Products Featured:
Stormsure Flexible Adhesive: www.stormsure.com/stormsure-f...
Stormcure Accelerator: www.stormsure.com/stormcure-g...
-----------------------------------------------------------------------------------------------------------------
Are your favorite boots suffering from a worn-out heel? Don't fret; Stormsure is here to help you bring them back to life! In this easy-to-follow tutorial, we'll show you step-by-step how to repair your boots and extend their lifespan, saving you money and reducing waste.
All you'll need is box tape or duct tape (or TUFF Tape 😉) and enough Stormsure Flexible Repair Adhesive to level the heels. You can use Stormcure accelerator to significantly reduce your cure time but this is not essential.
1. Score the heel of the shoe to give the glue really good adhesion to the sole (this will make your repair last longer).
2. Tape around the heel to make sure no glue will leak out.
3. Put enough glue on the heel to level it back out. Gravity will smooth it out and neaten it up but you can always do that too.
4. Leave it to cure for around an hour if you used the accelerator or around 48 hours if you didn't. The curing times vary depending on the environmental conditions of where you are performing the repair (temperature, humidity levels etc. so these times may vary slightly).
5. Once cured, use a pair of scissors to trim any excess glue and neaten the repair.
6. Enjoy your repaired boots!
Feel free to send us any pictures of your repair via email or social media too!
-----------------------------------------------------------------------------------------------------------------
Music: (massobeats - warmth: • • massobeats - warmth (r...
Instagram: / stormsure
Twitter: / stormsure
For enquiries: sales@stormsure.com
Негізгі бет Тәжірибелік нұсқаулар және стиль Repair a Worn Boot Heel | Durable Repair
Пікірлер