This is the best video of them all. I've had a broken handle for 2 years because all the other videos looked way to complicated. Today I found your video and less than 20 minutes I had it done. You are the best.
@TheFixitShed
2 жыл бұрын
Thank you for the kind comment. Glad it helped!
@MarzNet256
Жыл бұрын
I agree. It is an excellent how to.
@jeromegaynor9015
10 ай бұрын
Dude what a lifesaver! I tried and failed this repair 2 years ago, and finally got up the courage to have another go - and found this video, and succeeded this time! Thanks, finally I’m not the loser with the missing door handle on my block 🙂
@TheFixitShed
10 ай бұрын
Congratulations on your success! I am glad the video helped.
@SonsOfTheDesert
Жыл бұрын
This was the best one for the rear door handle due to the part with the fingers inside going on to the little metal part. Thank you!!! A huge time and money saver and I didn't break anything thanks to this video. Very nicely done!!
@TheFixitShed
Жыл бұрын
Glad it helped!
@brianforan6833
Жыл бұрын
What an excellent video! I am about to install two rear door handles to my friend's 2006 Toyota Matrix and without your video, I'm sure I would have been befuddled. Thanks for helping so many people out with your knowledge and video production skills.
@TheFixitShed
Жыл бұрын
Thanks! Glad it helped!
@kylemills7161
Жыл бұрын
Thanks for the video, I'm going to be doing this in just a little bit. Unfortunate that it is a bit more complicated than the front door, but I'll get it.
@TheFixitShed
Жыл бұрын
It is more complicated but definitely manageable. good luck!
@jimward8366
2 жыл бұрын
thank you so much for this awesome video, replaced the handle in 20 minutes, followed you step by step
@TheFixitShed
2 жыл бұрын
Glad it helped!
@2wenty0netj003
3 ай бұрын
This made everything so much easier. Swapped my broken handle in 20 mins!
@TheFixitShed
3 ай бұрын
Glad it helped!
@jimkelley5812
Жыл бұрын
Suggest you remove the silver 10mm bolt that secures the window track, located below the door latch and move the guide inboard. This will make it easier to remove the door latching mechanism. Also. when you are trying to place the red fork over the silver lever, wear a glove. Makes it easier to push down that lever and slide the red fork into place.
@jimkelley5812
Жыл бұрын
And you get a "Thumbs Up" for such a good vidio!
@MotorcycleRider-e7b
9 ай бұрын
Used your method just today! Was able to repair the door handle in about 20 minutes! Thanks for the video.
@TheFixitShed
9 ай бұрын
Nice work! Glad the video helped!
@mrgtofer8609
9 ай бұрын
Thanks for the video. It was perfect. My bolts were T30's not T27's. That was the only difference. 2006 Toyota Matrix
@TheFixitShed
9 ай бұрын
Thanks!
@lauradulin1525
2 жыл бұрын
thanks for the video. I hope we can pull it off because the dealership wanted to charge me $325 in labor to do it. OUCH
@TheFixitShed
2 жыл бұрын
OMG! That is insane. You got this.
@lauradulin1525
2 жыл бұрын
thanks. It worked!!
@TheFixitShed
2 жыл бұрын
That's awesome!
@simonklitzner1314
2 жыл бұрын
i ordered the hex for the doors first i fixed the front that was super easy , then waited for it to cool down in temp from the outside heat and gave it a try on the back door expected it to be much harder it was since i had to remove the door panel and the fork lock seemed to be the hardest but thanks for your video all good
@TheFixitShed
2 жыл бұрын
Nice work! Glad the video helped
@deeclination
7 ай бұрын
Sir you are the best ,clear great inside door videos and no nonsense. Much thanks.
@TheFixitShed
7 ай бұрын
Thank you! I am glad you liked it.
@brendafigueroa7091
Жыл бұрын
Huge thanks for the guide, It helped me figure out how to put on the handle without too much of a fuss.
@TheFixitShed
Жыл бұрын
Thanks, I am glad the vieo was helpful.
@catherineoneill1420
Жыл бұрын
Thanks for this video, it is the best one of the several that I watched. It looks like I will be able to get the inside door panel off with the door closed as the inside latch wont work and the outside is broken. I think that when the handle got hit and shattered the inside latch was moved. Thanks again, Brian
@TheFixitShed
Жыл бұрын
Thanks! I am glad you liked the video. I hope you get it working
@tonympv
Жыл бұрын
Excellent tutorial! Even I was able to replace the door handle relatively easy. Thanks.
@TheFixitShed
Жыл бұрын
Glad it helped!
@ianritchie1022
7 ай бұрын
Thanks for the video. I fixed my 2007 Toyota Matrix handle in 20 minutes!
@TheFixitShed
7 ай бұрын
Glad it helped
@MarzNet256
Жыл бұрын
Thanks. Gotta replace LR handle on my 2006 Matrix. This is actually the first piece of plastic to ever break on this car with almost 208k miles. Also, I occasionally spray some silicone lube into handle mechanisms to keep them operating smoothly.
@TheFixitShed
Жыл бұрын
That is awesome! Sounds like your Matrix held up well. Thanks for the tip!
@catrachoforeigner7140
Жыл бұрын
Thank you so much you helped me do it myself
@TheFixitShed
Жыл бұрын
Glad I could help! Congrats on your success!
@ourtexasfamilyvideos62
Жыл бұрын
I did this about 4 years ago. Broke again. Had to come back for a refresher course.
@TheFixitShed
Жыл бұрын
I do that all the time
@erichan5922
Жыл бұрын
Excellent video, saved me a bunch of money, thank you! (Fortunately, I had a Torx 27 too!)
@TheFixitShed
Жыл бұрын
Thanks! Glad you liked it!
@simonklitzner1314
2 жыл бұрын
the tork bolt remover is not q 27 its the 30 just did the front door on sunday and will doing back door next week , but thanks for video it will surely help out .
@mariamoran4516
Жыл бұрын
I hope Ibe available to replace it myself 😢. Looks good to me and easy but , I’m terrible with screwdriver. Thank you
@TheFixitShed
Жыл бұрын
Good luck! Let me know how it goes.
@garycrouse1918
2 жыл бұрын
Man that was easy thanks to your video. Thanks Bro
@TheFixitShed
2 жыл бұрын
I am glad the video helped!
@jakehomer9478
11 ай бұрын
Thanks! This is exactly what I needed
@TheFixitShed
11 ай бұрын
Glad I could help!
@GaHLaT
Жыл бұрын
Worked great, thanks for the help!
@TheFixitShed
Жыл бұрын
Glad it helped!
@fifty6chev
2 жыл бұрын
Video is incomplete. When putting in the new handle, it must catch the latch to be operable. This doesn’t always happen. I had to reach in and pull the latch down to hook up to the handle.
@TheFixitShed
2 жыл бұрын
4:55
@jacedudley
2 жыл бұрын
Good thorough video, thanks!
@TheFixitShed
2 жыл бұрын
Glad it helped!
@ttpp7993
6 ай бұрын
Great video!
@TheFixitShed
6 ай бұрын
Thanks! I am glad you liked it!
@docbrazen
Ай бұрын
Fyi the torque called for the door handle cover screw is 35 in lbs. The 3 lock assembly screws call for 44 in lb of toruqe and adhesive Three Bond 1234 or equivalent, you can use loctite blue 243 which is the oil resistant version. This is all from the offical Toyota Matrix service manual.
@TheFixitShed
Ай бұрын
Thanks for contributing! I'll add this info, credited to you, to the description, if that is ok with you
@docbrazen
Ай бұрын
@@TheFixitShed Sure. Hope it's helpful for everyone! Btw I had a typo it should have said in lbs not ft lbs. I corrected my typo. Big difference!
@nicolasrobitaille412
Жыл бұрын
Thanks, very helpful!
@TheFixitShed
Жыл бұрын
Glad you liked it !
@crb-llz7707
Жыл бұрын
Hey man! Your video helped me out a ton but during the process I accidentally broke the red fork that helps the door open from the outside. How is that piece called? Can I replace it easily? Thanks a lot
@TheFixitShed
Жыл бұрын
Glad the video helped. Sorry you ran into a problem. I am not sure of the technical name for the part, and without ripping the door apart, I am not sure what would be invilved in replacing it.
@crb-llz7707
Жыл бұрын
@@TheFixitShed thanks anyways. I will head to junkyard and see if they have that red fork
@yuritrembath6904
Жыл бұрын
Thanks!
@TheFixitShed
Жыл бұрын
Thank you so much for the SUPER! Glad you liked the video.
@erwinet007
5 ай бұрын
This is an absolute nightmare!
@TheFixitShed
5 ай бұрын
did you get it straightened out?
@prattesrus
Жыл бұрын
I closed the door while it wasn’t latched properly. Now the door is stuck closed. Is there any way to bypass that and get the door open?
@TheFixitShed
Жыл бұрын
You should still be able to open it with the inside handle. The inside handle goes directly to the latch. It doesn't use the red fork that the outside handle does.
@JerryVanSickle-pm1fj
4 ай бұрын
What if the exterior door latch doesn't open the door
@TheFixitShed
4 ай бұрын
You may not have the silver tab in the red fork inside the door. There is a spot in the video where I show the inside, and you can see the two parts that need to go together
@EvendimataE
2 ай бұрын
would be nice if they made it as easy as the front door....front door is the easiet job ive have done on my 2003 camry
@TheFixitShed
2 ай бұрын
Yes, it would
@argelhernandez1913
2 жыл бұрын
Good afternoon, I have a problem with a door for a Toyota Matrix 2008. I wanted to change the handle of the rear door for reasons of time. I didn't have time to change it. Disassemble everything and put everything back, but I forgot to put the red safety rail and put it aside by mistake. activate the child lock of the door now the door does not open from the inside or from the outside how can I open it?
@TheFixitShed
2 жыл бұрын
Ouch. I don't have mine here to look at for reference (my son has it at school), but you have to get the door panel off. It is not going to be easy with the door closed. Or if there is a way you can slide something in the door jamb to switch off the child lock. Thats not going to be easy, either.
@leef_me8112
Жыл бұрын
You didn't tell us about >repairing< the plastic curtain that you cut.
@TheFixitShed
Жыл бұрын
Packing tape works well.
@paulsampson1103
2 ай бұрын
You don’t have to cut the plastic; just pull it away from the top.
@jrthibaultutube
Жыл бұрын
I replace the rear handle and trying to open the door from outside does not work, what I am doing wrong.
@TheFixitShed
Жыл бұрын
You may not have lined up the latch with the fork when you reinstalled the latch. I would start there. Reach in and just pull the lever down and when it comes back up it should catch the fork.
@jrthibaultutube
Жыл бұрын
@@TheFixitShed I have no problem with that. When I inser the handle it moves freely and does not activate the opening of the lock. Am I missing a step?
@TheFixitShed
Жыл бұрын
Watch the video at the 5:00 mark. Is that white/silver lever inside the red fork on yours? If it isn't, the handle will still move freely and not open the latch. If it is not inside the fork, just manually move the white/silver lever down and when it comes back up it should be in the fork. If it is in the fork, close the door and move the lever down manually and see in the door latch releases. if it does not, there is a problem with the latch. If the latch releases, there is a problem with the engagement between the handle/fork/lever.
@itkapatanka
2 жыл бұрын
1:57 What? The red wire suddenly disappears?
@TheFixitShed
2 жыл бұрын
Magic. IIRC, the camer cut off while I was in the middle of that take. When I reset everything to reshoot it, I forgot to reconnect the wires, so when I went to edit the video, I didn't have anything thing that showed me disconnecting the wires, but it seemed pretty simple and obvious, so I did not do it all over again.
@TheJayWavy
Жыл бұрын
When removing the latch your wires "magically" disappear. Why skip the part showing how to safely remove them? Smh
@TheFixitShed
Жыл бұрын
Because the camera didn't record it. I figured it was a simple and straight forward enough task that people would be able to figure it out, so I didn't take the door apart to reshoot it. Maybe I was wrong.
@CTAjunior
2 жыл бұрын
I must have the wrong door handles because mine won’t go in… did it say on the little bags the part number? I really don’t get it. In your video you first put the front part of the door handle in then the rear part. If I do that, the rear part won’t reach.
@TheFixitShed
2 жыл бұрын
I no longer have the bag that the handle came in, but when I look up the listing, the rear door handle I ordered for my 2006 Toyota Matrix says 69211-02130
Пікірлер: 97