The capacity is still the same Demo! ;) Just has lower voltage! You now have 2500 mah 2s battery Edit: those cell 2500 mah cells are wired in series to increase voltage! Would be different if they were wired in parallel
@CJDavies
6 жыл бұрын
Came to say this - a 2500mAh 3S1P pack is three 2500mAh cells in series, not three 833mAh cells in parallel!
@SickocrowAU
6 жыл бұрын
Yeah the Mah stays the same. The total Watt hours drops from 27.75 to 18.5.
@7demo7review
6 жыл бұрын
+Aleksander Hesbø ahhhh,,, darn it!!! You’re right,,, I’ll put a notation in the description!
@7demo7review
6 жыл бұрын
Thanks for the note- Ill re- edit and repost the video...
@7demo7review
6 жыл бұрын
Yup--- good catch... I'll repost this video with a correction..thanks!
@frasersteen
6 жыл бұрын
One of the best ideas I have seen for separating cells is to use dental floss to separate the cells without damaging them.
@headfog7621
6 жыл бұрын
Fraser Steen I do a Little rubbing alcohol for lube.
@jonpacheco7581
6 жыл бұрын
I just want to say thanks and show you some appreciation. With your video I was able to save my damaged battery. Although it will be less voltage I can still use it! 👍🏽👍🏽👍🏽🤙🏽
@themusichallacademy2787
4 жыл бұрын
Thanks brother. Thanks a lot for saving my efforts
@AbuGuroza
4 жыл бұрын
may i ask what type of protective plastic for that protective coatings? i'm gonna make a split lipo for my airsoft as the pre-split is pricey as hell
@robertholsopple9451
3 жыл бұрын
It's good practice to drain the battery as low as safely possible before doing a job like this in case of a fire. The more these lipos are charged the bigger fire they make, if they do combust. Good video though.
@stewjade
6 жыл бұрын
Hey Demo old mate , Aleksander beat me to the punch. Yes the lipo is still 2500 mah even it was one cell, 1s, it still would be 2500 mah. You've been caught out man, one point to me and zero to you ha ha. Anywhooo keep up the good work. Cheers Stew.
@7demo7review
6 жыл бұрын
+stewjade your totally right.... back to the drawing board,,, lol. I may take this video down and add a note about the mah
@stewjade
6 жыл бұрын
Don't worry, I made the same mistake when I first started splitting old packs up to make a newish one's etc. The difference was didn't tell the world out there via KZitem, ha ha. Score even now. Cheers Stew.
@stayinthepursuit8427
4 жыл бұрын
@@stewjade so what changed? Voltage dropped
@stewjade
4 жыл бұрын
Karan Karnik yes indeed, in this case 1s would be 3.7 volts, 2s 7.4 volts and so on but all 2500 mah.
@stelic9515
3 жыл бұрын
thank you
@johnbee1574
3 жыл бұрын
It’s safe enough to do just done this to a pack of mine. I’d drain it to 3volts per cell first. And make sure the front door it’s unlocked incase you need to leg it
@shutdahellup69420
5 жыл бұрын
so u charge it in 3s port like before or 2s port?
@7demo7review
5 жыл бұрын
2s port
@shutdahellup69420
5 жыл бұрын
@@7demo7review thanks, also what if i plug it in 3s port? it would still charge right? cuz i dont feel like cutting off the edge of the balance plug...so i dont accidentally mess it up
@mazpr2025
6 жыл бұрын
Would have good to maintain the macro focus to be more clear of each step.
@DRAXpromo
6 жыл бұрын
my dose my 3s lipo have 6 cells
@tommuhlemanjr.3871
6 жыл бұрын
Hey Jeff, good video except your math is a little off, lol, it’s still the same capacity just lower voltage. 👍😎
@7demo7review
6 жыл бұрын
Yup,,,, I'm going to re upload the video with a note in the beginning and cut out the parts where I talk about compacity,,,
@Babihrse
3 жыл бұрын
Is it possible to cross the terminals to loose the mah but keep the voltage? Bought a 900g battery for RC plane 6000mah don't think the thing is gonna go airborne with the weight!
Пікірлер: 33