When braking, there was a creak, I examined the front brakes - the inner pad was completely erased, the wear sensor fell out, so there was no message on the dashboard.
The brake piston was pressed in problematic, there was a lot of rust under the duster. I decided to do a full service of the front calipers. The brake disc decided not to change, since its thickness is more than 23mm, there is no beating, there are no deep furrows.
To replace the front brake pads and repair the #Audi #a6c6 caliper, you will need the following tool:
- Hexagon H7
- Wrench for 11
- A tube for flushing the brakes
- Clamp
- Flat blade screwdriver
- Syringe
If the connection for pumping is not possible to unscrew the wrench on 11, then you can hammer the end head on 10 and then it can be unscrewed without problems and then replace with a new one.
===========================
Spare parts articles (for 314mm brake disc)
Front brake pads METACO 3000034 (original VAG 8E0698151K)
Repair kit front caliper with piston METACO 3840063
Brake fluid LUKOIL DOT-4 0,910 kg LUKOIL 1338295
===========================
My blog on DRIVE2 www.drive2.com/users/mark47/
Негізгі бет Автокөліктер мен көлік құралдары Repair front calipers Audi A6 C6 pistons replace
Пікірлер: 53