what camera did you use for this video? the quality was great!
@frederickjohnson4241
3 жыл бұрын
Great breakdown. I just bought an 8 channel system. This is going to totally help me out on my install.
@rasmaven7271
3 жыл бұрын
. I noticed early in the clip the coming car in background disappeared then lights show car off screen after crossing view. When you plugged the cameras into the NVR the video stream was smoother, car flowed no skipping. Compare 7:43 & 11:17 car crossing view. Great video. Haven’t seen another as detailed like this.
@davidreed8268
Жыл бұрын
I understand that the RNL8 will work with my Swann 815 cameras..I currently have a Swann 7300 NVR and it is terrible, to say the least. My biggest complaint is the playback capability of the 7300 - very hard to use, and the playback program freezes frequently. My question for you is regarding the playback on the RNL8.. what has your experience been? I'm considering getting one of these to replace the 7300, I'd love to hear your feedback. Thanks.
@matthewnoecker5062
3 жыл бұрын
when you restored the cameras you put them back to factory defaults including the default passwords (not good) all you had to do was put in the proper password into the nvr
@shaysando
3 жыл бұрын
Can it support third party camera , onvif or rtsp?
@GearheadOutlaw
3 жыл бұрын
Good thing about the power brick is keep the heat generated outside the NVR? Regarding the port/channel assignment as I found out that you can pull all camera out the ports and insert each camera you want one at a time and wait a little for it to get picked up.. That's the case anyway on my 16 channel unit.
@BrianThomas
2 жыл бұрын
Great job with the review. Thank you very much. I've seen a few videos where someone would say that my NVR picked up my other cameras on my network that I already have connected. I'm wondering if folks are putting cameras and other devices like IOT, phones, laptop tops, game console, etc... on one large LAN ( local area network) which isn't the best way to setup your network. You're video traffic (as well as other things like IOT) should really be on it's own separate VLAN (virtual local area network) in order to help with a number of things such as to aid in security, network congestion, logging, and it just adds good house keeping when things don't work like they should.
@baldvale5418
2 жыл бұрын
Hi that was a really interesting video and thank you for posting it. Can you please tell me does the Reolink NVR work with the Reolink wireless wifi camera's please? Thanks in advance.
@mitchnagel8909
3 ай бұрын
with the NVR do you have to connect an external minitor or can you acces it thought a web browser
@IanM2698
3 жыл бұрын
Really great review thanks
@thomasstatham8246
2 жыл бұрын
Do u have any reolink nvr videos on updating the firmware. I just bought the RLN8-410. I'm assuming that one records 4k. I also bought the RLC 811A 4k cameras.
@envidjunkie
2 жыл бұрын
Minor nitpik: your 2U shelf is installed upside down... lol
@huutrinh1347
2 жыл бұрын
Thank for your review..! What is the input voltage of Adaptor? Can I use a power supply with 220V-AC?
@TechOut
4 жыл бұрын
You need to play with Ubiquiti stuff. You would love their networking and protect stuff.
@ohMY03
3 жыл бұрын
Thanks mate new sub very informative also you’re thumbnails made me smile 😀
@joeydelmarsjr.646
Жыл бұрын
if the reolink nvr has only 8 poe port? can i used an external poe and have 20 cameras on the poe switch and use a single cat6 connected to the nvr and still view my 20 cameras?
@AnthonyPearson4JesusofNazareth
2 жыл бұрын
thanks
@alfafa2004
2 жыл бұрын
Please post video about "Connection failed" message when trying to view video cameras on android phone. thanks
@temitayoafariogun7784
Жыл бұрын
What happened when you have 4cameras and you have 8 channels nvr so when you installed,one of it won't show on the 4 camera except you put the screen on 8 division
@mrmarcus6138
3 жыл бұрын
I have a system for about 3 years that was non brand and now I have a reolink 8 channel with 8 cameras I was thinking of putting the Western Digital 4 terabyte hard drive I have in the cheap system in the new reolink nvr should I just take it out and put it in the new nvr and that's it ,or is there something more I would have to do, Thank you your videos very helpful
@GeekSmart
3 жыл бұрын
You should be able to , just would have to use the app to format the hard drive so it can be used with the Reolink software. Maybe Ill do a video about changing the hard drives in the NVR...
@mrmarcus6138
3 жыл бұрын
@@GeekSmart awsome please make a video about swapping hard drives in a nvr when you upgrade your survalence cámara system...in my case ,reolink brings a 2 tb Toshiba drive,so I'd rather have my western digital 4 tb purple hard drive,so my ordeal along with a million other people,go thu the same thing so a video on putting your badass hard drive in your new system would be a winner in my book,thanks ill stay tuned brother..💯💯😎🤙
@daveparker7207
2 жыл бұрын
@@GeekSmart please make that video. 4k eats up hard drive space. thanks
@pwelsheimer
2 жыл бұрын
Pro Tip: External power supplies decrease heat inside the actual unit for less operating temperature inside the enclosure
@4TECHGAMER
Жыл бұрын
Like which ones?
@chuy0720
Жыл бұрын
You do not explain how the cameras are connected, you mention something about a switch that you connected, what is that switch for?
@MamaLyzTV
3 жыл бұрын
Will it support onvif or third party cameras? can you statically assign ip address on each camera? can you directly access camera using web browser?
@daveogbonna5914
3 жыл бұрын
GOOD QUESTIONS LEFT UNANSWERED.
@impy1980
Жыл бұрын
A camera reboot/power cycle would have worked much better opposed to restore, then you go into the NVR channel settings, add each camera and add the camera's password I had similar issues on my new QNAP NAS, and a power cycle worked for me to get them to show up, none are connected directly, then the QNAP NVR app forces you to enter the camera's credentials. You always want to change the default passwords, a restore would reset passwords.
@TWBrit65
2 жыл бұрын
I'm not getting any video showing on mine, I'll start the setup again for like the 8th time - I'm sure I'll work it out, probably have to hard reset every camera at this rate.
@kellylecompte9398
3 жыл бұрын
How do you reset for a new user? I bought this from a friend and need to reset it and create a new password
@Snabbaste87
3 жыл бұрын
Why would you x2-speed?
@L19-o7r
3 жыл бұрын
Can i plug 2 cameras into a POE switch, and then run one cable from the POE switch to the NVR, and also have 2 additional cameras plugged directly into the NVR?
@philippeleroux1653
3 жыл бұрын
According to Reolink your camera's just have to be on the same network as the NVR. So you don't have to run a cable from the POE switch to the NVR, since the NVR is already connected to your network
@ManfredRotgers
3 жыл бұрын
Is it possible to export recorded video to another pc/ nas on the network?
@SVU777
3 жыл бұрын
question just bought this when i go to hit shutdown it tells to make sure the to unplug the cable but it doesnt automatically shut down?
@MamaLyzTV
3 жыл бұрын
If you already have camera plugged in nvr port channel, you cannot configure another camera plugged in to external switch using same channel.
@josephbrasil7791
3 жыл бұрын
Just got one but I can’t get the mouse to work!?
@davida.davtian5917
4 жыл бұрын
hey can you advice any budget NVR for 16 channels?
@GeekSmart
4 жыл бұрын
amzn.to/3jCodco
@davida.davtian5917
4 жыл бұрын
@@GeekSmart that's isn't good option for me. - > ONLY WORK WITH REOLINK CAMERAS: Work perfectly with all Reolink PoE 5MP/4MP cameras, such as RLC-410/511/520/522/423/D400/B400 cameras. Manage up to 16 cameras simultaneously easily.
@davida.davtian5917
4 жыл бұрын
I'm using another cameras, so I'm not going to change all cameras to match NVR.
@ginger2770
3 жыл бұрын
@@davida.davtian5917 most companies are going to have their own proprietary NVR
@LatinosOver40
2 жыл бұрын
He looks like Putin ... LOL ... great info ... gracias amigo !!!!
@spencercarter5326
3 жыл бұрын
Video was extremely fast. This system will not scan code the NVR to set up phone app.
@ronniemcguire
3 жыл бұрын
Good vid but what's the hurry, commentary too fast and unclear in sections
@ManfredRotgers
3 жыл бұрын
Can you set quotum per channel for recording? And rotate recorded video when limits are reached? Deleting oldest recording first?
@mstrlucky652
Жыл бұрын
Terrible showing the wiring setup. Wasn’t clear at all which wires went were exactly …sorry
@soundsforyou9002
3 жыл бұрын
Mine keeps beeping, any help?
@gotoauto8550
2 жыл бұрын
I guess Mr. Putin is savvy with electronics.
@alanpivett1406
Жыл бұрын
First rule when teaching viewers, slow down, speaking at 100mph not good and everything you show is the same, you do not get a chance to take it in, YOU know the subject, we don’t and I used to teach at Universities, this video needs a rethink ….
@rumsiker
Жыл бұрын
HE HAVE NOT SHOWN YOU ANYTHING OF PROGRAMMING , SHOW YOU WHAT HE DID
@ronaldwoofer5024
3 жыл бұрын
save failed LMAO
@tonyweavers4292
2 жыл бұрын
Why do you Yanks have to do everything "Real Quick?"
@nino18654
3 жыл бұрын
I did not learn nothing from your video my new RLN8-410 still not working
Пікірлер: 58