Thanks Soooooooo much for making this video WONDERFUL JOB
@AUDIO2AUTO
2 жыл бұрын
After looking back and being a more skilled mechanic now, one can also remove the stud that the throttle body sits on and it will give room to remove the bottom thermostat bolt from the top. Ratcheting wrench with click switch would be the best option.
@jimviktorlangstrom7662
3 жыл бұрын
Thanx. Always fun to see a tutorial video with text. Keep it up. My mothers uplander suck the hoses together, can it be that there is no thermostat? Ni resistans for the waterpump maybe!?
@AUDIO2AUTO
3 жыл бұрын
Sounds more like a clog causing too much vacuum rather than an opening or not having the thermostat in.
@AUDIO2AUTO
4 жыл бұрын
Pause video at 2:04 to get a picture of everything removed to access thermostat.
@dmoore7519
5 жыл бұрын
A ratcheting box wrench may speed up the lower bolt.
@AUDIO2AUTO
4 жыл бұрын
The ones I have were to long to fit in the space... but definitely would be easier
@JasonSpitzMI50
4 жыл бұрын
@@AUDIO2AUTO Was your Uplander running hot when you decided to change the thermostat also what symptoms wereyou having with that Van ....Thanks?
@JasonSpitzMI50
4 жыл бұрын
Hello Kristopher have a question, Are those 2 quick connect heater hoses connections the same size?
@AUDIO2AUTO
4 жыл бұрын
@@JasonSpitzMI50 Yes I eventually changed the head gasket and it solved the problem.
@AUDIO2AUTO
4 жыл бұрын
@@JasonSpitzMI50 Yes they are the same size. I had to change mine out because they wouldnt seat anymore. But it only like 10 bucks at the parts store.
@13xsurx13
4 жыл бұрын
Do you know where that pcv breather hose goes connected too the one on the air filter
@AUDIO2AUTO
4 жыл бұрын
It's a hole at the top right back of the upper intake.
@charlesburnett5651
4 жыл бұрын
What made you change the thermostat in the first place
@AUDIO2AUTO
4 жыл бұрын
@@charlesburnett5651 Car overheated, I eventually changed out the head gasket and clean the coolant passages and its been running great ever since.
Пікірлер: 18