The standard issue double passenger seat is held in with 5 x16mm bolts. The front, outside one through poor design is open to the elements underneath so locate it, clean it with a wire brush, WD40 top and bottom and then give it some welly! Or, you could use an impact wrench.
The fourth bolt hole is not used by the twin seat so the rubber flooring will probably cover it. Locate it by feel, poke a nail down into it and then use that hole as the pilot to drill out the rubber.
When returning the bolts, use lots of Copper Ease. This can was in the garage from my biking days - it even still had 30-year-old fingerprints in it. Once it's on the threads, the bolts can be tightened with your fingers and I've never known them seize, ever.
Негізгі бет Автокөліктер мен көлік құралдары Renault Master - replacing the twin passenger seat (no commentary).
Пікірлер: 10