Seeing you yeet that can of primer into the ground and then yell was way too relatable 🤣🤣
@Selendryle
4 жыл бұрын
i was frightened, that was like real rage there
@sniper6823
4 жыл бұрын
I have never seen him get so angry so fast but I can 100% relate
@esko-22
4 жыл бұрын
sometimes just anger purges
@ilikecereal156
4 жыл бұрын
I never noticed the old adventure bus cabinets in the shop until now.
@Mopardavid24v
4 жыл бұрын
Yoooo fr though
@notsofairisit
4 жыл бұрын
That’s crazy lol
@MilkMan1678
4 жыл бұрын
When you're a patreon and you hear caleb say you can watch the new video right now on patreon, and you get all excited, and then remember you're watching this video early. Nonetheless, great video, glad I get to support such great builds.
@Purpiii
4 жыл бұрын
it kills me every time
@lucassanches3568
4 жыл бұрын
9:49 *_A N G E R Y U M_*
@VelobsterN
4 жыл бұрын
So get rustolum primer then expensive paint and you’ll have an amazing paint job
@johnathandoe5357
4 жыл бұрын
Why did Molly look so scared when you took the front bumper off😂
@Purpiii
4 жыл бұрын
is the old car the dadsun? I've been waiting forever to see it come back
@SshiggyY
4 жыл бұрын
yes
@prototype_pandad6536
4 жыл бұрын
Yee! Patreon for the win! Keep it up!
@davewsh8434
4 жыл бұрын
The rally Miata build has been very fun and interesting. I loved it. It will be fun to see this car off-road. Video idea: Drag race rally Miata vs molly/turbo miata
@A0SAirsoft
4 жыл бұрын
this !
@tylerbauer1022
4 жыл бұрын
Gingium you are such a DIY guy it’s so fun to watch thanks for the content!!
@garrettkrieger6867
4 жыл бұрын
Okay you motivated me to finally paint the visor I got for my ranger. Also glad I got rustoleum primer.😂
@Drewisyou94
4 жыл бұрын
I painted my Chaser with a 40l 150lpm compressor and a HPLV gun. You just need to take your time and be patient. Much easier than messing around with paint tins.
@wottle-b335
4 жыл бұрын
*happy music playing* *paint can slams into the ground at terminal velocity* Ging: F**K *Happy music continues playing*
@osmiumviii4193
4 жыл бұрын
Hey Caleb, Paint looks good 👌
@articclark8188
4 жыл бұрын
I gotta say, it’s amazing to see how far this channel has gone. I started watching back when Gingium sticker bombed the dash of Fred the ford and stopped watching about 3 years ago. Got bored of KZitem in general and coming back to this channel is surprising to see how much it’s grown and how great molly looks
@SshiggyY
4 жыл бұрын
well done Caleb, im amazed at how far you have come. these recent videos have been amazing to watch and its been so enjoyable to see you work with other people too.
@Work_G
4 жыл бұрын
New paint is always the answer xD
@rs-flamingo
4 жыл бұрын
Every youtuber I watch has so much trouble with doing their own paint. I have so much respect for paint shops
@clown_hamster
4 жыл бұрын
Didn't expect Gingium to actually "enraged" with that spray can Nonetheless, you did well on waking me up from getting induced to that chill beats
@fpskoda467
4 жыл бұрын
8:48 was not expecting that
@ThisMarv
4 жыл бұрын
Honestly, I'm not a patreon for the benefits I get. I even watch the videos on the regular "free" schedule. I'm just a patreon to give that mad lad some deserved support so he can continue creating awesome content and work on amazing projects!
@_Gingium_
4 жыл бұрын
😍 thank you for the support man!
@ThisMarv
4 жыл бұрын
@@_Gingium_ I love seeing you live the life I could only dream of. Keep up the great work man!
@onetouchgarage4503
4 жыл бұрын
When you threw that spray can.. I felt that... I really did!
@cre8tivegarage157
4 жыл бұрын
Engine bay looks fresh
@liamlevasseur1064
4 жыл бұрын
I liked the video just because of ur rage it was awesome and so relatable😂😂
@fpsjordan6220
4 жыл бұрын
Dude I uses the same primer yesterday and your experience sounds exactly the same as mine. That stuff is either desert or runs and indeed expensive. I'm gonna try the Rustoleum primer you talked about. Cool project!
@pietroghedini98
4 жыл бұрын
The heck happened while you were painting?? 😅
@timothystrunk7323
4 жыл бұрын
Looks great to me
@bodes_26
4 жыл бұрын
As long as the engine bay is protected from rust that's really all that matters
@femsology
4 жыл бұрын
Watching you progress with every video in all the aspects from Your building process to how you’re recording and editing your videos is like watching a family member succeed! Keep up all the good work man, 👌🏻
@brando7655
4 жыл бұрын
So underrated you tuber. Straight grinding & actually get projects done!!
@noble5856
4 жыл бұрын
You have got the prettiest Miata I have ever Caleb and I mean that as a complement as a long time subscriber, I have a daily short bed single cab 2000 F150 and between molly and the drift truck I have a lot of inspiration to look up to, I’m thinking about swapping out the old engine and putting in a new 3.5L eco boost
@zacks240sx
4 жыл бұрын
High comp setup? Awesome.
@leoh.7160
4 жыл бұрын
Geez man... that engine bay came out beautiful. 👍🏻
@thegreat7428
4 жыл бұрын
14:00 hell yea brother
@ketchupspicyRS73
4 жыл бұрын
an air compressor will change your life, i think its a good investment to make not only for paint guns but air powered tools most of the time are way stronger and faster than electric. also a hvlp paint/clear/primer gun will spray at any angle you want :-) no more sputtering or dry finishes!
@JustinShepard00
4 жыл бұрын
Zacks there, instant like
@leo_AA40
4 жыл бұрын
It may be blue but it's the bomb
@joellabrecque5696
4 жыл бұрын
I really love that paint even though its more expensive, you can see the results 👍🏼
@Racer413
4 жыл бұрын
spraymax 2k clear is good spray can clear, its almost spray gun quality, and should hold up well.
@jannekumpumaki2697
4 жыл бұрын
can't wait for this thing to run
@zqz1585
4 жыл бұрын
I want the Audi drift car videos!
@zqz1585
4 жыл бұрын
Please!!!
@LiveToRidee
4 жыл бұрын
@gingium. I have a 30 gallon air compressor and a harbor freight HVLP. 30 gallons is more than enough. Just leave the compressor on. You arent spraying continously with an hvlp you spray for a few minutes then wait for it to flash between cross coats. 30 gal is plenty
@windycityliam5529
4 жыл бұрын
Yo gingium your merch site isn't working rn.
@sideways__joe0499
4 жыл бұрын
Use trans star primer it's the best drys really quick and it come in every primer color
@jakeh.5014
4 жыл бұрын
I just used rustoleum primer when doing my engine bay. I have an 82 BMW 320is and I’m doing the engine bay gold. I have a pretty good paint gun, I’m still learning to get confident with it. Wish me luck lol😂
@jasonprandy5905
4 жыл бұрын
Warm up the can with warm water and check the spray pattern on the nozzle
@reneXDgta
4 жыл бұрын
The Miata looks like a FnaF animatronic without the front bumper
@evankirschenmann4653
4 жыл бұрын
@8:48 *slams primer can into ground* "FUU-"
@Polar2598
4 жыл бұрын
Watching you yeet that can was very satisfying js
@K3NnY_G
4 жыл бұрын
Rust-Oleum needs to get their shit together and hit my boi with the big ol' box of self-etching primer.
@AbominableJoshie
4 жыл бұрын
Releasing the same time that 'ol Cleetur does a massive PPV event must absolutely destroy the early viewer stats on this video.
@calebcuddy1990
4 жыл бұрын
I’ve a 200l 10CFH compressor and I use hvlp guns and I could spray a whole car no problem
@benjigauhn9931
4 жыл бұрын
Watching this video while solving a coolant leak. How lovely
@ryanlott6309
4 жыл бұрын
2k clear is some good stuff. i did some sideskirts on my car recently and its held up amazing and cant believe the finish. spray cans suck for the fact you can not hold them at angles or spray at certain angles. and just so you know the cheap harbor freight spray gun is a good gun to use for primer there are so many shops that use them lol its pretty funny. and im not talking about shitty shops either.
@laterken530
4 жыл бұрын
LOVE FROM MALAYSIA 🇲🇾❤️❤️❤️
@toxinism
4 жыл бұрын
You don't need to prime the whole bay if you have already sanded the old paint, only in the areas where its cut through to metal or you have done repairs over.. Also that particular brand of primer is really good.. it also helps if you put it warm water for 10 mins.
@Bboy19902003
4 жыл бұрын
Next time you want a low cfm hvlp gun try Eastwood. I use there guns and they're pretty good
@sleepp6127
4 жыл бұрын
you should paint the valve covers like a metallic green to match the seat belts
@dream2too
4 жыл бұрын
Wauw, really looks slick!
@boostaddict_
4 жыл бұрын
You should try running the new engine without the turbo for a bit. Everyone needs to experience a high compression naturally aspirated engine at some point in their life. Oh, and the Spray Max paint is awesome. I've worked in a body shop, I like using professional HVLP setups, but I still use the Spray Max cans. I use primer I get at my local hardware store though. It was like $7 CAD for a can. Works great. Plasti-kote I think.
@p1llsburym4n21
4 жыл бұрын
The return of Snack Pringle
@fzj8022
4 жыл бұрын
So why did you sawzall the radiator support? That's a major structural support
@Theo-vz7en
4 жыл бұрын
Are we ever going to get an update on the RX7 with it’s new owner???
@thereallettuceweabois5918
4 жыл бұрын
Im not a patreon but I got here as fast as possible!
@tomakers57
4 жыл бұрын
You can buy multiple cheaper air compressors and hook them together to get more scfm and volume. That's what I did to run my air tools.
@Will-fr5du
4 жыл бұрын
I mean I've painted before with a $20 harbor freight spary gun and a 26 gallon air compressor running at 8cfm and the results were fantastic. Just my input
@elliotth3727
4 жыл бұрын
"When I mess up I am never too upset" Him 5 minutes earlier: FUC-
@JamieBainbridge
4 жыл бұрын
Know how you pressed the plastic lid into the base of the 2K can? Pro tip, put a bit of metal in your palm, like a coin or round scrap. Putting stuff through your palm because weak plastic broke is not a good time.
@kyleott1210
4 жыл бұрын
So excited for the swap🤙
@Juan188812
Жыл бұрын
Yo. a bit late here but nice nice lineup with f bomb drop to the beat.
@kwekumensah5642
4 жыл бұрын
Make the rocker cover sparkly blue with the metal shavings
@danieldoroff6723
4 жыл бұрын
Gingium, you actually don't need a crazy air compressor to run a hvlp gun... A 30 ish gallon unit with 1-2 cfm output is enough to get the job done. A 60+ gallon tank and more flow definitely helps, but it's not required at all. Its actually far more important to have a good dryer on your feed than a massive compressor. You should be able to get a decent quality gun, air compressor, dryer, regulator and Everything you need for under 500 bucks.
@mistere599
4 жыл бұрын
505k getting there bro
@quest8795
4 жыл бұрын
The paint looks great, and besides- you can't see imperfections Through the camera, and you certainly can't see the engine bay from the driver's seat ;) Good video
@adamhonda98
4 жыл бұрын
If you wet the floor air particulates stick to the floor so no dust gets in your paint or clear coat
@lewisfoster4584
4 жыл бұрын
I love Spraymax cans they are awesome 👌
@esko-22
4 жыл бұрын
it doesnt matter if the finish is good or bad atleast there is paint
@alexcarbone1222
4 жыл бұрын
The real sponsor of this video is Rust-Oleum
@CarBore
4 жыл бұрын
I'd love to do this sort of stuff with my 5 but I'm not bold enough or brave enough 😂😂 Looks brilliant. 👏
@ifGarage
4 жыл бұрын
8:50 literally me at work when I run out of glass cleaner.
@riskyboomer9618
4 жыл бұрын
I like that color, I wouldn’t mind having an AMC Gremlin in that color.
@nilsb.8559
4 жыл бұрын
Ever thought about using graffiti spray paint? The cans are really cheap and I think, that the paint is actually really good quality. If you take Molotow for example, they have stuff like "anti-run" "no dust" "all season" and in euros cost only 3,95€.
@morsecodereviews1553
4 жыл бұрын
2:39 that's what she said
@yesimbigwes
4 жыл бұрын
That clear coat is very impressive for a spray paint. I’ve used it and it is very hard to use. Unfortunately you have to be careful with the clear coat because it’s not as durable as regular clear coat
@richiemarms
4 жыл бұрын
Back with another vidiou!
@brianreynolds4185
4 жыл бұрын
Yo you should live stream u making a video of love to see the behind the scenes of a video
@lyndon_rich
4 жыл бұрын
Looks really good I won’t lie but kinda bummed on the rattle can idea of it. 2k i have used for several parts but if I was doing my whole bay or anything big like a body panel I would for sure get it professionally done. Even knowing I will beat it up a little working on the car
@lethal.8903
4 жыл бұрын
nice chair
@javonsanders1502
2 жыл бұрын
Hey brotha, I watch this video back alot because I'm planning on doing the same thing to my bay. Couple questions though, what was that black paint you sprayed before primer? And also how is the paint holding up currently? Could you maybe do an update vid to show it? I appreciate all the content and knowledge you bring bro keep it up💯🙏
@matthewbalok3793
4 жыл бұрын
I’ve used that 2K clear coat on my front splitter the paint chips off when doing 100+mph but it will be fine for engine bay
@johnjimmers9356
4 жыл бұрын
you should totally let me 3 step paint correct your miata :) compound, polish and cermaic coat/wax whichever you want
@ze_german2921
4 жыл бұрын
Nason 421-19 is the primer you want but you will need a Paint gun.
@pennycopperhatch9315
4 жыл бұрын
Wish I had a shop to do that to mine!....Fo Realz!....
@allstat1290
4 жыл бұрын
So it was really sponsored by your patrons
@kevinl.3012
4 жыл бұрын
Yes!!!
@dimitrismanavis9081
4 жыл бұрын
WAAAAAAAIT,what? Why did you you cut the metal peace behind the front bumper?
@jvh22a
4 жыл бұрын
I had the same problem with the 2k clear, cans tilting and it splattered out nasty.
@offroadwarfare9526
4 жыл бұрын
Just remember that self etching primers still need a sealer primer on top
Пікірлер: 220