i had no idea what i was in for reading the comments before the video started. but buddy Dave has got a gift
@davidschmidt5533
6 жыл бұрын
"And if we damaged the clip at all installing it; we need to get a new clip." Right away im thinking do not damage the clip! 6 years later and you are still having new views. Congrats, thanks for the knowledge.
@brendanmackenzie6834
8 жыл бұрын
thank you so much man!!! was able todoa new chain and sprockets by myself for the first time
@nickicruz3658
6 жыл бұрын
Thanks lot for the technical info and replacement guide. Fantastic video & this is helpful.
@LGR_LGR_LGR
6 жыл бұрын
Now dave wants me to buy him lunch! Great video guys!👍👍👍
@colmf7484
9 жыл бұрын
Does it come with a buddy Dave or do I need to purchase it separately
@awesomehonda7384
8 жыл бұрын
That made my day.
@STAFFIHOUND
7 жыл бұрын
Motion Pro makes a nice tool that you can't see...
@glock1inthetop45
5 жыл бұрын
Northwest Aerial Photography these guys didn’t get the joke 😂
@exige265
5 жыл бұрын
STAFFIHOUND 😂👍🏻😂
@quentinvandenborre7245
7 жыл бұрын
thank you very much for the tuto. -From France ;)
@arbormac2373
7 жыл бұрын
This may have already been answered, when my buddy Dave has done his job, can I just tie him in the backyard to a tree? How long do they live? Or should I take him to a Buddy Rescue service? Anything helps!
@bobriley000444
Жыл бұрын
If you use a spacer on the front sprocket you should be using the same thickness spacers on the rear sprocket and chain guide as well so everything stays aligned
@coltondrane7654
9 жыл бұрын
Does my buddies name have to be Dave for this to work?
@rylomccloy6928
9 жыл бұрын
Yes if you don't have a buddy Dave you cant do it
@coltondrane7654
9 жыл бұрын
Rylo Mccloy Thanks!
@codycasteel25
5 жыл бұрын
@@coltondrane7654 You can buy one here... www.ebay.com/itm/A-Man-Named-Dave-A-Story-of-Triumph-and-Forgiveness-by-Pelzer-Dave-/264029547799?_trksid=p2349526.m4383.l4275.c10#viTabs_0
@optimus9777
3 жыл бұрын
I live in México mi amigo "David" is ok? Thanks
@herbertbirkley5074
2 жыл бұрын
Loooool 🤣
@loggerhead837
9 жыл бұрын
I went on motosport and typed in my bike model and searched buddy Dave, but nothing came up. Now how do I change my sprocket?
@thelzmovement6480
8 жыл бұрын
found mine on ebay
@georgewashington5365
9 жыл бұрын
Before posting any "Buddy Dave" jokes, look below it has been done.... over.. and.....over..... and..... over.... and.... over.......
@codycasteel25
5 жыл бұрын
Your comment makes me want to post another one even though I had no plan on doing so
@davewatson7070
7 жыл бұрын
An excellent demonstration video that didn't drag on for ages on like like some 'how to videos'. If I can offer some constructive criticism, there are a finer few of points that I think were left out or not quite correct; (1) There was no reference to the checking the bikes manual for the correct torque rating on the rear sprocket nut/bolts (i.e 34nM on my 08 KX128 - may vary for other bikes). (2) When using Loctite, avoid putting the tip of the Loctite nozzle on the metal thread when using the product - this is what causes the Loctite to set hard in the nozzle. (3) There is no point in using Loctite thread locker under the tapered Allen head bolt - this will achieve nothing (except wasting the Loctite) (4) On Suzuki and Kawasaki the cir-clip should be replaced every time the sprocket is removed/replaced.
@AaronMartinCOOLVIDEO
5 жыл бұрын
Nice I did not know you guys had a KZitem channel.
@desertbootguy
7 жыл бұрын
What do you put behind the clip on the Suzuki engine to prevent it from moving ? I just can't understand . Thankyou so much.
@emeuanmckinnon05
9 жыл бұрын
Where can I buy a buddy dave?
@crazzyzack
10 жыл бұрын
thanks for the ad vice this makes installing a chain on my pit bike esaer.
@thomasmcdonough5554
10 жыл бұрын
Does anybody have a buddy dave for sale
@theforester_
8 жыл бұрын
thanks from brazil
@jabbac56
10 жыл бұрын
i dont have a buddy named Dave. what should i do. someone please help.
@motoxwade2246
6 жыл бұрын
jye coker yea
@tommyanderson6112
6 жыл бұрын
put in in gear
@ibexmoto6184
8 жыл бұрын
Where do I find a buddy Dave? Do I need one of them for the install or what? Please someone answer me I'm confused!!!!
@scuddro
8 жыл бұрын
Your bike didn't come with one? You can get them pretty cheap used. Just make sure that you get one that is OEM spec. Those Chinese made ones don't last.
@ibexmoto6184
8 жыл бұрын
+Scuddy P Okay I went to the dealership and they only have buddy johns in stock for $39.95 They can order a buddy Dave for $79.99 plus shipping. But I found a nicely used one on eBay for $55 The guy said he keeps the fluids changed and hasn't had any leaks or problems with his buddy Dave. So I think I'll go with the eBay one, he accepts returns too so i can always send it back if it doesn't work. Thanks for the recommendation! It helped a lot!
@scuddro
8 жыл бұрын
+iBexMoto $55 is a good deal. Glad it worked out for you. the best thing about them is you can bring them to the trail/track and just leave them in the car. Then it's always there if you need it. A PBJ and some milk is all I've ever needed maintenance wise with mine. They pretty much take care of themselves. Especially if you get a good used one that has already been house broken.
@ibexmoto6184
8 жыл бұрын
+Scuddy P Yeah the one I got looks to be in like new condition. The guy said he used to take it to the track with him all the time and it never let him down. I'm glad we discussed this ordeal in the comments. It really helped me out and I hope it helps anyone else out who is having trouble finding a a buddy Dave. 👍👍👍👍
@lilfresca
8 жыл бұрын
I got a buddy John with my 2015 Kawasaki 250f for 89.99 he helps with everything best purchase besides the bike itself
@sanesaint8725
3 жыл бұрын
I got the new sprocket that cuts out mudd one side of the tooth is flat the next one has a groove on the other side and vice versa all the way around
@fjones63
6 жыл бұрын
I got a 525 chain for a V-Strom 650 and could not keep it adjusted. Renthal chain and it stretched everyday, driving it back and forth to work. 50 miles round trip. I don't wheely so no excuse for the poor performance of that chain. Put a DID on and problem solved. Adjusted a little at about 5,000 miles and 30,000 miles before replacing.
@JakeElston
9 жыл бұрын
Don't forget your proper adjustment. 11:15
@jonathanoxlade4252
9 жыл бұрын
+Jake “BlueMaTRiX86” E when you see how these bikes are build they put zero loctite even blue is plenty for puting the engine together i sugest using 246 tho it can deal with heat and oil
@rarler3333
5 жыл бұрын
Yet, somehow this video is a demonstration of a chain alignment tool. www.rockymountainatvmc.com/p/1788/17145/Motion-Pro-Chain-Alignment-Tool
@EnduroJSSwe
8 жыл бұрын
Nice video! :D
@olevik23
11 жыл бұрын
have ordered Rear Sprocket for Dirt Bike. It's a yz 85 2007. but after I had ordered it so I run as standing on the dirt bike. there were 4 gear bolts. and the run I ordered was six gear bolts. but it says that it is the yamaha yz 85 2007
@meeetallicaaaa
11 жыл бұрын
okay... i have a bike with a drum brake and for the sprocket theres an attachment that when the wheel axle is removed the sprocket comes off and there are these four rubber pads that cushions when you shift. what are these? please help they need replaced.
@janothebird4878
9 жыл бұрын
nice video, i did mine yesterday, it take 1hour :p !
@sanesaint8725
3 жыл бұрын
A regular chain breaker will push that link right on
@shagonwagon01
10 жыл бұрын
Do u have to use that lock tite on you rear sprocket nuts and bolts or could you get away without using them
@rexstonbull250
8 жыл бұрын
when i sit on the bike after the sprocket kit is fitted the chain tightens i got about 3 links of the chain and I'm out 5 notches on adjustment is that right ?
@jdozajr6396
9 жыл бұрын
No grease or lube required on the countershaft sprocket before installation?
@a4wong
11 жыл бұрын
I hav a wr450 11 and with a supermoto tires, can u suggest a chain I could use which is slim enough to have clearance for the tire, and still strong. I can't ask my buddy Dave as he doesn't ride and gets high all day..
@sanesaint8725
3 жыл бұрын
I got lock nuts for mine the kind with the plastic inside the nut
@Jake.Rose.
12 жыл бұрын
should you do a star cross pattern when your tightening the rear sprocket on?
@Enduropnz
7 жыл бұрын
I have a chain of rental R3, and I broke the lock on it, but it was all installed correctly, the lock was about 70 Moto-hours, new Gear: front - rental 13, rear Grosskopf. Motorcycle ktm exc 300. Well that is when the chain fell off, the speed was about 20km/h and the engine is not much affected. Who is to blame and what to do?
@kyleprocon9809
4 жыл бұрын
Perfect, I have a friend named Dave
@robcelendano2963
4 жыл бұрын
Hey, that guy can barely see over the seat...Hahahahaha! Sorry Jay, had to pick on 'ya buddy.
@sindreandreandersen5815
10 жыл бұрын
Can i loan your buddy dave LOL
@Maibu-OReiley
11 жыл бұрын
where do ya get the tools ya got, those alan type key wrenches would come in handy for the garage i work in :D
@Cr33pyKitty
4 жыл бұрын
damn i need a buddy dave!!
@teamrasta1
11 жыл бұрын
i don't have a friend dave. forever alone.
@daviddaavettila2814
11 жыл бұрын
what if you are dave?
@dirtbikerider150
11 жыл бұрын
will having fresh chain an sprockets increase acceleration power ?
@heck7807
3 жыл бұрын
How close is this Renthal Red Color to the ZETA Red ????
@TheGhillieghost19
11 жыл бұрын
could you take the back tire off and then have Dave hold the tire?
@ProvisioNet
8 жыл бұрын
Great video however that was entirely to much Loctite that you used. Really just a tiny 1/2 drop.. just enough to coat the threads is all that is needed.
@Belicose777
8 жыл бұрын
What was that that you put on the axle? Lubricating grease?
@mikeytuns
7 жыл бұрын
Belicose777 More then likely
@Martins2012
7 жыл бұрын
That reed sprocket looks freaking awesome! where can I get one? For a honda CRF 250 rally.
@sanesaint8725
3 жыл бұрын
Try ebay
@SamTurner843
7 жыл бұрын
What about the chain guide I put this sprocket on my bike and it is too big it hits the chain guide
@bryanbaker5942
11 жыл бұрын
I'll never be able to do this job since I don't have a buddy named Dave. Will a Matt work in place of a Dave?
@CaspersSVT
7 жыл бұрын
You spent like a min explaining how to and bs about the chain. But Didn't mention once HOW to remove rear wheel. Went from unlinking chain, loosing sprocket then cut to the wheel being off??? Just saying for DIY people that's a severe lack of info., no?
@mikeytuns
7 жыл бұрын
Christopher Connors I can see what you're saying, but it's not hard to figure out that you just have to take out the rear axle lol.
@thelzmovement6480
8 жыл бұрын
what if I don't have a "buddy Dave"? I checked some websites an they don't sell them or have even heard of them
@thelzmovement6480
8 жыл бұрын
never mind, just found one on ebay
@bigboi6578
8 жыл бұрын
how much was he?
@thelzmovement6480
8 жыл бұрын
ReFz crypto 49.99 with free u.s. Shipping
@bigboi6578
8 жыл бұрын
R.A.S. Tactical i mean buddy dave yea
@thelzmovement6480
8 жыл бұрын
ReFz crypto dont waste ur money, the bitch broke within the first use
@bjones870
10 жыл бұрын
See, I bought the chain and sprockets. Now I just need to invest in a buddy named Dave. Crap.
@noelmarte2835
9 жыл бұрын
Can I make 2011 crf450r engine run with a carburetor?
@alejandropalmaguzman4240
9 жыл бұрын
please, can someone tell me wich is the recommended torque to tighten front sprocket (says the 9:55 minute, but i do not understand). it is to Honda. Thank you.
@jgior6987
9 жыл бұрын
+Alejandro Palma Guzmán 23FOOTLBS
@ApexIXMR
8 жыл бұрын
So I just got my Renthal chain and sprocket and I checked the box contents, but there's no Buddy Dave. What gives?
@300blkaac
7 жыл бұрын
What socket spinners do you guys use?
@FlexinJump
9 жыл бұрын
guys get this for your bike compared to your stock ones. feels so much better!
@pulpanochamaster
5 жыл бұрын
what brand is your chain tool?
@dennymambo
5 жыл бұрын
Awesome video, cheers dude! That spacer washer behind the front sprocket when going from a standard chain to an (slightly wider) O ring one is a perfect example of why I'm a KZitem mechanical video slut hahaha. It's not a big thing, but it's something the majority of people would not have considered until the chain has rubbed big honking butt-ugly gouges into the crankcase. Stuff the cat videos, this kind of content is what makes KZitem gawddammit! ;p
@mxkid677
6 жыл бұрын
Any body else notice that both the chain, and both sprockets were brand new before he put the new ones on...
@tannervadeboncoeur9732
11 жыл бұрын
What do you use for chain lube?
@SaveMeSteak
11 жыл бұрын
those chain and sprockets were still like new. why put these new parts on? only reason i would is for the color and they i guess are not supposed to wear out
@gforcemedia258
8 жыл бұрын
Will this technique only work if you have a buddy named Dave helping?
@Unknown-we4rk
8 жыл бұрын
😂😂😂
@evanstubbins3883
11 жыл бұрын
yes
@cherokeevlogs1163
8 жыл бұрын
hey can I use a crf230f Honda 2016 for a beginning in Motocross
@davidmccarron3516
8 жыл бұрын
+CherokeeVlogs I don't recommend it because they have different gearing than race bikes and they also can't rev as high and race bikes have powerbands. I wanna build a 2016 CRF450R but I hate that race bikes blow up so much
@rexstonbull250
8 жыл бұрын
if your starting i would recommend a yzf 250 a very easy bike and very comfy 2 strokes need a lot m,ore maintenance than a 4 stroke .
@WuMaster4
11 жыл бұрын
i have a 42 rear sprocket, what chain should i get anyone?? sorry if i sound dumb
@srgfluffypeaches69
7 жыл бұрын
Do you need a renthal chain when you have renthal sprockets?
@sprayandpray1232
7 жыл бұрын
srgfluffypeaches69 no you can use whatever chain you prefer
@srgfluffypeaches69
7 жыл бұрын
braapstar 311 Thank you. I was told you needed a renthal chain for renthal sprockets.
@fauzansaid7697
7 жыл бұрын
mantap
@MikelOyengo
7 жыл бұрын
Considering it'll get compressed/stretched when bike is off the stand - that chain looks waaay too tight
@jsfetters
6 жыл бұрын
You said in the beginning of the video that you would explain why you chose to change the gearing. You did not explain why you chose to change the gearing.
@susannejosefsson2201
10 жыл бұрын
whats the red thing he puts on?
@DerTechniker
10 жыл бұрын
on the axle ? its some kind of grease
@nhfoos
11 жыл бұрын
WD-40 is a cleaner.....not a lube.
@MRBL-gf4lg
3 жыл бұрын
I don't have a buddy Dave...
@johnrobinson3640
8 жыл бұрын
I have a buddy dave who helps me with my bike too lol
@TheBombdre
11 жыл бұрын
Can you use WD-40 for chain lube?
@amstelpils5334
6 жыл бұрын
Nnoooooo
@reeceturner8310
7 жыл бұрын
can you get that sprocket for a crf250l
@sprayandpray1232
7 жыл бұрын
reece turner yes
@thegopedrider
11 жыл бұрын
What if you don't have a buddy Dave
@wacko234456
9 жыл бұрын
never put thread locker on a steel bolt that goes into aluminium, when you go to remove them a year later you will strip out the thread on the aluminium
@Fellafoe69
2 жыл бұрын
He put it on a nut and bolt and im sure its steel
@MPMLLC178
9 жыл бұрын
What if I don't have a buddy Dave, can I have my buddy Carl hold the brake down
@ultimatehotrod
11 жыл бұрын
wat if we dont have a buddy dave =(
@Wyette-3400
9 жыл бұрын
What if my buddy isn't named Dave
@jerrywoods2524
7 жыл бұрын
Can we get Dave's contact info so we can do ours?
@1977HUSKY
4 жыл бұрын
There is no sound!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
@lukey12340
11 жыл бұрын
haha what a question!!
@loganhissong2941
8 жыл бұрын
what if we don't have a buddy named Dave
@charlesrobb8616
8 жыл бұрын
can't do it then sorry bud
@ShemoStudios
11 жыл бұрын
I don't have a buddy dave :(
@ArizonaDesertRat426x
10 жыл бұрын
Hunter Hutchison Then you're probably riding a 230
@stephentylerboniella6224
11 жыл бұрын
But i dont have a buddy named dave:(
@cryaboutit1890
6 жыл бұрын
GREAT! I DONT HAVE BUDDY NAMED DAVE!
@baddrew1011
11 жыл бұрын
nonononnonononono, it might work if you run out of lube once or twice, but don't use it all the time. Real chain lube wont come off under regular riding conditions and it's just a whole lot better for your chain
@brettb8706
5 жыл бұрын
ya right my shit keeps coming loose. im gona weld the MF on there
@isaiahsmith211
7 жыл бұрын
im not riding today because my dad wont help and mu cousin is rushing me and he doesent live in the same city and we never ride together and my cain needs to be installed so fml
@IAMSKILLZ24
11 жыл бұрын
What if you dont have a buddy named dave? Lol
@lukepaki7231
5 жыл бұрын
Like n sub Thank you😃
@johnc4642
5 жыл бұрын
i get money every time i say motion tool
@danmiculici5629
11 жыл бұрын
then you cant put on some new sprockets, sorry.
@nickhernandez1773
5 жыл бұрын
Dave, I'm sorry. But you made this video! Lol you are so under paid.
Пікірлер: 152