Straight up & No Technical Nonsense - Thanks Buddy !!!!!!
@sistercalhoun4444
4 ай бұрын
I wish you made a video showing us how you put a transmission drain plug on it... That would have been nice Bro to learn !!!
@blackericdenice
4 ай бұрын
I will try to make one
@voidisyinyangvoidisyinyang885
4 жыл бұрын
I don't have needle nose pliers! This reminds me of the vid of someone taking apart a treadmill to get the DC Motor. I got the free treadmill off craig's list but spent over $100 for tools. haha. My buddy says, "it's an investment." yep.
@percillasamora5358
2 жыл бұрын
u like Chevrolet buddy that's my man like a rock easy to work on cheap parts and the LS is the bum
@evillafane74
Жыл бұрын
ok so I watch your video and I know its 3 years later but I just came across it and hopefully you respond.....I have to say you are hilarious....I love the way you get straight to the point and don't edit to make it look proper or classy....than your like "if you cant see it than o well"...ctfu....any who...lol...when I would put the truck in drive, it would act like it didnt want to go anywhere and than my check engine light came on....code was P0758....2-3 shift solenoid B...was going to just change that one but my mechanic/friend said dont just do 1 do both and MAKE SURE I also change the filter and gasket every time I drop the pan...so here I am watching your video....I changed both and you were not lying when you said the pins are a pain in the butt.....I am about to put back in the old fluid because it dont look bad and there was no metals at the bottom of the pan or on the magnet.....I am just hoping that was the issue.....the reason for my comment was to ask if that does not fix the issue do you have an idea on what else it could be???? Also how do you reprogram the computer??? And do you have to do that when you change out the solenoids??? Thanks for your time and help.
@blackericdenice
Жыл бұрын
I've never had that code. You don't need to reprogram the computer to change a solenoid in a 4L60e.
@timgiles9413
3 жыл бұрын
You looks, sound and act just like my friend Boo. :)
@kevinmetcalf6371
Жыл бұрын
Dude your candor is 😂 funny. I sound the same.way.Good luck
@blackericdenice
Жыл бұрын
The problem was I programed the computer wrong. It has different shift modes build into the computer. I had them too far off. I put all the shift mode togather so it shift fine now.
@Mike-Capz83
5 жыл бұрын
i watch chris fix videos too! lol
@blackericdenice
3 жыл бұрын
I was tired that day and I didn't think what I was doing was going to fix the problem.
@ProjectCarTV
4 жыл бұрын
Did you end up changing either or both valve bodies?
@blackericdenice
4 жыл бұрын
No. The truck is still the same way. I don't drive it much. I'm about to buy a house and I'm going to remove and clean the vb again.
@blackericdenice
3 жыл бұрын
The torque converter broke and the transmission stop pulling. A shop rebuilt it and it was still doing the same thing. They had to take it apart and use a new case. The case was leaking inside.
@chiefstandingkibull8145
4 ай бұрын
Kudos to you, bro for your help. 🪶🔥🪶
@blackericdenice
4 ай бұрын
The problem was I program the wrong. I had the 4 shift mode program wrong.
@derekspeers6375
Жыл бұрын
I had this similar problem with mine and I've already done the shift solenoids when I flushed my transmission fluid I thought it was my rear axel cuz it needed a new cover. But instead of doing this in 2nd gear it'd do it from a stop. Literally happened for the entire 2 years I had it. Finally got a code for 02 sensors low and high voltage, of course the sensors themselves were just bad. I guess during my drives it didn't happen enough to throw codes. Caused poor acceleration. And finally started stalling on me, after i thought it was the throttle body, this incident threw the codes. Hopefully you got it fixed or this helps you later. I'm at about 176,000 miles and the only major issues thus far that I've had was fan clutch, 02 sensors, and the vehicle sways/wonders. I replaced my fan and water pump seeing as how my water pump would've needed to be replaced soon anyways. That didn't fix the issue, so I replaced the relay. That also didn't fix the issue, I tried looking up a solution and couldn't find one but found the problem myself. Turns out no one tells you it also has a fuse and it was blown so it's fixed. I'm still trying to figure out what's up with my swaying/wondering issue. Any info on that would be greatly appreciated. Note: I've replaced bushings, ball joints, sway bar links, rack and pinion and trailing arms/track bar I'm thinking maybe my rims are bad but not like visibly bad probably cuz they're old. It's not the tires cuz I've replaced my tires twice just cuz not that it was necessary. Or the place I took it to didn't align it correctly which I've heard does happen though it's done this before I did the work. Could the sway bars be bent maybe? 04 trailblazer 4.2l Please lmk what your thoughts are on this.
@boblee2550
Жыл бұрын
Regarding swaying and wandering, rotate your tires and see if anything changes. Could be a bad tire, not very common but I have seen it before.
@neezyf4074
2 жыл бұрын
Amazing brother thanks for a great vid
@michaelscott8129
2 жыл бұрын
There are 3 other silenoids in the 4L60E Automatic Transmission there are 2 in the back which are round in shape 1 is a torque selinoid and the other is a low shifting selinoid and where u installed the 2 new selinoids there is another that stands up with a metal base that bolts in place it has a long plastic stem on it try replacing the other 3 selinoids if that doesn't help then it's probably the wiring harness because a bad wiring harness can cause the exact same problems as bad shifting selinoids
@blackericdenice
2 жыл бұрын
I had the computer programmed wrong.
@michaelscott8129
2 жыл бұрын
@@blackericdenice I know that feeling all to well that's why I hate computer controlled vehicles it's so easy to completely screw up everything or fry something plus a royal bitch to work on depending on what part it is your working on and replacing
@blackericdenice
2 жыл бұрын
@@michaelscott8129 I love computer control cars. Once you understand how they work. They are interesting. I can program my Trailblazer to shift when I want it too. How hard I want it too and how quickly. I don't have install a shift kit. kzitem.info/news/bejne/sWN44J1jspZhfKQ
@reyalenmusic
Жыл бұрын
Do you know if changing this would help mine drive on D ? It works on reverse and manually but not on Drive
@dannypruitt819
Жыл бұрын
Maybe the big c clip that holds clutch pack is has broke or bad clutch pack like 3rd gone out
@blackericdenice
Жыл бұрын
I had the computer programed wrong. It has 4 different shift modes. I had them too far part.
@robertmoreno9876
4 жыл бұрын
And are a and b the same ones
@evillafane74
Жыл бұрын
Yes
@CP-pb3pj
5 жыл бұрын
Just curious, how many miles on that transmission?
@blackericdenice
5 жыл бұрын
C P 176,000 on the stock transmission. I’ve had 3 problems with this valve body. The first problem was at 68k. It had a 2-3 shift flair.
@lee28.78
3 жыл бұрын
Mine just started shifting real hard out of first gear into second and as I accelerate a little bit you could see the RPM start jumping between 2 and 3 RPMs and not wanting to go he could feel and hear the engine start the wine I got an 04 Envoy do you think it's a solenoid problem our best guess what else it could be?
@blackericdenice
3 жыл бұрын
Change your filter whenever your 4L60e start to slip.
@joser.2396
3 жыл бұрын
Awesome video guy . My car overheated and burned transmission fluid & I didn’t replace fluid for a while , now when I’m on the highway going at 60-65mph is like is forcing itself, my rpm are at over 3k , can that be a solenoid?
@blackericdenice
3 жыл бұрын
If it shift to 2nd gear. Probably not.
@joser.2396
3 жыл бұрын
@@blackericdenice thank you 🙏🏻
@joser.2396
3 жыл бұрын
@@blackericdenice oh btw it shift second gear but I have to let go of the accelerator and then pressed it again, like if it was an standard.
@blackericdenice
3 жыл бұрын
@@joser.2396 Have you change the filter?
@randytolin3059
2 жыл бұрын
Change. The pressure solenoid. And it will solve your problem
@blackericdenice
2 жыл бұрын
No the force motor was fine. I programmed the computer wrong using HP Tuner.
@matth1851
3 жыл бұрын
pass side on transmission tail is speed shift sensor and i did everything you did but replaced the speed sensor and its like new.
@blackericdenice
3 жыл бұрын
I found out my tranny does need a rebuild. I will be doing it soon. It stop pulling 2 weeks ago. I will be uploading video of the rebuild.
@blackericdenice
3 жыл бұрын
I took it to a shop and they rebuilt it.
@blakecable7088
3 жыл бұрын
Try cleaning the throttle body and do a relearn As far as holding first too long
@blackericdenice
3 жыл бұрын
I had the transmission part of the pcm programed wrong.
@blackericdenice
3 жыл бұрын
The case was bad.
@appliancedude63
2 жыл бұрын
How do you do a relearn?
@blackericdenice
2 жыл бұрын
@@appliancedude63 You don't have to with a 4L60e. BTW, the problem was the case was leaking inside.
@robertstark9454
4 жыл бұрын
Thank you
@voidisyinyangvoidisyinyang885
4 жыл бұрын
Someone has a vid on replacing the accelerator piston on the Transmission TB - and that fixed a similar problem? Same thing - just took the pan off and get in there. thanks
@blackericdenice
3 жыл бұрын
I've never heard of an accelerator piston.
@robertmoreno9876
4 жыл бұрын
Did u find out which ones b
@jose-ks9ie
2 жыл бұрын
I have question bro i have a trailblazer it starts but dies in gear
@blackericdenice
2 жыл бұрын
Clean the throttle body
@reyalenmusic
Жыл бұрын
Do u have any ida why mine don’t want to drive on D it only reversed and drives manually
@blackericdenice
Жыл бұрын
NO
@reyalenmusic
Жыл бұрын
@@blackericdenice my problem was similar to yours what did u end up fixing it with ?
@blackericdenice
Жыл бұрын
@@reyalenmusic I change the shift points. The computer has 4 shift modes. I had program all 4 mode to shift the same.
@reyalenmusic
Жыл бұрын
@@blackericdenice thank you !
@elsucko6597
5 жыл бұрын
Its been over a month. Hows the transmission shifting at this point? I have 04 Trailblazer with similar problem, shifting 2nd to 3rd.
@blackericdenice
5 жыл бұрын
It shift better but it still not 100%. I think It need another valve body.
@crystalrogers6229
3 жыл бұрын
Same problem as Walter has on mine except its a 05
@chandlercostanza7307
4 жыл бұрын
Driving along doing 60, went to pass a slower moving car, 2004 trailblazer shifted into overdrive then nothing. Engine running but zero acceleration, had to coast to the side of the road. No reverse or drive now. Any advise??
@blackericdenice
4 жыл бұрын
Rebuild time
@anthony5reece
3 жыл бұрын
Shift cable bushing maybe? That would be an easy fix
@christophercrawford2736
2 жыл бұрын
@@blackericdenice I hope not. I basically just had the same issue. For a couple weeks it’s randomly felt like it’s stuck in 3rd or 4th gear when coming to a stop but manually shifting it down to 1 then up back to D would get it driving normally again. Now I’m not getting anything at all. Stopped at the red light. Pulled off the freeway off-ramp and then lost all power as I was completing the turn onto the street. Now I don’t get any gears including reverse. Engine is running fine. Coasts in neutral just fine. Could this possibly be one of those 2 solenoids or a different solenoid? I’ve had a po128 for awhile(probably unrelated to current issue) and now that I’m not getting any power to the wheels I’ve got po894 and po741. If you take the time to read this and provide any insight, I’ll be immensely grateful.
@blackericdenice
2 жыл бұрын
@@christophercrawford2736 My problem was because I programed the transmission wrong. Po128 has nothing to do with your transmission. If your transmission is not pulling anymore. It need to be rebuild.
@christophercrawford2736
2 жыл бұрын
@@blackericdenice so you think the solenoids aren’t the culprit? What do you think it is? Torque converter? Something deeper in the transmission?
@MitzvosGolem1
5 жыл бұрын
good job
@MitzvosGolem1
5 жыл бұрын
may have to reprogram ecu drivetrain control module relearns shift points
@blackericdenice
3 жыл бұрын
Part of the problem was the pcm has 4 shift tables and each one was set differently. After setting all of them the same. The transmission will at the right speed every time now. The second problem was the case was cracked and leaking inside. This fixed the shift to 2nd. slip and bump problem. I had to take it to a trans shop. It took him 3 times to fix it.
@deloreanstone8574
2 жыл бұрын
So what was the issue?
@blackericdenice
2 жыл бұрын
The computer has 4 different shift setting. I had 3 set differently.
@johnjane169
2 жыл бұрын
What was those parts numbers
@blackericdenice
2 жыл бұрын
I don't remember the part number. A trans shop rebuilt my tranny and I still had the problem. The problem was the case had a leak inside.
@martinperez3444
4 жыл бұрын
So what was the problem?
@blackericdenice
4 жыл бұрын
Still have not fixed it yet.
@blackericdenice
3 жыл бұрын
I had the computer programmed wrong and the case was leaking inside.
@tracyspencer5611
3 жыл бұрын
I have a 04 gmc envoy when I put it in gear it just revs up
@blackericdenice
3 жыл бұрын
It need to go to a trans shop
@tracyspencer5611
2 жыл бұрын
@@blackericdenice its in the shop now
@jorgeromeroromero1694
4 жыл бұрын
Como bajar la tramitación
@blackericdenice
4 жыл бұрын
Speak English or your comment will be removed
@christophercrawford2736
2 жыл бұрын
@@blackericdenice he asked how to remove or drop the transmission
@blackericdenice
2 жыл бұрын
@@christophercrawford2736 He is a troll
@christophercrawford2736
2 жыл бұрын
@@blackericdenice possibly.
@davidepperson7761
3 жыл бұрын
when my gets real hot it will go in n
@blackericdenice
3 жыл бұрын
What year and make of your car?
@therealcomediancandylady79
6 ай бұрын
Fast forward.... too much talking... get straight to the point😢😢
@blackericdenice
6 ай бұрын
Upload a video on the subject.
@tULIPAN2424
Жыл бұрын
Good job Men🦾, To day my mission is solenoid B my saab 97x when change gear d or r goes out my Comp Failcode P0977 and p0700,
Пікірлер: 99