You've done a great service with this free "how to" video sir, thanks a ton. Takes time, $ and energy to produce a video like this 🤝
@gmans7859
6 сағат бұрын
Cool Thank You. Will try next time. Have an Old Ignition Wrench set in the box that never see's daylight. Miss you Grandpa.....
@user-lm8fg9eo5n
Ай бұрын
You made it look easy..thanks for your help. Saved me tons of frustration.
@pablogutierrez1009
Жыл бұрын
Thank you for a very practical easy to follow presentation. Two thumbs up. All the way up.
@buckshotbeulah
19 күн бұрын
That little wrench is an ignition wrench for working on older vehicles.
@tonyrobinson1623
2 ай бұрын
Grind the wrench down on it's front edge so it is more wedge shaped. That will make it easier to get under the tab.
@seekter-kafa
4 ай бұрын
actually you need to buy like 100 of them (not expensive, various kind in a set) and then you can force them out, cause either way, once used, they never hold so tight like in first pop
@x-man5056
7 күн бұрын
Your wrench is from an "ignition wrench set". I have a set that is very similar that came with my Dad's boat he bought in '62. If you put a partial bevel on the open end of the wrench (it will still work as a wrench), and a slight bend you won't need the screw driver. Or you can buy the right tool for $5 at Harbor freight if you are going to be doing this a lot.
@akocbibbo
10 ай бұрын
thank you for posting this! been frustrated on trying to find a good how to video
@samartz
10 ай бұрын
Very good simple quick vid, cheers!
@gordonpritchard9499
9 ай бұрын
Thanks cobba much appreciated from Braidwood NSW Australia warmest regards Gordo
@Aesir5
25 күн бұрын
That's a good tip 👍
@timberwolfdtproductions3890
18 күн бұрын
That would be an ignition wrench. Good idea.
@rfarevalo
10 ай бұрын
Better to get the $9 automotive fastener removal tool at the hardware store. So much quicker :-)
@Workerbee-zy5nx
21 күн бұрын
Swiss knife also works.
@CementHead2175
28 күн бұрын
I have a 2019 Ridgeline, with 55,000 km. Went to the underside of the engine/transmission area, and had to remove plastic covers to get into the work area. I was familiar with the plastic “pins” on other vehicles so I went out and bought a set of plastic tools. Wrong… I ended up destroying 50% of the pins, because the “plunger” portion of the anchoring pin had become filled with road dirt and sand. I would have been better off, cutting them off with a side cutter and popped new pieces in (which I had to get anyway)! Come on Honda… I know you can do better.
@reneeseaton3889
5 ай бұрын
Great tip!
@Nam3Iess
8 күн бұрын
I have the opposite issue. I try to install mudflaps on my car and it was a smooth sailing until the last one of the stupid things. I killed 30 minutes and it just does not go in and it made me so angry that I had to stop, otherwise I would break the clip or the bumper LOL.
@trinkabuszczuk6138
28 күн бұрын
I bought a set of these trim tools the other day, there are about four or five of all different sizes: $23. Just in case you haven’t got an extraordinarily thin spanner. 😂
@Kharumlong
11 ай бұрын
Thnaks🎉
@tonitalks1212
6 ай бұрын
Thank you so much
@papagary1779
2 күн бұрын
When was the last time he cleaned all the dirt from the engine bay
@manuelaragon4499
2 ай бұрын
excelente truco saludos
@VietBuffet
5 ай бұрын
I'm wondering whether I can drill right into the middle of the clip and remove it. For some reason, the enter head was gone (I bought the car used) and I don't have a way to pull it out. Thank you
@kb3svj
20 күн бұрын
Slick!
@BBQRadish
7 ай бұрын
Thank you
@hubsun700
25 күн бұрын
Without tools proceeds to use tools haha
@Pro1er
24 күн бұрын
Ignition wrench.
@dennismeunier1473
Ай бұрын
Or you could just use a fork.. might have to cut off a prong to fit properly, but easy peasy! Keep one in your toolbox dedicated for body clips.
@donaldwayne4219
6 күн бұрын
A fork, why didn't I think of That? Ideal shape too I would think, thanks
@rugershooter5268
Ай бұрын
Hmmm....I got the "proper" tools, but now I know to best use them on those &&*^&*%( things........I might sharpen a wrench
@DocHolliday3841
Ай бұрын
I'm struggling with this BS right now under the car
@henkmeiring01
3 күн бұрын
Simple things like this show car manufacturers dont care .You can have best technology,electronics,engine,transmission,paintwork; if i see those plastic pieces of xxxx it cancel it all out
@squirrelcovers6340
27 күн бұрын
Just use the tool that's made to remove them😩
@gunguy8348
2 ай бұрын
Those suck Nissan is the worst even with the tool the still break and fly everywhere
@stevenwells8921
Ай бұрын
Just use a fiber rubber trim removal toll, they come in a kit!
Пікірлер: 37