Seven years later and you just helped me! Trying to remove an "old" faucet and looking under the sink I can barely move and well my light is casting shadows all over. I'm so confused because of some gold cover, the collar! I'm thinking do I tug it, twist it? Finally looking and looking I notice the faint words MOEN on the faucet up at the sink but it was really faded. Go searching for models used in 2015 online... Lol. Somehow come upon your video and in your explanation and video here, I "get it." Go back, then I see a bolt on my model that presses against the collar to tighten the assembly to the unit above! THAT'S IT!!! Sounds silly but I was stumped. But you gave me the clue. I loosened it enough to see that yes this will let me pull the assembly out and I'll do that tomorrow. (Dinner time where I am now.) But thanks again for posting this. You saved me from having to call a plumber.
@nemesisgy
2 ай бұрын
Thank you so much for this explanation. I’m in the process of replacing this exact same faucet and your explanation really helped me out with getting it loose.
@EasyIAPs
5 жыл бұрын
Craig, Thanks for your time to do this video, much appreciated. I was having a hard time disconnecting the Tap/Faucet hose line when I found your video. Once I found the correct box wrench, it came off and using an old spark plug socket wrench, the entire faucet came out without me getting up once. Now you know how old I am, having a spark plug socket! Sure wish I could tune up my truck, like the old days. Thanks again for your helpful video.
@1elkhair
5 жыл бұрын
Thanks Craig! This is very helpful, as I'm removing a faucet like your old Moen & there's zero room under the sink to do much. But despite the tight quarters (I have to lie half way on my side through a narrow cabinet opening - it's in our trailer) I must get the faucet out. Your video has already helped me.
@scottwerner1635
4 жыл бұрын
I can’t tell you how much you saved my life. That damn faucet has had me by the short and curlies for too many hours. Thank you so much! Thank you, thank you, thank you!
@omegoa
2 жыл бұрын
Well you took a long damn time to get to the point, but your explanation was great. Thanks for this video, Craig!
@805jtorres
5 жыл бұрын
Thank you. I’ve spent the latter part of 2 hours trying to remove the faucet. Don’t have the tool - faucet was here when I bought the house. This saves me from tearing up my entire sink.
@marktenzer2253
7 жыл бұрын
Thanks, Craig. What a great help and a perfect answer as I was trying to remove a Moen faucet.
@jeannave1
5 жыл бұрын
YOU WONDERFUL GUY!!! I have the same faucet and didn't know how to get it off because my old plumber didn't leave the old tool. Thank you a million for this video!
@slopokebob
4 жыл бұрын
Thank you bro!!!! Spent a hour and a half messing with it, till I put on your vid. 1 FREAKING nut compression holds on the whole thing. Thank you thank you
@eke413
6 жыл бұрын
Thanks a bunch!!! I was starting down the same road to frustration.... this video saved me the trip!
@GivingGodTheGloryG3
Жыл бұрын
Thanks for this video. You just saved me a bunch of time. Mine did the same thing until the sprayer head came off and water shot out everywhere.
@robertf.8080
Жыл бұрын
Thank you very much Craig. That was one tough son of a b!tch to get out. Your video helped immensely. I'm so glad I didn't choose Moen for the replacement. 😅
@GammerThumbs
5 жыл бұрын
Thank you!!! I had a heck of a time trying to get this thing off before I found your video.
@smitty4493
6 жыл бұрын
thanks for this video bro, my mohen was bought in 05 i had no idea where that damn tool was but i did just like you and it worked
@rickfontanares1
5 жыл бұрын
Thanks man I really appreciate you taking the time to describe how to un-install this faucet. I am never going to buy another Moen product in the future.
@tarstarkusz
4 жыл бұрын
Yeah. TOTAL piece of shit. I had to rebuild mine twice and then the handle started leaking just like his.
@melissabertolino4515
7 жыл бұрын
Thanks, this is exactly what I need to do right now.
@joedevitto6113
4 жыл бұрын
This is what im having trouble with . amazing how it is attached like that . this sure helped , the new faucets now dont have this and so much easier to put on and take off. thanks for sharing ~
@ParanormalNormalcy
6 жыл бұрын
Same faucet here, same piece of crap hose problems. so glad i found this video as i was about to take a hammer to the top piece. Thank You for posting!!
@LH-zv2zq
Жыл бұрын
Your video still is highly useful. After 5 yrs of use, I ran into the same problem as you with this Moen faucet. Your removal solution saved me hours of frustration figuring how to remove it without that Moen tool. Tnx
@counterproof
6 жыл бұрын
THANKS! Exactly the info I was looking for!
@nzo012
4 жыл бұрын
Thank you for posting this, you saved me a ton of time with this video.
@g0g0Sutra
2 жыл бұрын
Deadly buddy! Thank you for the tip! Haha, you had me chuckling there. I to, felt your frustration which led me here. Poorly designed and produced product from a manufacturer I will not buy from again.
@psalvo8582
7 ай бұрын
Since I am replacing the entire fixture, I just cut the hose, removed it from the sleeve, then used a deep well socket and a ratchet on the nut under the fixture. Quick and easy.
@user-pg6jl7jw7s
6 жыл бұрын
I had one of these and had it repaired several times. The thing almost rotted the bottom of my cabinet out from all the leaks. Great video! I will never own a faucet made by them again.
@w3vjp568
5 жыл бұрын
I installed one of these Moen pull-out faucets a few years ago, it has been nonstop trouble, failing at multiple points. I strongly recommend avoiding Moen faucets, I will absolutely be avoiding anything made by them when we get our kitchen remodeled.
@leilanihoglund2563
3 жыл бұрын
You are a life saver!! Thank you so much!!!
@gitarmac
7 жыл бұрын
I had a moen faucet replaced with another moen faucet. What pieces of crap. I should have learned the first time. Now I'm going to replace the 2nd one with something else. I found this video when looking for a way to get the faucet off. Thanks for the video. Mine looks somewhat different but the struggle is the same.
@glennlehman9354
3 жыл бұрын
I had the tool, but underneath/behind the sink is so tight at that point, there was no way to get a good grip and loosen. My back and knuckles thank you for showing the other method - which worked flawlessly - even in the tight spaces !!
@flem1064
3 жыл бұрын
This video was very helpful thank you!!!
@rutgersbeerman
5 жыл бұрын
I have the opposite problem... I need to tighten, but dont have the tool. But, totally shows me how it's supposed to connect, so I think I can figure it out from here! Thanks!
@robbrue2
5 жыл бұрын
Good video. Why use a "lifetime warranty" to replace a crappy faucet with another crappy faucet. I didn't recognize the weird tool under my sink until I saw this video. This video was a big help to me. Thanks!
@albertobucholz7683
5 жыл бұрын
Robert Ruehman Moen is not a crappy product American Standard and Delta are. I started noticing issues with that particular hose a year-and-a-half almost two years ago and I brought that to their attention and every time I called them for a new hose they would send me a couple of them at a time so I didn't need to keep calling them and they said that they were working on redesigning the inside. Moen is a great product so good luck with whatever shitt brand faucet you buy
@MFT069
4 жыл бұрын
Thank you I have the same faucet and am trying to replace for similar reasons
@mccastelo
10 ай бұрын
You just saved my life. I’m off to find that moen and tool on eBay. Thanks!!!!
@patrickturcot8721
2 жыл бұрын
I had the exact same model and problem. This was so very helpful, as I was stuck behind a double sink and limited space. Thanks to your video explanation, I took a pair of vise grips and did it exactly the way you said. Thank you very much for very helpful post!
@eddiepayne8533
2 жыл бұрын
Dude thank you! I got the POS out this morning.
@BestAccessDoors
7 жыл бұрын
Awesome job, Craig! Will you do more videos like this?
@6154alan
6 жыл бұрын
thanks for the video ~ just saved a marital nuclear home improvement war! Now we know HOW to take it apart if we can get the stripped allen screw out to disassemble and replace the faucet. Currently 2 hours into the process. lol
@Supersigma2003
5 жыл бұрын
thank you sir, you save me a lot of time
@Rmfinefragrances
7 жыл бұрын
Wow!!! That was great...I have the same problem...the tool to unscrew the nut under the sink it got busted!!!! So I am going to try what you did....Thank you P.S but away I need it to know the brand as well :) old faucet as well 8 years
@craig1974
7 жыл бұрын
Brand i removed was Moen per the video title. I replaced the faucet with an American Standard faucet which has been great so far.
@floresr32
2 жыл бұрын
Thank. , I have the setup and couldn’t figure out how to remove it. This will same a lot of time. Thank you , thank you.
@keith2096
6 жыл бұрын
I've been working at this for an hour before I found this video. I'm going to try vice grip it.
@fayemontero2158
3 жыл бұрын
This is the best video I've watched today. I'm serious
@ww2ww1fan
7 жыл бұрын
thanks for the video, saved me all kinds of grief
@PMint8
7 жыл бұрын
In the UK you use a basin wrench , it's kind of a open ended tool with a different size at each end to suit either 15mm or 22mm BSP fittings. It's not failed to get one off yet lol.
@paytonsilverman4839
7 жыл бұрын
The problem with this Moen crap is that that washer that holds the water lines up against the nut prevents the basin wrench from turning.
@patrickacox
6 жыл бұрын
I need to know how you got that whole assembly out? I think we have the same one?
@sixgunjohn1
7 жыл бұрын
Thank you brother, I was getin' the dynamite ready.... then I saw your video, the demon has been exorcised!! It does come out without dynamite! Imagine that! Peace!
@MatrixDiscovery
4 жыл бұрын
I just replaced mine. I used a 21 mm deep socket using a breaker bar with extension. It worked to take that bloody rusty nut off.
@josephhuether9572
3 жыл бұрын
Very happy to see that you did not simply pull out your Glock and shoot the faucet...something I was on the verge of doing.
@BTCKYLE
5 жыл бұрын
Nice video craig, ty
@kokomorobotics6110
3 жыл бұрын
Although the vdo is 4 years old, but it is what I need. I am having a heck of a time trying to take the things out. It is still stuck there....found the tool and will give it a try.
@BenWillett2007
6 жыл бұрын
Thank You, Craig !!
@thomasgorman1535
Жыл бұрын
I had a different moen kitchen faucet, which developed the same leak issue. Also, I found that a washer less faucet only means there is a valve part that will need to be replaced more often and much more expensive than washers and seat repair. I've had this moon junk for 10 years, replaced that valve assembly 8 times and eve bought 2 spare units because you never know when it will fail. Also, the cheep sprayer attachment, weak plastic water connector leaked when ever it decided. My Mom's house faucet, over 60 years, same faucet, has needed washers or seat repairs only 4 or 5 times. Did I say, "I'll never moen again." Yes, you can quote me.
@bruceshearer1719
Жыл бұрын
Thank you, Sir... good video
@peaceofmindcre8ions
2 жыл бұрын
How did you get the knob off? Struggling with it.
@Mrs.Silversmith
Жыл бұрын
How did you get the top part off??? We have never done this and have no clue.
@2ntenz
6 жыл бұрын
Thanks for the tips in removing that threaded union.... it was a bear, but it came off as you said
@margaretmedina2964
6 жыл бұрын
Takieng apart sprayer cause water is coming out to slow
@Djpauly_bobo
4 жыл бұрын
Thanks for tip!!
@docsmallblock6584
3 жыл бұрын
I just went through this today! What I did was took off wing bolt things underneath that holds sink plate or whatever in place, then loosened up the top portion of faucet and I was able to lift it up from sink to get a sawzall blade in there and I just zipped it off in 5 seconds! But that was after wrestling with it underneath for a while! Said screw this,went and grabbed the sawzall, Faucet off!
@victorgamboa8198
Жыл бұрын
Tengo un grifo igual necesito desarmarlo para lubricarlo y no se como hacerlo, usted tiene otro video.
@Robg19
10 күн бұрын
Very helpful “thx”
@weijiang5853
6 жыл бұрын
Thanks for the video. I don’t have an install tool. I don’t get what tool did you use to uninstall it?
@ibrake4ants
6 жыл бұрын
Wei Jiang a vise grip. Hope you've already solved your problem ;)
@1RComyn
6 жыл бұрын
I have a Moen and I'm removing it today. It's been nothing but problems and a pain in the ass. Thanks for the KZitem video because I can't find that special tool, Moens gotta go!
@GregoryNash
7 жыл бұрын
Mmm. I had the same symptoms. MOEN's lifetime warranty is for original owner, and that's not me. Mine was slightly different. Thanks for the suggestions. I cut mine MOEN out with bolt cutters. Like you said, "It made me very happy."
@susansosko1180
7 жыл бұрын
they supply the tool now, with a replacement faucet. I just got one.
@bluwng
2 жыл бұрын
What did you buy and was it a drop replacement?
@craig1974
2 жыл бұрын
An American Standard pull out faucet. Still is perfect.
@redneckbryon
7 жыл бұрын
You know Moen has a lifetime warranty, you could have potentially contact the manufacturer and got a replacement part.
@bufallobiff
7 жыл бұрын
He won't get that kind of customer service with American Standard. He destroys a Moen faucet because he's not competent enough to remove it properly. Then he bad mouths the plumber for leaving that tool with him. What was the plumber supposed to do with it.......add it to his collection ?
@craig1974
7 жыл бұрын
I did not know we had the tool until after i installed the new faucet. I was cleaning below the sink after the install when i found it. I can care less about Moen's warranty. The faucet was problematic, and i was not going to call customer service for another flawed part. The new American Standard faucet is awesome so far.
@shawnsisler3743
7 жыл бұрын
Good luck getting Moen to uphold their warranty. I have one and the handle is leaking, it's 4 years old and they are claiming it's user issues. They wiggle out.
@ParanormalNormalcy
6 жыл бұрын
Replacement parts are as faulty as the original parts. Bad design with this one.
@bgregg55
5 жыл бұрын
@@craig1974 so which american standard faucet model is performing better?
@randomrazr
7 жыл бұрын
moen usually makes good faucets
@johnhurt888
7 жыл бұрын
i have the same problem, they sent a replacement, and a couple years later, it leaks again. we now have mold under our sink. Moen sucks! i bought a hansbereger(sp?) from costco, will try that out. can't be worse. moen already ruined my kitchen island with mold.
@MrJGOVEAS
2 жыл бұрын
I have the same issue. I do not seem to remember the model number of this Moen unit. Anyone know what the model number is of this Moen unit?
@TanyaJoosten
5 жыл бұрын
I have the same faucet and same problem. I am trying to replace. I don't have the metal threaded piece. Has anyone else ran into this?
@dopeyjake
2 жыл бұрын
were you eating while you made this video?
@bluwng
5 ай бұрын
My locking nut is rusted shut I need help.
@GenerationYoga
3 жыл бұрын
Thank you
@dananderson6632
5 ай бұрын
Does anyone know the model of this faucet ?
@steveherzfeld1327
4 жыл бұрын
Thank you!!! Add me to the list of people who this video helped!!!
@nickfina6184
3 жыл бұрын
My hero
@StreetWorksMedia
4 жыл бұрын
I just spent the past hour removing one of these without the tool and the nut was rusted in place. Ended up doing what he shows in the video but then I took a hacksaw to that pipe that was frozen and threw it all in the trash. The thing was rusted inside and out. Piece of junk.
@user-rb1vq7jz3q
Жыл бұрын
AWESOME!!!
@Papalegba22
3 жыл бұрын
Moen is one of the best in the market
@hashtagjustadad5110
4 жыл бұрын
This might help one of y’all. I did not have the tool to remove an old omen faucet. I ended up using a spark plug socket. I removed the rubber insert from the socket and it worked perfectly.
@rightsideofthegrass8114
4 жыл бұрын
Why wouldn't any deep socket work? The nut is probably 3/4" 7/8" right?
@hashtagjustadad5110
4 жыл бұрын
Rightsideofthegrass because of how the deep socket is built, it does not allow the bolt to go all the way down. A spark plug socket is limited in depth by the rubber grommet which is removable. A traditional deep socket is wide enough for the nut but tapers down and therefore the bolt will not fit. I hope that makes sense.
@rightsideofthegrass8114
4 жыл бұрын
@@hashtagjustadad5110 Thanks. I installed mine more than 15 years ago, and believe it will need replacing soon. The cone/collar under the handle will not stay positioned. I looked under the sink, "How did I ever get than on, and how will I ever get it off?" When I saw some videos and saw the installation tool, then I remembered. But, I was 99.999% sure that tool was long gone, so was looking for another way. I decided to do some looking in my workshop, and, ... I found it! It is labeled, complete with date! So, I can use it and will not need a socket. As a side note, I didn't think a spark plug socket and deep socket were different. But, I don't think I have looked at them in that way. I have a couple of different sizes, so will examine them closely the next time I have my tool boxes open.
@albertobucholz7683
5 жыл бұрын
Also they did redesign their hoses you just can't see it visually. It's not that hard to pull those faucets out I can pull that out in under 5 minutes but you know I'm a plumber
@jerrypierce8965
5 жыл бұрын
Most Moen faucets have a life time warranty on their (most)stuff. No labor but they send you the stuff you need for free...no shipping either. I'm not sure this guy got that kind of warranty on his replacement. Moen makes good stuff and stands behind it. I'll buy Moen every time. I hate to hear folks bash on a company with no more info than that. Replacing the hose would have been easier than the whole faucet and if it was done before all the leaking and corrosion it wouldn't have been hard to do. I wonder how much it ruined the cabinet and flooring before he really got to fixing it.?
@RonGay58
2 жыл бұрын
Stay away from Moen. I'm trying to install one now and the idiots left out the mounting plate and brass nut & washer to mount, called costumer service and was told to wait 3 days without a kitchen sink due to buying their $200 faucet from them. If I buy a 3/8th s nut to replace it, it voids my warranty. Somehow they think its my fault their to lazy to check the box before shipping.
@R0dan
5 жыл бұрын
I have had nothing but trouble with my Moen faucet also. Absolutely hate that brand!
@FF-xl7yw
5 жыл бұрын
You spent several minutes explaining the problem while your title is about the removal. It doesn’t really matter why the issue arose but show us directly how you remove the Faucet.
@donturner3239
4 жыл бұрын
I took a Sawzall and cut it off at the deck
@bobluttrell4731
7 жыл бұрын
peerless kitchen sink sprayer
@bgregg55
5 жыл бұрын
yes, it's ridiculous to have to replace the cheap quality plastic hose every couple years & even worse have a leak under the sink that ruins the cabinet & the flooring. thx moen.
@albertobucholz7683
5 жыл бұрын
Do you realize that all you have to do is call Moen because they have a a lifetime warranty... They'll send that out with no problem instead of putting buckets and bitching about a Moen product call them and take advantage of their fantastic warranty. Good luck dealing with American Standard parts and warranty
@1bottlefed
5 жыл бұрын
The Renzo is a piece of shit! When I was putting it in for a client I looked the tiny o-ring at the base where the unit swivels and said how long is this supposed to stay in the groove? Sadly I was already a hour drive to replace it so I crossed my fingers....fast forward 3 months and its popped out of the groove. Sure I could get another POS Renzo oring for free but what's the point its going to fail as quickly as the original as its way to small to be held captive under pressure and flexion while in use.
@shanemayberry8092
5 жыл бұрын
Jesus Christ take forever for zero helpful info
@michaelbaryo3826
2 жыл бұрын
Bro, we don't need your life story. Just details
@craig1974
2 жыл бұрын
Well if you watch the whole fucking video you would have details.
Пікірлер: 115