Just wanted to give you a BIG THANK YOU! We were meeting resistance when feeding the hose through the top of our Grohe Alira Low profile and was not sure how to proceed without breaking the hose. The part of your video when you say to move the hose around to find the opening was priceless! Saved us an expensive plumber bill. Thank again! You are the best!! (submitted by Ed's wife)
@MarkFauntleroy
Жыл бұрын
Glad it helped!
@Chocowatte
Жыл бұрын
You rock Mark! Learned quite a bit from your video including identifying the quick release mechanism. Only difference: Instead of the weight we had a slinky-looking metal Spiral tube with two rubber ends that fit over the hose from the sink bottom and provided some tension. Success! Thank you very much Mark!
@r.forman1062
Жыл бұрын
Never commented on KZitem before. Just paid about $500 to have a new pulldown sprayer put in by a plumber. Parts and labor. Great presentation. Sometimes, in the past, speed of presentation and accents have made understanding difficult. I'm not a great handyman so I won't comment further.
@lealfabio
Жыл бұрын
The hansgrohe replacement hose fitted this model perfectly! Thank you so much!
@user-jn7cr2on3j
Жыл бұрын
Thank you very much for this great video! I don't have any skills in plumbing, but I changed faucet sprayer hose by myself. Excellent step by step instruction.
@MarkFauntleroy
Жыл бұрын
Glad my video could be helpful.
@makeadifference8546
Жыл бұрын
So helpful with great explanation and demonstration. Thank you so much for sharing this!
@KevinJacobKurian
Жыл бұрын
Super useful and helpful video. Accomplished my first plumbing work and saved some $$$ 😅
@MarkFauntleroy
Жыл бұрын
Glad it was helpful
@grahamreid7524
2 жыл бұрын
Thanks. the point about leaving the plastic tip and twisting to feed it new hose through saved the day. Thanks.
@MarkFauntleroy
2 жыл бұрын
Glad my video was helpful.
@danielt5106
Жыл бұрын
Excellent video! Thank you!!! I LOVE KZitem! U can literally find everything inhere!
@elessar7408
5 ай бұрын
finally find same model on youtube, thanks a lot. Btw, the part is difficult to find in local store, and quite expensive online.
@paullech3680
2 жыл бұрын
Excellent explanation - just what I was looking for. Thank you, Mark.
@MarkFauntleroy
2 жыл бұрын
Glad you found that helpful.
@TheSolidsnake2001
2 жыл бұрын
Thank you for your video, my faucet leaking problem (under the sink) turned out it's just the spray head got loose.😆
@randallsmith7885
2 жыл бұрын
Thanks for the update. I am thinking of installing an updated model of my old Grohe faucet. Do you like using your Grohe pull down faucet? Any advice on pull down versus pull out? Thanks in advance!
@ronaldsnooker6597
3 жыл бұрын
Beautifully explained thank you !
@MarkFauntleroy
2 жыл бұрын
Glad you found that helpful.
@jeristiles6331
Жыл бұрын
Great explanation, would like to know hansgrohe spare parts number?
@KongShun
2 жыл бұрын
Very helpful.
@Sloweddy2447
Жыл бұрын
Thank you for the video. I have the exact faucet that has a leaky hose. Will you please give me the Grohe part # for the hose ? Thanks
@JESSICALENG
4 ай бұрын
I have the same faucet but the leak is around the handle. Any idea how to pull the handle apart? There isn’t a screw.
@terimartin291
Жыл бұрын
I have this faucet and my problem is where the gooseneck connects to base it wobbles when you move side to side. Any remedy??? Thanks
@khoile319
3 жыл бұрын
thank you so much!
@navamous
2 жыл бұрын
I have the same faucet. The spout came out from the sink mixer base. Now the spout won't tighten to the sink mixer ....
@carino521
2 жыл бұрын
Thanks for the video! I'm looking for a cartridge for the same model. Could you tell me the kitchen faucet model name?
@MarkFauntleroy
2 жыл бұрын
I think that is a type of Grohe Concetto. It's a bit older and I was renting that place before. So, I am not certain, but it seems closest to the Concetto models. Hope that helps. Good luck.
@FirstLastOne
2 жыл бұрын
Grohe 32665001 Concetto
@willhkwong
Ай бұрын
What model is that Grohe kitchen faucet?
@MarkFauntleroy
Ай бұрын
@willhkwong - Sorry. I'm not sure. That was in a townhouse we were renting a few years ago.
@petercyz
11 ай бұрын
Where to buy the Hansgrohe? Thank you.
@MarkFauntleroy
11 ай бұрын
Amazon in the US here: www.amazon.com/Hansgrohe-88624000-Pull-Down-Kitchen-Faucet/dp/B004PUII7I/ref=mp_s_a_1_4?adgrpid=57610950658&hvadid=589949366764&hvdev=m&hvlocphy=9031040&hvnetw=g&hvqmt=e&hvrand=10966450958003524101&hvtargid=kwd-297808097218&hydadcr=13993_13403009&keywords=hansgrohe+88624000&qid=1697661344&sr=8-4
@Sloweddy2447
Жыл бұрын
Sorry, I need the part number for the model you replace at the beginning of the video.
@TRaddcliff
2 жыл бұрын
trying to replace my hose....but when I go to pull the hose out....it seems like there is not enough room for it to come thru the housing. ideas? I didn't install this....and it looks like whoever did....didnt give enough room for the hose to be removed.
@milfora
10 ай бұрын
I'm having the exact same issue, I've disconnected the water with the quick release and I just cannot pull the hose out through the faucet. Any suggestions would be greatly appreciated
@TRaddcliff
10 ай бұрын
Hey @milfora I contacted the company and told them my issue, and they were awesome. They sent me a braided hose that’s slides thru the faucets pipe smoothly. It took a little time to come, but makes a world of difference.
@Sloweddy2447
Жыл бұрын
Hi Can you give me the Grohe part number for the hose , so I can get the right part. Thank yu .
@MarkFauntleroy
Жыл бұрын
Sorry. I no longer have this property and don't have a record of the part number. So sorry I can't help further.
@Coffeeismyhappyplace
2 жыл бұрын
Why does every video have that hose going right down in. I can’t get my glacier bay replacement to go in so I can finish the job
@cegceg3559
2 жыл бұрын
I believe the weight is supposed to slide on the hose in order to provide you as much as possible to pull out. As you push the hose back in to the fixture the weight will slide back down, assisting the return. Making it unmovable limits the available length.
@FirstLastOne
2 жыл бұрын
No, it is supposed to be in a fixed location but the worst location for it to be fixed to is at the bottom or past the bottom and to the side of the loop that goes to the fixed point with the quick release. After about 3 to 4 years, the hose will start to leak inside the weighted area from stress fatigue.
@user-vk4po6rm7m
3 ай бұрын
That was truly a nasty thing to do! Pets should be washed outdoors or in the garage!
Пікірлер: 44