Thanks. Just as easy as video show's. Had to use a screw driver to loosen lock assembly from door. Dealer wanted $210.00 just for labor to replace.
@ventu426
2 жыл бұрын
I can’t thank you enough for the video have a Hyundai Genesis and my handle was broken and a body shop was charging me $625 and it literally took me 10 minutes to install. Thank you sooooo much!
@Blazingflashover
7 жыл бұрын
That was actually really fun to watch thanks 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
@BruceLyeg
7 жыл бұрын
I thought for sure the screw driver was gonna slip and carve a line in the door lol. I wish all door handles were that easy to change. Thanks for the video.
@robertmedina6875
Жыл бұрын
You’re awesome! New subscriber here! Thanks for all the hard work to show these videos!!!!!
@peterdardarian2211
3 жыл бұрын
I wish I would have watched this video before I decided to take my whole door panel off I didn't think it was that easy thanks a lot for this video
@errolwayne
2 жыл бұрын
Appreciate this 🔥Have the same car and had to replace the door handle. I was stuck w how to get the keyhole out. Good pull and it came right out 👍🏿👍🏿
@peternewman3847
2 жыл бұрын
Great video - I changed my 2012 Veracruz door handle in five minutes... many thanks!
@extensionsinmyhair
Жыл бұрын
Very helpful. Wish I knew why both of mine stopped working at the same time
@BigDog50001
7 жыл бұрын
At least it’s not a pain to replace. Nice video.
@Mopar3.6LV6
3 жыл бұрын
Great video and explanation. Quick question: can the little black push button be replace on it's own, or does the entire door handle need to be replaced? Push button works but came off and wont stay back on when trying to put it back into the little opening. Thanks.
@sayssimon7405
Жыл бұрын
Same here too hope they show how replace only the button
@EdOfTheMountain
5 жыл бұрын
Wow! I thought I'd be wasting an hour or more taking apart inside door panel. I will find out if this works on my 2008 Hyundai Accent this weekend. Thank you!
@Z-Bone-e7j
Жыл бұрын
My door handle cap broke off and I bought a new one but the screw is not latching onto the piece so I can't screw it back in. Not sure why this is happening because you made it look so easy.
@dxunangel
2 жыл бұрын
I'm definitely trying this on my Tucson!
@matthewsantos8525
3 жыл бұрын
thanks for the help, I don't own a Sonata but own an Elantra, but the same principle applied
@jeffsteiman8425
2 жыл бұрын
I have a 2016 Hyundai elantra. The retaining screw is a phillips head so a little different. When that screw is loosened, similar to video. Lock cylinder seems held in by an additional something. Is there something else on the 2016 that holds the lock cylinder in? How do I get the lock cylinder out?
@Rockontrigirl
2 жыл бұрын
I have a 2017 Tucson and mine does too. can't get the lock cylinder out!
@Joe_S_15
2 жыл бұрын
I have a 2017 hyundai elantra se same issue
@Exegensis
Жыл бұрын
Has anyone figured it out?
@TheDisgruntledMechanic
7 жыл бұрын
Nice! didn't look too bad especially after you have done one!
@gordonfreeman5434
7 жыл бұрын
Man that is super easy. Then again ALL late model hyundais are SUPER easy to work on.
@craigshillingford6671
2 жыл бұрын
That was super easy. Thanks !
@alexisfullofnonsense
3 жыл бұрын
If you replace the cylinder, do you have to reprogram your fob? Someone tried to break into my 2017 elantra (keyless start/entry) and damaged the cylinder
@yashin366
2 жыл бұрын
Is it possible to replace a button door handle with a touch sensor door handle on a Hyundai Tucson ?
@elcousin2409
2 жыл бұрын
Which drill is that which you are using here?
@williamobrien6340
7 жыл бұрын
Great to know about the little bolt on the side I never knew that thanks
@jbstillman
4 жыл бұрын
Thanks! Our button doesn't work either. I was able to remove it in under a minute based on your video. Sadly, it looks like it's pretty well sealed and would probably crack if I tried prying the handle apart to poke around at the button itself, unless there's a trick to it. Putting it back on took under a minute as well. Do you have a part number for the front drivers handle?
@hrushireddy5027
2 жыл бұрын
826611V200 Handle assay, door outside RH
@emmiegartland444
2 жыл бұрын
Excellent, thanks you .
@junes7255
3 жыл бұрын
Trying to do this on a ‘21 Veloster but the lock has a triangular metal piece on the left side which seems to be in the same space as the handle support. Any idea how we get the lock back in?
@johngilley3518
7 жыл бұрын
I wish my son's 03 Tiburon was that easy. Power lock on passenger side froze up and remote wouldn't work till I replaced it.
@chianemable
3 жыл бұрын
Thank you !
@ooscgt
4 жыл бұрын
Do you guys know if the handle has some sort of antenna or sensor? My button on the driver side works but only if I put the remote right next to the button, which defeats the purpose. Passenger button and trunk work fine. 2017 Elantra.
@VRacing
7 жыл бұрын
60%Of the time works every time
@TheSnapOnToolReview
7 жыл бұрын
+Simulation Gaming hahahahaha
@msking944
3 жыл бұрын
Helpful video Thanks
@ooscgt
4 жыл бұрын
Very helpful man.. thanks
@xx87gt306xx
4 жыл бұрын
Same torque spec I use!
@toytech468
7 жыл бұрын
Nice video bro! Is there a reason why this video doesn’t show up in your recent uploads but it does in your repair Monday playlist?
@TheSnapOnToolReview
7 жыл бұрын
+Warren Higaki thanks bro. Yes, it’s because it’s been uploaded and set to private until Monday. I guess putting into the playlist makes it visible. I’ll have to fix that.
@toytech468
7 жыл бұрын
The Snap-On Tool Review Sounds good bro! 👍🏼 You catch a look at my new KRL??
@TheSnapOnToolReview
7 жыл бұрын
Warren Higaki no! Did you post it on Collectors or Instagram?
@toytech468
7 жыл бұрын
The Snap-On Tool Review Instagram, I tagged you in the pic!
@maxnichols9975
7 жыл бұрын
Crazy similar to the Ford door handles anyone who works for Ford knows about the door latch recall I've done more than I care to talk about 😂 good vid man!
@buzbuz82
3 жыл бұрын
The lock cylinder won’t come off... seems easy on the video but feels like stuck in there in my car...
@bobskorn
3 жыл бұрын
Pull the bolt out
@angel29558
7 жыл бұрын
Where did u get the tire cart/dolly?
@Andres9632
5 жыл бұрын
Awesome. Someone fucked with my car and broke the plastic that the bolt goes into. Thanks for the quick show.
@hondamxbmx692
7 жыл бұрын
KISS! hell yea man
@robbiesantos7677
7 жыл бұрын
How did you diagnose it ?
@TheSnapOnToolReview
7 жыл бұрын
+Robbie Santos I didn’t. Another tech did.
@edwinsandoval6505
7 жыл бұрын
nice bro you. rock. man
@EdwardCordeiro
7 жыл бұрын
Just did one friday haha
@tommy2748
7 жыл бұрын
Is that Nissan fuel additive on your box? Haha we all know what is going on !
@scottdavenport2967
7 жыл бұрын
At my shop the customer would have to wait 2 hours before someone was available to do the work lol. Shame.
@ibrahimali-sq6pp
5 жыл бұрын
No chance to repaire that button
@hacatan24
2 жыл бұрын
Wow that's too fukin easy
@mattmcmillan8920
7 жыл бұрын
Now that job looked so hard l,ll bet after you were done you were for a cold beer fucking beer 30.
@TheSnapOnToolReview
7 жыл бұрын
BAHAHAHA I'm Always ready for Beer30!
@ashtonnuckols2663
7 жыл бұрын
.3 warranty lol
@jimcrabtree2827
2 ай бұрын
No need for your foul Language, it makes you look uneducated !
Пікірлер: 63