To replace the bushings, it is more convenient to remove the lever completely, this will require the following tool: end heads for 16, 18. But you can do without removing, unscrew only 3 bolts of the support and knock the bushings off the lever. On one lever, the bushing got stuck, on the second lever, the wear was stronger and the support was removed effortlessly by hands without a tool.
=======================
Instructions for tightening torques of suspension bolts from ELSA disk.yandex.ru/i/qt-6C5T0-v4Amg
=======================
Timecodes:
0:00 Start
0:18 Spare parts and tools
1:08 Removing the right support
3:20 bushing replacement
4:49 Removing the left lever assembly
5:36 Pressing the old bushing, pressing the new one
6:35 Installing the lever, tightening the bolts with the right moments
=======================
To press the new bushings, I used a press with mandrels measuring 80 x 70 and 58 x 48.
Articles of levers assembled: left 1K0407151BC, right 1K0407152BC
Articles of bushings FEBI 31253 @ferdinandbilstein
The article of the support assembly: left 1K0199231J, right 1K0199232J
=======================
My blog on DRIVE2 www.drive2.com/users/mark47/
Негізгі бет Автокөліктер мен көлік құралдары Replacement of rear bushings of front levers Audi A3 / Skoda / VW
Пікірлер: 16