I was sharing your frustration while watching you work on this Hoppe lockset. I hate these things with a passion. Every summer I used to get 2 or 3 to repair. Hated them. Thank you for sharing. I don’t feel so bad about myself now, fighting this lock. Be safe out there.
@paulfantin8158
Жыл бұрын
Got to subscribe. I love these things. I hate these things. I wish I could work on these every day. Then I could get real good at them. Not to many experts out there I bet. And if the doors are not in perfect alignment or are some settling has occurred, good luck.
@Orisman9
14 күн бұрын
My inner top and bottom poles that help lock the doors, well the bottom pole has locked itself in the bottom of the door and I don’t know how to remove it from bottom of the door. The top pole is fine, it’s just the bottom lock pole. Do you have a suggestion?
@rogerhupp3115
2 жыл бұрын
I might have to repair a tongue latch version soon. I still have to fill out the Hoppe form to make sure I order the right one for the customer. It's one of the automatic ones that pull the deadbolt in if you leave it in the extended position when closing the door. This should be fun.
@selock
2 жыл бұрын
so many measurements :)
@geraldskinner63
Жыл бұрын
Installing my first Hoppe MP lock this next monday.. 😬 Why the tapping on the levers after the re-install?
@selock
Жыл бұрын
freeing it up a bit, must have been a bit tight
@yenbbc8840
3 жыл бұрын
thanks for this vid. i'm getting info so i can fix mine.
@billinphoenix255
5 жыл бұрын
You're having too much fun ! When done it works, nice job.
@alexanderjunior1105
3 жыл бұрын
i know it's quite off topic but do anybody know a good place to watch new tv shows online ?
@bethanyhopkins1495
Жыл бұрын
Learned this the hard way…the deadbolt will only function when the door is closed and handles are on. Pull up on the handle to engage the upper and lower locks, then you can turn the deadbolt. 3 hours later and we have a functioning door again. I really hope this Hoppe company goes out of business
@kegfreak3728
Ай бұрын
I just fought the damn deadbolt for two hours! I am changing from a different lock and this is so frustrating!
@daoustlocksmith6828
2 жыл бұрын
Hey Jason. I’m a big fan and although I’ve been into locksmith in gin Canada for 22 years I’m still learning and a lot from your videos. Keep up the good work. BTW. I’ve been looking and can’t seem to find a rasp rotary bit like the one you removed from your drill. Can you tell me where you bought yours? Thanks Jason !
@selock
2 жыл бұрын
This is the one I mainly get, holds up pretty decent. I’m sure there are better but 🤷♂️ Vermont American 16671 1/2-Inch by 7/8-Inch Useable Length Domed Cylinder Metal 1/4-Inch Shank Rotary File for Drill a.co/d/aSf09FP Thanks for watching!
@daoustlocksmith6828
2 жыл бұрын
@@selock thanks Jason for the quick response. I will definitely keep watching!!
@Payner2644
Жыл бұрын
I have a patio door with this locking system and pulling the handle up to turn the dead bolt has become difficult. Anyone know what would cause this and how to fix it?? Thanks!
@selock
Жыл бұрын
Sounds like you first need to check the strike areas at the top & bottom and frame edge first. If it’s hitting the strike anywhere you will absolutely break your lock if you keep forcing it. Hold door open, press the little tab under it above latch and lift handle. If it works easily then your door is sagging. Tighten hinge screws them check. You will likely need to lower your frame edge strike plate a small amount
@Payner2644
Жыл бұрын
@@selock I have checked those areas and ground off some material at the bottom of each striker, but it didn't help. If the door is open the system works easily.And the door is not sagging at all.
@simoncowan9612
Жыл бұрын
Toe and heel the door, it sounds as if it has dropped slightly
@LockPickingPatrolman
3 жыл бұрын
I heard these being cussed in the shop today 🤣
@selock
3 жыл бұрын
Measure what? “Literally every friggin thing plus everything else, and then that other measurement you didn’t even think of”
@LockPickingPatrolman
3 жыл бұрын
@@selock haha! The boss won’t even touch them. The other locksmith in the shop took the job and quoted high hoping she wouldn’t get it but the person said “sure ok!” She doesn’t like dealing with them either lol
@janetyilee
5 жыл бұрын
what company can install for Hoppe lock in Bergen County NJ?
@montanaboobie
4 жыл бұрын
Where do you get one?
@selock
4 жыл бұрын
Montana Matthew I normally would be helpful and let you know but it would be to slow slow so figure it out yourself
@montanaboobie
4 жыл бұрын
Sorry, it just a lot of slow scenes. To many for me. Sorry about that remark. I did figure it out. Broken gear inside the lock cylinder.
@williamravenel8690
4 жыл бұрын
In the future it would be great if you (1) had someone else operate the camera (2) edited (3) commented about what you’re doing step-by-step
@selock
4 жыл бұрын
William Ravenel LOL 😂 OK then
@montanaboobie
4 жыл бұрын
What a slow slow video
@legrasjp
Жыл бұрын
That was an awful video. You would think a big company like Hoppe would make a professional video.
Пікірлер: 33