Thank you so much brother I just accepted an offer on my house and literally came home to find my toilet leaking from the top of the water supply line and the realtor wasted no time scheduling the inspection without asking me in 2 days your video is a lifesaver god bless
@skchatten
Жыл бұрын
Nice and simple - explained without over explaining, I appreciate you!
@KuraMad2000
4 жыл бұрын
I just want to say thank you for introducing me to these hand installable lines. I thought they were gimicky at first, but after looking at them at home depot, the design seemed sound so I bought a couple to try. After spending 10 minutes on my back struggling under a sink with 2 oversized wrenches trying to remove the old nut installed plastic lines, and then taking about 2 minutes out from under the sink to install these new ones by hand, I'd agree these are by far superior for install and removal. That is, assuming they are durable and long lasting, that remains to be seen, but so far I really like these.
@oliviaceja1347
7 ай бұрын
Thank you Sr. As a single mom this video was very helpful.
@johnhaueisen
2 жыл бұрын
Excellent. This is the most helpful video I've seen to help me understand exactly how to attach water supply lines to toilets.
@wyattspop
2 жыл бұрын
Just an FYI, the "Basin Buddy" or the Home Depot version "Faucet Nut Wrench" blows the doors off the standard basin wrench for this task. The nuts mounting the faucet are nearly always very hard to reach and likely both frozen (even plastic) and worn out some. The "BB" is a closed design and locks on, the standard basin wrench is open-ended. Pro tip, tap on the BB wrench with a small hammer to let it seat well before you crank them off, thanks for your work
@chairboi2936
3 жыл бұрын
Don't forget to empty the tank before doing this.
@johnny_bruhchill
Жыл бұрын
Why?
@seeharvester
Жыл бұрын
@@johnny_bruhchill You'll find out. He He.
@johnny_bruhchill
Жыл бұрын
@@seeharvester I’m a plumber and I do it if not daily, weekly. You don’t need to drain the tank
@seeharvester
Жыл бұрын
@@johnny_bruhchill How do you keep the water from draining out on the floor from the tank if it isn't empty? Mine has nothing to hold it back. I suppose you could stick a plug in it from inside, but why bother?
@johnny_bruhchill
Жыл бұрын
@@seeharvester what do you do for a living? Yeah same with this convo why bother.
@vandammefan34
Жыл бұрын
Great video! Never knew you didnt need to drain the tank.
@tina2correa
Жыл бұрын
This video helped me today to fix leaky supply line
@NicholasBlake84
3 жыл бұрын
Thanks for the video. I intend to refer back to this once I get the hose. I did a real doozie. Toilet was leaking from fill valve connector but my mom who I was doing the repair for thought it was her toilet seal into the floor leaking as the screws were rusted out. Sure I lifted up the toilet and replaced the seal and screws but cracked the hose resting the pressure of the 75 LB toilet against it. Now I'll be making this repair too! Hey at least by the end of it she will have all but a new toilet!
@QAsession
7 ай бұрын
You're a life saver!! Thanks 😊
@gustavovega9921
2 жыл бұрын
Great information. I am going to replace both of my toilets. A friend just had a busted water supply while sleeping for the night and made huge water damages to the house.
@WilliamTaylorII
3 жыл бұрын
Helped me install my new bidet attachment. Just needed to know which direction to turn the connector. Thanks!
@Artistram3d1
3 жыл бұрын
Bidets are the way to go! Me and the wife love ours. Cheers!
@tonnjabraden2080
3 жыл бұрын
This was excellent, and fixing it myself saved me at least $200 bucks! I really liked the that you explained the fitting sizes and recommended taking the old piece with me to the hardware store. After buying the correct items, its was super easy to replace. Thank you again.
@tonnjabraden2080
3 жыл бұрын
Ps, now feeling so confident im thinking of updating the bathroom and kitchen faucets!
@bc112100
2 жыл бұрын
You just saved me like 200$ on a 3 minute job!!!! Thank you so much!!!!!!!!!!
@lseeber01
4 жыл бұрын
Precisely what I was looking for!
@ManOfThr
4 жыл бұрын
Shout out to the the Clark Kent of home improvement for this helpful vid!
@itshertybro
3 жыл бұрын
Thank you so much, you helped me realize I was actually tightening it instead of loosening the hose that's connected to the bottom of the toilet tank. I felt so dumb, but after watching your video it took two seconds.
@KM-hm7xh
3 жыл бұрын
That's why I watched this video too, I thought I might be turning the wrong way and I was!
@melrow3697
Жыл бұрын
Is it necessary to empty the water out of the tank 1st?
@Scrimpets1
Жыл бұрын
Well, just as helpful as can be! Thank you!
@jerrycoile338
4 жыл бұрын
I like your videos. I've seen others you have done and you make it so simple. One thing I haven't seen discussed however is when connecting a water valve to a copper water line, how tight should you make the connection. Mine was leaking and I didn't know if it was because when removing my vanity, I had turned the nut too tight in the wrong direction before I realized that it turns clockwise when removing and counterclockwise when tightening. I replaced the connection with a new valve, nut and Ferrell and didn't know exactly how far to tighten the connection when putting it back together. Another idiot thing I did without thinking is that once I installed it, I didn't check to see if the valve was open or closed and when I went outside to turn the water back on, I came back into the house and heard a sound like Niagara Falls! I immediately knew what it was and ran back outside to turn the water off. That was one big mistake on my part. The damage it caused was unbelievable! It had stripped the popcorn from my ceiling and water was everywhere! LOL Just wanted to mention to check the valve to see if it is in the on or off position before turning the water back on. LOL
@BUBBLESMOMMOM2011
3 жыл бұрын
Thank you for such a great video! The way you explain everything is so helpful; this is the best video I have watched and understood. My only problem is that I am having a difficult time trying to remove the connector from the main water supply. I am trying to turn it to the left; on the video it looks like you are turning it to the right. Righty tidy, Lefty loosely. What am I doing wrong because I cannot get it to turn. Thank you again!!
@keyannarenee1060
Жыл бұрын
Thank you for posting this! Has anyone had where the piece inside the tank spins when you’re trying to loosen the piece attached to the actual toilet?
@MarcusV741
4 жыл бұрын
How do you uninstall that twist click seal? Maybe that is more difficult to uninstall than the old ones!
@PurnaKhatiwada
3 жыл бұрын
so i was trying to installed my bidet toiled thing from amazon and we have the long metal toilet water supply line that is not bendable and as i was removing it i think i broke bottom portion of it, and its leaking but thanks for the video. I can now install the braided one without problem and leaks.
@freddiemac7473
3 жыл бұрын
Great vid and easily explained. My issue now is, the water supply line I had on my previous toilet is 20", I've upgraded to a newer toilet and it's taller. The 20" supply line doesn't cut it and i need something longer. I haven't been able to find anything longer than 20" is there any way to extend a water supply line from the water feed?
@whathandleUtalkabt
2 жыл бұрын
Omg thank you for clockwise. I was turning lefty Lucy and would not come off.
@kimng2054
3 жыл бұрын
Thank you for wonderful instruction, I just finished install my new supply line!
@TomBohl-sx8mn
Жыл бұрын
Great video, very helpful. Thank you Tom
@nourahroberts6705
Ай бұрын
Fantastic Video!! I have a full size washing machine sitting on a washer dolly that I rolled into my bathroom. I am wanting to connect it to both the hot & cold water lines that are under the bathroom sink, and drain it into my bathtub. Would this connector work for my project? Thank you.
@MrPauley
6 ай бұрын
I appreciate it, any tips to remove a stuck connection at the top?
@johnvassallo7353
4 жыл бұрын
after insalling the conection line i get a slow leak or drip?
@user-ur2ly5jv8p
4 жыл бұрын
Thank you soooo much! I had never even heard of this product before, but I just ordered mine through your link above. I also had never heard of shark bite connectors before watching another video of yours, but thanks to that tutorial, I was able to change the shut off valves in my kitchen. You're a saint. Thank you for making these videos!
@kaseyobrien4594
5 жыл бұрын
What do i do when the new supply line still leaks at connection with toilet?
@Bsantana1989
4 жыл бұрын
I have this issue rn,how did you solve it?🤔
@rahldlegaspi7669
4 жыл бұрын
Same issue right now. Been on the bath for an hour working on this particular part.
@carlindurfee7566
3 жыл бұрын
Try Teflon tape and tightening it further but not positive how did you fix it?
@tdbabe1
Жыл бұрын
Thank you so much for this tutorial!
@yyoo1294
7 ай бұрын
Thank you so much! Mine is still leaking from the top. Do you suggest using a tool to screw it if hand tightening is not enough ?
@photosbyduke
3 жыл бұрын
My supply lines in my bath rooms are 20 years, the old white ones. I don’t see any failure issues such as leaks, discoloration, or fracture on them. Should I replace them as a proactive measure? Following the ... if it ain’t broke don’t fix it. Great tutorial.
@KM-hm7xh
3 жыл бұрын
Yeah, you should, because the alternative is it does break and you have water all over the bathroom floor and probably below
@jamesscheuer8367
Жыл бұрын
Definitely replace them. I’m living the nightmare right now with a failed Watts 6 rib toilet fill valve connector. Failed without warning after about 5-7 years of no issues. My upstairs bathroom flooded and rained down onto my main floor. Was alerted to the problem while watching tv because my smoke detectors went off due to water pouring through them. Make sure your homeowners insurance is paid.
@mikewinn1484
Жыл бұрын
Very helpful information. Thank you!
@valerienash8523
3 жыл бұрын
great info. Thanks.
@nathansimpson2068
2 жыл бұрын
Really went out of your way to avoid saying Ballcock lol
@michaeldelatorre4429
4 жыл бұрын
After closing the supply line valve, don't you need to flush the toilet to reduce the amount of water that runs out the bottom of the tank? Also, no pipe dope, teflon or any kind of seal at either end? I never for sure which is needed if any, for the various types of connections. Great instructional video - thanks!
@Alexandra4JC
2 жыл бұрын
This was very good and helpful. Thank you!
@wilderkensington3359
3 жыл бұрын
What about if it's the nut behind the valve??
@shwe7211
3 жыл бұрын
I didn’t know these rings exists. Thanks a lot.
@jimRaynor6
4 жыл бұрын
Thanks man, very helpful
@annch592
3 жыл бұрын
I noticed you didn't use plumber's tape on the threaded connections to the shut off valve. Is plumber's tape not necessary for this application?
@usadaily135
3 жыл бұрын
Nope.
@autumnhayes
2 жыл бұрын
Thanks so much, sure came in handy today!
@imout671
5 жыл бұрын
Those plastic 7/8 female connections crack. I recently had to redo my moms kitchen because it flooded. I'd use a connector with both metal tips if i could.
@HomeRepairTutor
5 жыл бұрын
was it a Click Seal version or another one, the Click Seal is suppose to prevent overtighteniing which causes cracks
@frozenthorn9619
5 жыл бұрын
I tend to agree with Home Repair Tutor, the reason these fittings are plastic is actually to prevent people from over tightening them, this is true across the board and not limited to Click Seal products. The issue is most people end up doing it wrong anyway, I've seen a lot of home repair videos with people using tools on the plastic because it seems most people don't actually know how tight it needs to be. I haven't used click seal yet, but I like the idea behind it, telling people when it's tight enough should help stop this issue. The plastic fittings usually only crack if you overtighten them and you usually won't know if you did or not until its leaking, which could be months or years down the road.
@preciousmahogany516
4 жыл бұрын
Thank you. Im trying replace my valve for the kitchen sink
@joecity856
4 жыл бұрын
I owe you a beer when you are in New Hampshire
@HomeRepairTutor
4 жыл бұрын
thank you Joe 😀
@KT-sv6jx
Жыл бұрын
Thank You So Much!
@faloncortez
3 жыл бұрын
Exactly what I needed to know. Thank you!
@HomeRepairTutor
3 жыл бұрын
happy to help
@faloncortez
3 жыл бұрын
@@HomeRepairTutor I installed vinyl plank flooring in my bathroom this past Sunday. A friend of mine claimed she knew "exactly what to do" about disconnecting and reconnecting the toilet while I put down flooring. Famous last words! This afternoon there was water all over the bathroom floor. 🤦♀️ Thanks to your video, I don't need rain gear to go in my bathroom. 😄
@tinabeane
3 жыл бұрын
Thanks so much, very helpful video!
@lasalsera-x8d
Жыл бұрын
I went and got the same kit. Mine didn't click but I couldn't twist any more. I hope it's ok. We'll see! lol.
@Layarion
6 ай бұрын
how long should my lines be? i put a new one on that's shorter. it still reaches fine though.
@matthewweitz1949
3 жыл бұрын
Great video
@HomeRepairTutor
3 жыл бұрын
Thanks buddy 👍🏼
@90asdfghjkl
3 ай бұрын
So the issue I’m having is that leaking behind the threads where the supply line freely rotates any help on that?
@retromouseshenanigan2980
Жыл бұрын
I’m replacing copper pipe. Are most of these standard sized so I can just unscrew the copper and replace it with the flexible hose?
@chains6558
Жыл бұрын
Is it ok to use a SS braided flexible water line between a shower shut off valve and shower mixer valve ?
@ilovepizza8263
6 ай бұрын
When I try to unscrew the water supply line nut the faucet handle at the top moves as wel… like it all moves at the same time. How can I I loosen it??
@Only1Jenda
Жыл бұрын
Can a bidet be used to connected with that water supply line? I’m thinking about getting a bidet for a senior citizen bathroom that has your new water supply line installed
@Tony-pk6ql
3 жыл бұрын
Very helpful-thank you.
@tomcat6933
3 жыл бұрын
My toilet is 19 years old. Just replaced the fill valve and know my supply line leaks. I am going to get this supply line. Thanks
@DMing0
8 ай бұрын
What if my line doesn’t have the silver valve that I can twist off to remove the cord?
@ultimatelv27
11 ай бұрын
I think I might have overtighten the seal valve that connects to the toilet fill valve. I can't even untighten it. Any suggestions?
@daver8895
Жыл бұрын
Hi. Bought an old home and the Kohler Aladdin gold vanity faucet is starting to leak from the top of the handles! Every time I turn on, the water starts a slow drip and then faster. Both sides Hot & cold same problem. Anyway, wanted to change the faucet but noticed the supply to the valves is on the very bottom of the vanity and it looks like thin copper flex tubing. Then another thin copper line soldered right up to the faucet. So, my supply lines are thin copper flex pipes. Not the braided lines you have. How should I approach this? Thanks plumbers!
@nipcee8865
4 жыл бұрын
Wow 🤩 great instructional video...THANKS‼️👍🏽👏💧🔧🚽
@PrettyInGrace
3 жыл бұрын
THANK you
@ashishmsukhadia
3 жыл бұрын
Great video, big help!
@freedom888888
2 жыл бұрын
Great videos
@late921
2 жыл бұрын
Thank you!!!!
@dimwitsadvocate6264
3 жыл бұрын
Thank you for this video! Where is your "water supply shutoff" video so I can replace them (@4:38)? I couldn't find it on your channel.
@JimGEDDIS3000
2 жыл бұрын
I am curious how can I get the water lines disconnected from the bathroom faucet as it was over Tightened & difficult with the small space to get to & try to get off. So I am wondering what can I do as I am trying to replace the faucet in the bathroom.
@sherrynordan9821
2 жыл бұрын
I clicked, but water leaks. Help
@VK-zt6sw
3 жыл бұрын
Awesome - thank you very much!
@salamander9575
2 жыл бұрын
Sink portion starts at 4:00
@vonniev0n
3 жыл бұрын
Can the sink water supply line(hot) make it seems like a facet/ washer leak?
@saratitanium5974
3 жыл бұрын
I would love to say this was perfect but you forgot Thread seal tape which is very important. The one thing that did help is the type of wrench I need to remove it.
@WindOfTheWisp_Janine
2 жыл бұрын
Hi Sara...actually, you don't use any type of sealant with compression fittings - it can actually interfere with the seal. These type of faucet connectors have a built in neoprene gasket which seals the connection.
@debbiedebbie9473
Жыл бұрын
Clockwise ( right) to loosen it ??
@VWeezyO
8 ай бұрын
Can anyone tell me what the white piece that connect above the water supply line is called?
@Aggression-hc3yp
4 жыл бұрын
Will this supply lines work on any bathroom sink? I’d like to be done with leaks permanently.
@nycmatch
2 жыл бұрын
The water supply line that was sent to me is not a click seal. It's the old-fashioned nut that you just have to use a wrench to install it. I have tried installing it at least ten times, and it still leaks. What am I doing wrong? Is there a click seal nut that I can get without having to start all over again from scratch?
@samangelo5343
4 жыл бұрын
Do I need to turn water off in the whole house first?
@christopherhudson7355
4 жыл бұрын
Turn valve off like he does in the video.
@Xepent
3 жыл бұрын
It looks like the supply line is connected to the valve?
@usadaily135
3 жыл бұрын
Just did this. You better tighten with wrench when u connect to water supply.
@MegaMijit
Жыл бұрын
I just installed a bidet but the supply line has a major leak at the tank connection since the metal part is loose. Already tried plumbers tape and it didn't fix. Can anyone help??
@asianangler
2 жыл бұрын
what is that part on the wall that you connect the water supply line to call?
@HomeRepairTutor
2 жыл бұрын
shut off valve 👍🏼
@asianangler
2 жыл бұрын
@@HomeRepairTutor if it's leaking, can you fix it by rotating a bit or better to replace it?
@pnaznp
3 жыл бұрын
If it is great , why "stainless steel" cover get rusty and burst???. It flooded my place
@KH-3414
Жыл бұрын
Mine too
@TheWilliamalexander6
Жыл бұрын
I never did this before but I think when doing this we need to empty the water tank completely before doing this
@amsk8life
3 жыл бұрын
What do you do if your supply line looks nothing like that?? And it’s push to activate
@sandrafrances
Жыл бұрын
Mine is still leaking underneath the white bolt at the top. Help.
@stettan1754
3 жыл бұрын
We don't need to wrap the tread with that white Teflon tape?
@fucheduck
3 жыл бұрын
mine is some kind of flexible plastic stuff. but the toilet won't completely flush and gets stoppped up but the line is leaking because when it flushes it leaks near the baseboard just under the line. when I turn the valve off it stops leaking. makes me think the leak is in front of the place where the valve blocks waterflow when shut off. mine is in the wall but loose. makes me think the plumbers will spend weeks ripping out the common wall to do pipe work. COVID-19 means I am screwed!
@KPad87
2 жыл бұрын
How much woulda plumber charge on average to change this supply line ?
@gobabe2396
2 жыл бұрын
I need help with the line but comes up from the floor. Very old house 100 years old Plumber want 6000 To fix this But it’s established the line is not in the wall at all. It’s under see the floor. It must elbow and runs across the kitchen ceiling. The kitchen is right under the bathroom. Nice right
@franciscoparada3332
3 жыл бұрын
My supply line does not have that quick release. Now what do I do?
@samw.8734
Жыл бұрын
Why am I having trouble taking off my older water supply line? It almost feels like it is soldered together, with the fill valve. What can I use to unattach my older one without damaging anything else?
@samw.8734
Жыл бұрын
Or I should have said, what set of pliers or channel locks should I use? Is there a specific one? Knowing my luck I might break the whole thing including the porcelain of the toilet.
@alan21usa-ey5ms
Ай бұрын
I had one of these blow off and flood my bathroom and kitchen. Threading part stayed on the tank but the spinning cock ball "click part" blew off
@jwag7747
2 жыл бұрын
What about old metal water supply lines that won't come off?
@giorgizaqariashvili7225
2 жыл бұрын
I have 1 question is there someone who can answer my question? I need it fast pls today I'm gonna install water pipe next to toilet, it's very small toilet room so pipe is so small too, and water is in it, how can i instal head? I can't stop water, is there any trick? I can't figure it out how to stop water in pipe to work on top of that
Пікірлер: 197