Thank you for sharing the video. I changed mine today due to the failed smog test (I got the same crack and failed by visual check). It took me around half an hour.
@lmsdiy
2 жыл бұрын
Awesome. Nice work!
@950472433
Жыл бұрын
I just ran into this identical issue and this video was a huge help! Thank You!!
@lmsdiy
Жыл бұрын
Awesome! Glad it helped you! 🙂👍
@dmorrison1952
2 жыл бұрын
Just changed mine in 20 minutes. Followed instructions to a tee. Perfect!!
@lmsdiy
2 жыл бұрын
Awesome. 20 minutes - great job! 👍
@scotttrotter283
2 жыл бұрын
Awesome instructions! Thanks bud!!
@lmsdiy
2 жыл бұрын
My pleasure! Glad it was helpful. 👍
@a-izqts2
11 күн бұрын
Great video, thanks! I just replaced mine after hearing a louder idling noise, higher pitched then noticing that the original 16 year old hose had cracked from the neck that attaches to the throttle just like yours. Then I saw a huge crack on the right side of hose near the resonator. How tight should the bolt on the bracket to the throttle be tightened? Is it possible to over tighten and damage the hose? I also want to make sure it won't come off. I used a regular ratchet wrench. Also, my new hose (same brand you mentioned) seems stiff and not flexible like yours, it's not a genuine Honda hose. I bought it at a local auto parts store. How long did the one you have last? Thanks!
@lmsdiy
10 күн бұрын
Hi, tighten it by hand moderately tight. Then just grab it and try to move it a bit to see if it comes off. If it doesn’t then you should be good. The original one lasted 15 or so years. 🙂
@simonjester100584
2 жыл бұрын
Very well done video! Thanks!
@lmsdiy
Жыл бұрын
Glad you liked it! Thank you for watching!
@martindoiron66
2 ай бұрын
Is it a "must" to unplug the negative pole???
@lmsdiy
2 ай бұрын
It’s generally a good practice but I wouldn’t say it’s a “must.”
@Heysupdan
Жыл бұрын
Good job! Thanks !!
@lmsdiy
Жыл бұрын
No problem 👍 🙂
@wanelly
2 жыл бұрын
Does a broken one affects the engine driverbikity in anyway other than the possibility of sucking in some dirty air?
@lmsdiy
2 жыл бұрын
It depends. For instance, my Honda Pilot has a MAP (Manifold Absolute Pressure) sensor, so it measures airflow at the throttle body. If air is seeping in through the crack, the MAP will still be able to accurately measure airflow. If I have a Honda Pilot with a MAF (Mass Air Flow) sensor, that will measure air pressure in the air intake tube after the airbox and before the throttle body. If air seeps in after the MAF, then the ECU will not be able to measure that air flow and as a result the driver may notice things such as a "lean" or "rich" air/fuel mixture condition resulting in a check engine light, rough engine or idling, poor performance and/or fuel economy. Hope that helps.
@BeStHaXYT
Жыл бұрын
Thanks bro
@lmsdiy
Жыл бұрын
No problem, brother. All the best. 👍
@BeStHaXYT
Жыл бұрын
@@lmsdiy yessir made it very easy also I subbed 💙
@lmsdiy
Жыл бұрын
@@BeStHaXYT Awesome thank you so much!
@gunnyoorah1846
2 жыл бұрын
those are AIR TUBE DAMPERS got the info from Daryl D. youtube video. Great job .... WWG1WGA OORAH!!
Пікірлер: 24