Dennis thank you so much. I saw the tab and damn near broke the whole thing off out of frustration. This is a cheap poor design. Thanks for taking the time to make this video!
@nobodysmoove
2 жыл бұрын
You have the first explanation on how to get that out. THANK YOU FOR SHARING!
@homlar
2 жыл бұрын
You sir are a god send! This is a perfect KZitem video! Gets to the point on something the manufacture does not address at all.
@rsenei4609
2 жыл бұрын
For my Whirlpool freezer (model WRX986SIHZ00) I put a medium-sized flathead screwdriver UNDERNEATH the tab. Pry it up by turning the screwdriver back and forth. Pry it up a bit and then push the screwdriver deeper and twist back and forth to pry it up a bit more. Then grab the front with your fingers and pull it up-and-out. Should require gentle force. Keep twisting the screwdriver underneath and work it in deeper until it you can pull it out. Did not damage the little clip this way.
@pegpoole5322
2 жыл бұрын
With how cheaply this refrigerator freezer is made I'm surprised you didn't damage it. LOL I have the same model. Poor design.
@odszza
3 жыл бұрын
Very very helpful thank you so much
@cedrickhoward7944
2 жыл бұрын
Thanks it helped me out alot
@goldiebelle
3 жыл бұрын
Yes!! Thank you!!! My husband almost broke our fridge trying to remove that XD
@lpiquette426
3 жыл бұрын
THANK YOU this video was a godsend!
@mggilbert425
Жыл бұрын
Thanks for the video. Two lessons I learned that weren't mentioned: a) in order to properly have the bottom bin reinstall properly you have to feed the back end especially deep, and make sure the downward "hooks" actually grab the metal slider from behind. Otherwise it won't align / sit properly. b) it's easier to install the bottom bin BEFORE reinstalling the door, because the bin has a front lip that has to go under the door lip, and if the door's already in place, it's hard/impossible to reposition it. Also, I'll reiterate the simplicity of just removing the right tab and then angling the top drawer to remove it, saving the hassle of taking the left tab off. : ) BTW, here's one with slightly better angles: kzitem.info/news/bejne/xaiolmeXg6CAjag
@sandragoertz9584
3 жыл бұрын
How do you get the slides from the sides to the slides on the refrigerator?
@dennisarmstrong7877
3 жыл бұрын
I'm not sure I understand the question. Do you mean the upper basket or the lower main drawer slides? Do you want to know how to take them off or put them on?
@MrMarkpeggy
2 жыл бұрын
@@dennisarmstrong7877 I'm not the one that started this question. I would like to know how to get slides for the drawer out.
@dennisarmstrong7877
2 жыл бұрын
I believe on this one, you just press the tabs once the bins are out. There may be a screw in it, but I don't think so on this one. Push the white tab in about the center of the slide with it pulled out and pull it out the rest of the way. I hope this helps.
@forestbroz4549
3 жыл бұрын
film with the phone sideways to get a wide video, i can barely see whats going on... thanks
@pegpoole5322
2 жыл бұрын
I can't really tell what you're doing from the angle of your phone.
@Wyonative08
2 жыл бұрын
Video is shaking and can't hear a darn thing you're saying!! 😤😡
@dennisarmstrong7877
2 жыл бұрын
I'm sorry. I hope it helped a little, though. I had a hard time getting it filmed. This is really a 2 hand part removal.
Пікірлер: 18