If you guys want to pick up the hub remover tool or U-joint check them out here remover tool: amzn.to/3FhouMZ Front u-joint: amzn.to/3K944cH
@Dimination36
2 жыл бұрын
Gotta say, watching you do those looked exactly like I have done them for almost 16yrs. Quick and simple process and yet is one of the most overlooked items on the front end. Great job and great tutorial!
@RacingRamFam
2 жыл бұрын
Yes totally agreed! They also cause a lot of other issues thanks man!
@chrisnett8715
7 ай бұрын
how long does it take ,shop quoted 6-8 hrs
@Dimination36
7 ай бұрын
@@chrisnett8715 depends on the condition, but it usually takes me 45mins to 1.5hrs.
@oneguysopinionyup7252
Жыл бұрын
That starting the truck & using the power steering and socket WAS GOLD🥳 THANK YOU SIR 🖖☮️
@hicktowncustomz
2 жыл бұрын
If it had not been for your power steering trick I would not been able to complete my task. You sir, or a genius! Thanks for the tips the video is awesome!
@RacingRamFam
2 жыл бұрын
Ya man glad it helped!
@lukestarr8333
9 ай бұрын
Man I've watched less than a minute of your video and can already tell that you're the best on KZitem at helping the folks out and! Good work man!
@ang3lbass
2 жыл бұрын
I know nothing about cars and this was easy to understand and follow, I just paused and hit google up for any parts I wasn’t familiar with. Thanks for helping me be more educated when I am speaking with the professionals working on my van 💕
@RacingRamFam
2 жыл бұрын
Ya glad it helped!
@Chris-d6i
Ай бұрын
Thanks saved me a lot of time and effort
@RacingRamFam
Ай бұрын
@@Chris-d6i anytime
@DarrensTruckzs
2 жыл бұрын
Right on fella.. we’ll done .. like you say after taking it apart for the first time an keeping them anti seized makes for a easy come apart next time .. I used to have the same truck as yours an I remember doing that job .. the first time was awfull as it was all seized but I anti seized an then after that good to go .. but now I have the 2 wheel drive an don’t have to worry about it . An I don’t obviously plow anymore so it’s not missed .. I hardly drive my truck I winter cause my health condition is worse in winter so I don’t get too far so my 2002 truck I have now is only got 85 thousand original miles on it 👍 anyways I always enjoy your videos thanks man cheers
@RacingRamFam
2 жыл бұрын
That’s awesome trucks prob mint at that mileage def have a gem on your hands! Thanks man
@karlsalsbury
Жыл бұрын
This was the coolest dude on KZitem,thanks for the video
@RacingRamFam
Жыл бұрын
Was? 😦
@martinflaherty7755
Жыл бұрын
GREAT VIDEO!!!
@ThomasBartysjr-xn9ij
Жыл бұрын
Thanks Bubba
@blankredacted.9685
2 жыл бұрын
Another great how too. Love seeing this truck.
@RacingRamFam
2 жыл бұрын
Thanks man! Plow truck need some lovin lol
@thereeloutdoors_4525
11 ай бұрын
The axle nut wasn’t 1 1/16th, Mine ended up being 1 11/16
@RacingRamFam
11 ай бұрын
Yes it’s 1 11/16 I miss said it
@thereeloutdoors_4525
11 ай бұрын
@@RacingRamFam The video did help me a lot though thank you!
@rayfalcon777
2 жыл бұрын
Bro 1-1/16 my rearend dude thats like a 2" ir 2-1/16" nut size just went to do mine and found out its not what you said it was
@devinhenry6603
Жыл бұрын
Yeah guys a fuck it’s not 1 1/16
@eltoro777
4 ай бұрын
Good video.. just a trick I've learned. SKIP THE AXLE CASTLE NUT. just leave the hub attached to the stub end of the axle joint... Saves a bit of hard work and skips the retorque of the axle nut to 190ftlbs.... most people aren't capable of RETORQUEING TO THE SPEC.
@kimbercrenshaw8276
2 ай бұрын
How do I get to the u joint
@roymoody5828
2 жыл бұрын
Thank you!
@Jstew181
Жыл бұрын
Great video just a little more detail Would be nice.. 2 questions. No worries about the u joint being damaged while Hammering? Also no certin way the splines line up goin back in?. Also would have been nice if it wasnt sped up knocking the u joints out. Other than that good vid
@hummer4x4guy
Жыл бұрын
What’s the u joint part #? That would be good to add for those watching the video. Or future ones.
@RacingRamFam
Жыл бұрын
It’s in the description of the video
@freeslave1968
Ай бұрын
Those 3 hub bolts are very difficult to find. Dont lose or brake any.
@RacingRamFam
Ай бұрын
@@freeslave1968 false here the link amzn.to/4ctU2QV
@freeslave1968
Ай бұрын
@@RacingRamFam wow thanks.
@RacingRamFam
Ай бұрын
@@freeslave1968 any time
@loganr8576
Ай бұрын
One question to any mechanic do you have to use just c-clips or can you the top cap style
@RacingRamFam
Ай бұрын
@@loganr8576 top cap style? There just c-clip in
@loganr8576
Ай бұрын
@@RacingRamFam I meant snap style u joint not top cap
@Benrose72490
Жыл бұрын
Are the axles both the same size for each side passenger side and driver side? I need to replace both front axles on my father's 2000 Dodge Ram 1500 sport edition with the 5.9. And it looks like the axles could be different lengths but I'm not sure. Any help will be helpful.
@RacingRamFam
Жыл бұрын
The axles shafts are different lengths and styles. U-joints are the same the passenger side axle is a two piece design
@cristianramirez9577
2 жыл бұрын
what made u replace the u joints what truck shaking around 40mph-50mph?
@rodolfobarron1386
18 күн бұрын
Can I take them off, and not put them back in?
@dstdismount8164
2 жыл бұрын
Hey iv got a question about whitey so its a gas 318 5.2? and you can push a lot of power out of it cause i was told you cant push a lot of power out of them befor you hit a wall so what did you do cause i have a dakota with a 5.2 i want to build but im afraid if i should go with 5.2 or try to get a 5.9 or if you thing a 5.2 would be just fine?
@RacingRamFam
2 жыл бұрын
This is a stock 5.2 318 magnum yes gas but e85. Head studs and cams all that’s done to the motor and 15psi of boost and 50 shot of nitrous. She handles it like a tank
@dstdismount8164
2 жыл бұрын
@@RacingRamFam and what are the numbers you have on it aswell how much power is she pushing what ate the quarter and 0 to 60 times?
@RacingRamFam
2 жыл бұрын
@@dstdismount8164 check the videos out!
@gamerdad25
2 жыл бұрын
How long you would say this took you coss my mechanic said it’s going to take 7 hours
@RacingRamFam
2 жыл бұрын
That’s def to much even for both sides. It pays 3.9hrs to do both front axle u-joints and that’s all data time. So he’s def ripping you off. So it’s about 2 hrs a side
@josephtedesco7663
10 ай бұрын
It’s only a 1inch and 1/16 axel socket?
@RacingRamFam
10 ай бұрын
1 and 11/16 I miss pronounced
@josephtedesco7663
10 ай бұрын
Yeah thank you! I saw that as I read more comments!
@hoplite3239
Жыл бұрын
Yall need a press lol ....just sayin
@Heywoodjablowme420
5 ай бұрын
In theory what would happen if i didnt replace the axle? I know itll mess up the gears but if they're already messed up like couldnt I just send it?
Пікірлер: 56