product several times. ZERO SUCCESS!!
@allanblount4956
Жыл бұрын
I've had excellent results and have been using this new gen' easy-out for years. The moral, sometimes something goes wrong.
@mikedonlon1594
21 күн бұрын
U have to use low torque high setting
@mikedonlon1594
21 күн бұрын
Low speed high torque i had a brain malfunction for a second
Пікірлер: 47